DC2700 1 Channel Wireless RF Transmitter Emitter Remote Controller User Manual

Producte acabatview

The Rollerhouse DC2700 is a single-channel wireless RF transmitter designed to control compatible curtain motors such as the DT52E, KT82TN, and DT360. This remote controller operates on a radio frequency of 433.92 MHz, providing a reliable control range for your motorized window treatments. Its intuitive design features dedicated buttons for Up, Stop, and Down functions, along with a hidden P2 setting button for programming.

Image: The Rollerhouse DC2700 single-channel remote controller, featuring a clean white design with distinct Up, Stop, and Down control lines.

Especificacions

Image: Visual representation of the DC2700 single-channel emitter, highlighting its key specifications including battery type, radio frequency, working temperature, and dimensions.

Configuració

1. Instal·lació de la bateria

The DC2700 remote controller requires one CR2450 Lithium Metal battery. To install or replace the battery:

1. Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
2. Use a small coin or tool to open the battery cover by twisting it counter-clockwise.
3. Introduïu la pila CR2450 amb el costat positiu (+) cap amunt.
4. Replace the battery cover and twist clockwise to secure it.

Imatge: L'esquena view of the DC2700 remote controller, clearly showing the battery compartment and the P2 setting button.

2. Pairing with Motor (Adding New Transmitters)

To add a new DC2700 remote controller to an existing motor system, you will need an already matched transmitter (Remote A) and the new transmitter (Remote B). Ensure you are near the motor for this process.

1. A la original, already matched transmitter (Remote A), premeu P2 button twice. The motor should jog (move slightly) and emit a noise (e.g., "Di...").
2. Within a few seconds, on the new transmitter (Remote B), premeu P2 button once. The motor should jog again and emit a series of beeps (e.g., 7 times "Di").
3. The pairing process is complete. The new remote (Remote B) is now programmed to control the motor.

Image: Step-by-step diagram illustrating the process of adding a new transmitter (Remote B) by using an existing matched transmitter (Remote A) and pressing the P2 button.

Nota important de compatibilitat: This remote is designed to be a replacement for remotes with the exact same shape and model, specifically for DOOYA shade motors. It may not be compatible with other brands or models. Always double-check compatibility before attempting to pair.

Image: "Shopping Notes" graphic emphasizing the importance of verifying compatibility by matching the shape or model of your existing remote and noting that it does not match any other brand.

Instruccions de funcionament

The DC2700 remote controller features three primary control buttons for easy operation of your motorized curtains or blinds:

• UP Button (^): Press to raise the curtain/blind.
• Botó STOP (-): Press to stop the curtain/blind at its current position.
• DOWN Button (v): Press to lower the curtain/blind.

The P2 button, located on the back of the remote, is primarily used for programming and setting functions, not for daily operation.

Image: A person holding the DC2700 remote controller, pointing it towards a window with motorized blinds, demonstrating typical usage.

The remote offers a control range of up to 200 meters outdoors and 35 meters indoors, providing ample flexibility for controlling your shades from various locations within your home or property.

Manteniment

Canvi de bateria

When the remote's range decreases or it becomes unresponsive, it may be time to replace the CR2450 battery. Follow the battery installation steps outlined in the Setup section.

Neteja

To clean the remote controller, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the device. Keep the remote away from direct sunlight and extreme temperatures.

Resolució de problemes

• El comandament a distància no respon:
  • Comproveu si la bateria està instal·lada correctament i té prou càrrega. Substituïu-la si cal.
  • Ensure the remote is within the effective operating range of the motor (35 meters indoors).
  • Verify that there are no significant obstructions (e.g., thick walls, large metal objects) between the remote and the motor that could interfere with the RF signal.
• Unable to pair new remote:
  • Confirm that the new remote is the exact same model (DC2700) and shape as your existing remote. This remote is specifically designed for DOOYA shade motors and may not clone with other brands.
  • Ensure you are following the pairing steps precisely, especially the timing of pressing the P2 button on both the original and new remotes.
  • Make sure the motor is powered on and responsive to the original remote.
• Motor jogs but doesn't respond to commands:
  • This might indicate a partial pairing. Try repeating the pairing process from the beginning.

Garantia i Suport

Rollerhouse products are designed for reliability and performance. If you encounter any issues or have questions regarding your DC2700 remote controller, please contact Rollerhouse customer service. We are committed to providing prompt assistance and support for our products.

For further assistance, you may also refer to the official User Manual (PDF) available for download: Descarrega el manual d'usuari (PDF).