Introducció
The Riwbox WT-7S Bluetooth Headphones are designed for an engaging audio experience. Featuring LED lights that synchronize with music, these foldable headphones offer both wireless Bluetooth and wired connectivity options. This manual provides instructions for proper use and care.

Image: Riwbox WT-7S Bluetooth Headphones in pink and green, showcasing the LED lights on the earcups.
Què hi ha a la caixa
Verifiqueu que tots els elements siguin presents al paquet:
- Built-in microphone Bluetooth headphones
- AUX 3.5mm analog audio cable
- Cable de càrrega tipus C.
- Guia ràpida i manual d'usuari (aquest document)
Producte acabatview
Familiarize yourself with the headphone's components and controls.

Image: Detailed diagram illustrating the location and function of all controls and ports on the Riwbox WT-7S headphones.
- Interruptor ON / OFF: Located on the left earcup.
- Micròfon: Integrat per a trucades de mans lliures.
- Indicador LED: Mostra l'estat de càrrega i l'estat de l'emparellament Bluetooth.
- Port de càrrega tipus C: Per carregar els auriculars.
- 3.5mm Audio AUX Port: Per a connexió amb cable.
- Botons de control:
- Long press to open/close LED light.
- Press to play/pause music; press to answer/hang up calls.
- Short press for volume up (+).
- Premeu llargament per a la següent cançó.
- Short press for volume down (-).
- Prem llargament per a la cançó anterior.
Configuració
1. Càrrega dels auriculars
Before first use, fully charge the headphones. Connect the provided Type-C charging cable to the headphone's charge port and the other end to a USB power source. The LED indicator will show charging status and turn off when fully charged.
Note: A full charge takes approximately 1 hour.
2. Emparellament Bluetooth
- Assegureu-vos que els auriculars estiguin apagats.
- Press and hold the ON/OFF button until the LED indicator flashes blue and red, indicating pairing mode.
- Al dispositiu (telèfon intel·ligent, tauleta, PC), activeu el Bluetooth i cerqueu els dispositius disponibles.
- Select "Riwbox WT-7S" from the list of devices.
- Un cop connectat, l'indicador LED mostrarà una llum blava fixa o parpellejarà lentament.
Els auriculars intentaran tornar a connectar-se automàticament amb l'últim dispositiu emparellat quan s'engeguin.
Instruccions de funcionament
Mode Bluetooth
- Encès/apagat: Utilitzeu l'interruptor ON/OFF.
- Reproduir/pausar música: Premeu el botó Reproduir/Pausa.
- Control de volum: Premeu breument els botons de pujar el volum (+) o baixar el volum (-).
- Seguiment anterior / següent: Long press the Volume Up (+) for next track, and Volume Down (-) for previous track.
- Respondre / finalitzar trucades: Premeu el botó Reprodueix/Pausa per respondre o finalitzar una trucada.
- Control de llum LED: Long press the dedicated LED light button to turn the LED blinking effect on or off. Turning off the LEDs can conserve battery for longer music playback.
Wired Mode (AUX)
When the headphone battery is depleted or if a wired connection is preferred, use the provided 3.5mm audio cable.
- Connecteu un extrem del cable d'àudio de 3.5 mm al port AUX dels auriculars.
- Connecteu l'altre extrem al connector d'àudio de 3.5 mm del dispositiu.

Image: The Riwbox WT-7S headphones demonstrating wired connectivity using the 3.5mm audio cable, useful when the battery is low.
Note: In wired mode, the headphone's built-in controls (volume, track skip, LED lights) may not function, and control will be managed by the connected device.
Manteniment
- Neteja: Use a soft, dry cloth to clean the headphones. Avoid using abrasive cleaners or solvents.
- Emmagatzematge: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures. The foldable design helps minimize storage space.
- Cura de la bateria: Per allargar la durada de la bateria, eviteu descarregar completament els auriculars amb freqüència. Carregueu-los regularment, fins i tot si no els feu servir durant períodes prolongats.
- Cura del cable: Manipuleu els cables amb cura. Eviteu doblegar-los bruscament o estirar-los excessivament per evitar danys.
Resolució de problemes
| Problema | Solució |
|---|---|
| Els auriculars no s'engeguen. | Ensure the headphones are charged. Connect the charging cable and allow it to charge for at least 10 minutes before attempting to power on again. |
| No es pot emparellar per Bluetooth. |
|
| No hi ha so en mode Bluetooth. |
|
| No hi ha so en mode amb cable. |
|
| Els llums LED no funcionen. | Long press the LED light button to ensure the feature is enabled. If the battery is very low, the LED function might be automatically disabled to conserve power. |
Especificacions
| Número de model | WT-7S |
| Marca | Riwbox |
| Tecnologia de connectivitat | Sense fil (Bluetooth), amb cable (AUX de 3.5 mm) |
| Versió Bluetooth | 5.4 |
| Interval Bluetooth | 10 metres |
| Mida del controlador d'àudio | 40 mil·límetres |
| Resposta de freqüència | 20 Hz - 20 kHz |
| Impedància | 32 ohms |
| Sensibilitat | 88 dB |
| Temps de càrrega de la bateria | 1 hores |
| Durada mitjana de la bateria | 10 hores |
| Pes | 210 g |
| Material | Eco-friendly plastic, high-protein sponge, breathable leather |
| Característiques addicionals | Foldable design, Built-in microphone, LED lights |
Garantia i Suport
The Riwbox WT-7S headphones come with a 1 anys de garantia del fabricant. For warranty claims or technical support, please contact the seller or manufacturer directly through their official channels.
For further assistance, refer to the manufacturer's weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.
Vídeos de productes
Riwbox WT-7S Headphones Overview by Cotico
Vídeo: Un funcionari ha acabatview of the Riwbox WT-7S headphones, highlighting features like LED lights and microphone. Provided by Cotico, the seller.
