Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Infinity Reference REF-3032CFX 3-1/2" 2-Way Car Speakers. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your speakers.
Característiques del producte
- Edge-driven, textile tweeters: Designed to produce smooth, clear high frequencies.
- Adjustable tweeter output level: Allows for 0dB or +3dB adjustment to optimize system linearity based on installation location or listener preference.
- Plus One woofer cone architecture: Features a larger overall speaker-cone area than comparable models, resulting in higher sensitivity, increased low-frequency output, and enhanced musical character.
- Optimized frame size: Compact design engineered to fit most factory speaker locations in a wide range of vehicles.
- Disseny coaxial: Integrates tweeter and woofer for a simplified installation and cohesive sound.
Què hi ha a la caixa
The package for your Infinity Reference REF-3032CFX speakers includes:
- REF-3032CFX-KL (Pair of 3-1/2" 2-Way Car Speakers)
Instal·lació (Configuració)
Proper installation is crucial for optimal performance. If you are unsure about any step, it is recommended to seek professional assistance.
Orientacions generals:
- La seguretat primer: Desconnecteu la bateria del vehicle abans de començar qualsevol treball elèctric.
- Ubicació: These speakers are designed to fit most factory 3-1/2 inch speaker locations. Verify the mounting depth and diameter before installation.
- Cablejat: Connect the speaker wires to your car audio system's output. Ensure correct polarity (positive to positive, negative to negative) to prevent phase issues.
- Muntatge: Secure the speakers firmly in their designated locations using appropriate hardware. Avoid over-tightening screws.
- Prova: After installation, reconnect the battery and test the speakers at a low volume to ensure they are functioning correctly before reassembling interior panels.
lateral view of the speaker, illustrating its compact design and magnet assembly. This view helps in assessing mounting depth requirements.
posterior view of the speaker, displaying the product label with model number REF 3032cfx, power handling (25W RMS, 75W Peak), and manufacturing information. The part number ES3271-KH0000003-B is visible on the magnet.
Davant view of the speaker, highlighting the Plus One woofer cone and the central edge-driven textile tweeter. The 'REFERENCE' branding is visible on the tweeter.
Funcionament
Once installed, your Infinity Reference speakers will operate as part of your vehicle's audio system. Adjust audio settings on your head unit or amplifier to achieve desired sound quality.
Tweeter Output Level Adjustment:
The REF-3032CFX speakers feature an adjustable tweeter output level. This allows you to fine-tune the high-frequency response. Depending on your installation location and personal preference, you can set the tweeter output to 0dB (flat) or +3dB (boosted). Refer to your speaker's specific wiring diagram or the speaker itself for the adjustment switch or jumper location.
Manteniment
Your Infinity Reference speakers require minimal maintenance to ensure long-lasting performance.
- Neteja: Feu servir un drap suau i sec per netejar suaument les reixetes i els cons dels altaveus. Eviteu utilitzar productes químics agressius o netejadors abrasius.
- Protecció: Ensure speakers are protected from direct sunlight, extreme temperatures, and moisture.
- Inspecció: Comproveu periòdicament les connexions dels altaveus per detectar qualsevol signe de corrosió o soltura.
Resolució de problemes
If you experience issues with your speakers, consider the following common troubleshooting steps:
- Sense so: Check all wiring connections to ensure they are secure and correctly polarized. Verify that your amplifier or head unit is powered on and functioning.
- So distorsionat: Reduce the volume level. Check for proper gain settings on your amplifier. Ensure speaker wires are not frayed or shorting.
- Greus febles: Confirm correct polarity of speaker connections. Ensure the speakers are properly sealed in their mounting location.
- Sense altes freqüències: Check tweeter connections. Ensure the tweeter output level is not set to 0dB if you prefer a brighter sound.
If problems persist after attempting these steps, consult a professional car audio technician.
Especificacions
| Especificació | Valor |
|---|---|
| Nom del model | REF-3032CFX |
| Tipus d'altaveu | Coaxial |
| Mida de l'altaveu | 3.5 polzades (87 mm) |
| Manipulació d'energia (RMS) | 25W |
| Maneig de potència (pic) | 75W |
| Impedància | 3.0 ohms |
| Sensitivity (@ 2.83V) | 91 dB |
| Resposta de freqüència | 85 Hz - 21 kHz |
| Material | Polypropylene, Paper |
| Pes de l'article | 1.6 lliures |
| Dimensions del producte | 17 "P x 15.25" W x 9.75" H |
| Fabricant | HARMAN |
Garantia i Suport
Your Infinity Reference REF-3032CFX speakers come with a Garantia limitada. For specific terms and conditions of the warranty, please refer to the warranty card included with your product or visit the official Infinity weblloc.
Per a assistència tècnica, assistència per a la resolució de problemes o reclamacions de garantia, poseu-vos en contacte amb el servei d'atenció al client d'Infinity a través del seu servei oficial. weblloc web o la informació de contacte que es proporciona a l'embalatge del producte.