Bemis Aurora Slow Close Toilet Seat Instruction Manual

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Bemis Aurora Round Slow Close Toilet Seat. Designed for comfort and durability, this seat features slow-close technology, easy-clean hinges, and a secure fastening system to prevent shifting. Please read all instructions carefully before beginning installation.

Figure 1: Bemis Aurora Slow Close Toilet Seat

Característiques del producte

• Slow-Close Technology: The lid and seat close slowly and quietly, preventing slamming and pinched fingers.
• Fàcil de netejar i canviar les frontisses: Hinges allow for quick removal of the seat for thorough cleaning and easy replacement.
• Sistema de fixació del seient STA-TITE: Ensures the seat remains firmly attached to the toilet bowl without shifting.
• Para-xocs Super Grip: Additional bumpers prevent the seat from moving on the toilet bowl.
• Ajust de precisió del seient: Offers front-to-back adjustability for an optimal fit on your toilet bowl.
• Construcció duradora: Made from solid resilient plastic with molded-in color, resisting chips, wear, and stains.

Figure 2: Key Features of the Bemis Aurora Toilet Seat

Measuring for Proper Fit

Before installation, ensure you have the correct seat size (Round or Elongated) for your toilet bowl. The Bemis Aurora seat is designed for round bowls.

Com mesurar:

1. Measure the distance between the bolt holes at the back of your toilet bowl. Standard distance is 5.5 inches.
2. Measure from the center of the bolt holes to the front edge of the toilet bowl.
3. Per a Ronda toilet, this measurement should be approximately 16.5 inches (42 cm).
4. Per a un allargat toilet, this measurement should be approximately 18.5 inches (47 cm).

Figure 3: Toilet Seat Size Guide

Instruccions d'instal·lació

The Bemis Aurora toilet seat features the STA-TITE Seat Fastening System for a secure installation.

Eines necessàries:

• 5/8" (16mm) wrench or ratchet with a 5/8" (16mm) socket.

Passos d'instal·lació:

1. Insert the bolts (A) with the arrow shown on the bolt head pointing towards the front of the toilet.
2. Open the hinge caps on the seat.
3. Place the seat onto the toilet bowl, aligning the hinges with the bolts.
4. From underneath the toilet bowl, lightly finger-tighten the nuts (B) onto the bolts.
5. Adjust the seat for a perfect front-to-back fit on the toilet bowl.
6. While holding the seat centered, tighten the nuts (B) with a 5/8" (16mm) wrench or socket until the bottom portion of the nut snaps off. Discard the snapped-off portion. This indicates proper tightening.
7. Close the hinge caps.

Figura 4: Passos fàcils d'instal·lació

Instruccions de funcionament

The primary operation of this toilet seat involves its slow-close feature. To engage the slow-close mechanism, simply push the lid or seat down gently. It will then lower itself slowly and quietly without requiring manual guidance.

Manteniment i Neteja

Regular cleaning will help maintain the glossy finish and extend the life of your toilet seat.

Instruccions de neteja:

• To clean, simply lift the hinge caps and slide the seat forward to remove it from the toilet bowl.
• Feu servir netejadors suaus com ara tovalloletes antibacterianes, sabó per a plats o sabó de mans antibacterià.
• Wipe the seat and hinges thoroughly, then rinse with water and dry with a soft cloth.
• DO NOT USE BLEACH OR HARSH CHEMICALS as these can damage the finish.
• Reattach the seat by aligning it with the bolts and closing the hinge caps.

Figure 5: Cleaning Your Toilet Seat

Resolució de problemes

• Seat Shifts or Wobbles: Ensure the STA-TITE nuts were tightened correctly until the bottom portion snapped off. If the seat still shifts, re-check the tightness of the bolts. The design is intended to prevent loosening.
• Slow-Close Not Functioning: Verify that the seat is properly installed and the hinges are not obstructed. The slow-close mechanism requires the seat to be fully installed on the toilet bowl to function correctly.
• Difficulty Accessing Nuts: Some toilet designs may have enclosed areas making it difficult to access the nuts from underneath. In such cases, specialized tools or alternative mounting hardware might be required, or consult a professional.

Especificacions

Garantia i Suport

The manufacturer warranty covers US and Canada customer purchases for 1 year from the date of purchase. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the official Bemis weblloc.