Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your Samson PXD1 Wireless Lavalier Microphone Transmitter. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its performance. The PXD1 is designed to capture audio wirelessly and transmit it to your Mac or Windows computer via a compatible USB receiver (sold separately).
Contingut del paquet
Verifiqueu que tots els elements que s'enumeren a continuació siguin presents al vostre paquet:
- Samson PXD1 Wireless Lavalier Microphone Transmitter
- micròfon de solapa
- Cable de càrrega USB
- Manual d'usuari (aquest document)
Producte acabatview
The Samson PXD1 is a compact and lightweight beltpack transmitter designed for wireless audio capture. It operates on the 2.4 GHz frequency band, providing reliable digital audio transmission.

Figure 1: Samson PXD1 Wireless Lavalier Microphone Transmitter. This image shows the compact design of the PXD1 transmitter unit.
Components clau:
- Botó d'encesa: S'utilitza per encendre i apagar la unitat.
- LED d'estat: Indicates power, battery status, and pairing status.
- Entrada de micròfon: 3.5mm jack for connecting the lavalier microphone.
- Port USB: Per carregar la bateria interna.
- Clip de cinturó: For attaching the transmitter to clothing or a belt.
Configuració
- Charge the Transmitter: Connect the PXD1 transmitter to a USB power source using the provided USB cable. The Status LED will indicate charging status. Ensure the unit is fully charged before first use.
- Connect the Lavalier Microphone: Plug the lavalier microphone's 3.5mm connector into the Microphone Input jack on the PXD1 transmitter. Secure the microphone to your clothing, approximately 6-8 inches from your mouth, for optimal sound capture.
- Pair with USB Receiver: The PXD1 requires a compatible Samson USB receiver (sold separately) to function.
- Turn on the PXD1 transmitter by pressing and holding the Power Button until the Status LED illuminates.
- Plug the Samson USB receiver into an available USB port on your Mac or Windows computer.
- Follow the pairing instructions provided with your specific Samson USB receiver. Typically, this involves pressing a pairing button on both the transmitter and receiver until a solid connection is indicated by their respective status LEDs.
- Connexió a l'ordinador: Once paired, your computer should recognize the USB receiver as an audio input device. Select it as your input device in your operating system's sound settings and your preferred digital audio software.
Instruccions de funcionament
- Encès/apagat: Press and hold the Power Button for approximately 2 seconds to turn the PXD1 on or off. The Status LED will light up when powered on.
- Monitoritzar els nivells d'àudio: Before recording or live streaming, perform a sound check. Speak into the lavalier microphone at your normal speaking volume and monitor the input levels in your digital audio software. Adjust the input gain on your computer or software as needed to prevent clipping (distortion) and ensure a strong signal.
- Posicionament: Ensure the lavalier microphone is positioned correctly to capture clear audio. Avoid placing it where it might rub against clothing, which can cause unwanted noise.
- Interval: Maintain a clear line of sight between the PXD1 transmitter and the USB receiver for optimal wireless performance. Obstacles can reduce the effective range.
- Durada de la bateria: The Status LED will change color or flash to indicate low battery. Recharge the unit promptly when this occurs.
Manteniment
- Neteja: Use a soft, dry cloth to clean the exterior of the PXD1 transmitter. Do not use liquid cleaners or solvents.
- Emmagatzematge: Quan no l'utilitzeu, guardeu el transmissor en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Cura de la bateria: Per a una durada òptima de la bateria, eviteu descarregar-la completament amb freqüència. Si la guardeu durant períodes prolongats, carregueu-la aproximadament al 50% cada pocs mesos.
- Cura del micròfon: Keep the lavalier microphone clean and free from dust or debris.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense sortida de so |
|
|
| Poor audio quality / Distortion |
|
|
| Transmitter won't turn on |
|
|
Especificacions
- Marca:
- SAMsÓ
- Nom del model:
- PXD1
- Tecnologia de connectivitat:
- USB (via compatible receiver)
- Tipus de connector:
- USB (for charging/receiver connection)
- Patró polar:
- Unidirectional (Lavalier Microphone)
- Pes de l'article:
- 2.4 unces
- Dimensions de l'article (L x A x A):
- 3.6 x 2.2 x 0.9 polzades
- Font d'alimentació:
- Elèctric amb cable (alimentat per USB)
- Usos recomanats:
- Podcasting, Voice Recording
- Dispositius compatibles:
- Personal Computer (Mac/Windows)
- Número de peça del fabricant:
- SWXPD1BP
- UPC:
- 809164218579
Garantia i Suport
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Samson weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.
Samson Official Weblloc: www.samsontech.com