1. Introducció
Thank you for choosing the Hauck Alpha Bouncer 2-in-1 Newborn Set. This product is designed to provide a comfortable and secure environment for your newborn, functioning as both a standalone baby rocker and an attachment for the Hauck Alpha+ wooden high chair. This manual contains important information for the safe assembly, operation, and maintenance of your bouncer. Please read it thoroughly before use and retain it for future reference.
2. Informació de seguretat
ADVERTIMENT: El no seguir aquestes advertències i instruccions podria provocar lesions greus o la mort.
- No deixeu mai el nen sense vigilància.
- Always use the restraint system. Ensure the harness is correctly fitted and adjusted before each use.
- This bouncer is intended for infants from birth until they can sit up unaided (approximately 6 months or 9 kg/20 lbs).
- No feu servir el gandul si hi ha algun component trencat o que no hi és.
- Do not use the bouncer on an elevated surface (e.g., a table) when used as a standalone rocker. Always place it on the floor.
- When attached to the Hauck Alpha+ high chair, ensure the bouncer is securely locked into place before placing the child in it.
- Do not move the high chair with the bouncer attached while a child is in it.
- No utilitzeu accessoris o peces de recanvi diferents dels aprovats pel fabricant.
- Mantingueu els nens allunyats del producte durant el muntatge i el desmuntatge.
- Aquest producte no està pensat per a períodes prolongats de son.
3. Contingut del paquet
Please check that all components are present and undamaged. If anything is missing or damaged, contact your retailer immediately.
- Alpha Bouncer Seat with 5-point harness and seat minimizer/head support
- Bouncer Base Frame
- Manual d'instruccions
Note: The Hauck Alpha+ wooden high chair is sold separately and is not included in this package.
4. Instruccions de configuració
4.1 Assembling the Bouncer Base Frame
- Unfold the bouncer base frame. Ensure the locking mechanisms click into place securely.
- Place the bouncer base frame on a flat, stable surface.
Image: The Hauck Alpha Bouncer seat attached to its standalone rocking base, ready for use on the floor.
4.2 Attaching the Bouncer Seat to the Bouncer Base Frame
- Align the attachment points on the bouncer seat with the corresponding slots on the bouncer base frame.
- Press down firmly until you hear a click, indicating the seat is securely attached.
- Verify the seat is stable and cannot be easily dislodged from the base.
Imatge: Vista de dalt a baix view of the bouncer seat, showing the plush bear insert and the 5-point harness system.
4.3 Attaching the Bouncer Seat to the Hauck Alpha+ High Chair (Optional)
This bouncer seat is designed to be compatible with the Hauck Alpha+ wooden high chair (sold separately).
- Ensure the high chair is assembled according to its own instruction manual and is stable.
- Remove the bouncer seat from its rocking base by pressing the release buttons on the sides and lifting it off.
- Align the bouncer seat's attachment points with the designated slots on the Hauck Alpha+ high chair's frame.
- Push the bouncer seat down firmly until it clicks securely into place on the high chair.
- Before placing your child in the bouncer, gently pull up on the seat to confirm it is firmly attached to the high chair.
Image: The bouncer seat securely attached to the Hauck Alpha+ wooden high chair, allowing the baby to be at table height.
Image: This image illustrates the versatility of the bouncer, showing it both attached to the Alpha+ high chair and on its separate rocking base.
5. Instruccions de funcionament
5.1 Placing Your Child in the Bouncer
- Gently place your child into the bouncer seat.
- Ensure the child's back is flat against the seat and their head is supported by the integrated head support/seat minimizer.
5.2 Securing the 5-Point Harness
- Passeu les corretges de les espatlles per sobre de les espatlles del vostre fill i les corretges de la cintura al voltant dels malucs.
- Connect the two buckle halves into the central buckle until they click.
- Adjust the straps to ensure a snug fit. The harness should be tight enough so that you can only fit one finger between the strap and your child's body.
- To release the harness, press the button on the central buckle.
Imatge: Una imatge detallada view of the 5-point safety harness and the soft, supportive bear-shaped seat minimizer.
5.3 Using the Rocking Function (Standalone Mode)
When the bouncer seat is attached to its standalone base, gentle movements will cause it to rock, providing a soothing motion for your child.
- Ensure the bouncer is placed on a flat, level floor surface.
- Supervise your child during rocking.
Imatge: Side profile of the bouncer on its rocking base, highlighting the design that allows for gentle bouncing motions.
6. Manteniment i cura
6.1 Cleaning the Fabric Cover
- The fabric cover can be removed for cleaning. Refer to the care label attached to the fabric for specific washing instructions.
- Typically, machine wash on a gentle cycle with cold water and mild detergent. Do not bleach.
- Assecar només a l'aire. No assecar a l'assecadora.
- Ensure the fabric is completely dry before reattaching it to the bouncer frame.
Image: A close-up of the bouncer's soft fabric seat, showing the heart pattern and the harness straps.
6.2 Neteja del marc
- Wipe the plastic and metal parts of the frame with a damp drap i sabó suau.
- Assecar completament abans de guardar-lo o utilitzar-lo el següent cop.
- No utilitzeu netejadors abrasius ni dissolvents.
6.3 Emmagatzematge
- Store the bouncer in a clean, dry place away from direct sunlight and extreme temperatures.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Bouncer feels unstable on its base. | Base frame not fully unfolded or locked. | Ensure all locking mechanisms on the base frame are engaged. Place on a flat, level surface. |
| Bouncer seat not attaching securely to high chair. | Alineació incorrecta o obstrucció. | Re-align the attachment points and press firmly until a click is heard. Check for any debris in the slots. |
| Harness is too loose or too tight. | Incorrect strap adjustment. | Adjust the straps using the sliders until a snug fit is achieved (one finger space). |
| Fabric cover is difficult to remove/reattach. | Improper technique. | Carefully follow the instructions for removal and reattachment, ensuring all elastic loops or fasteners are correctly positioned. |
8. Especificacions
- Número de model: 661898
- Dimensions del producte: 26"D x 19.3"W x 17.7"H (approximate, when on rocking base)
- Pes de l'article: 5 lliures
- Pes màxim recomanat: 20 lbs (9 kg) or until child can sit up unaided
- Tipus de material: Fabric, Metal, Plastic (Beech Wood for compatible high chair, not included)
- Color: Hearts Beige
- Característiques: 2-in-1 bouncer (rocker and high chair attachment), 5-point harness, seat minimizer/head support
- Bateries necessàries: No
- Portàtil: Sí
Image: A diagram illustrating the approximate dimensions of the bouncer when attached to the Hauck Alpha+ high chair.
9. Garantia i Suport
For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Hauck weblloc.
If you require technical support, replacement parts, or have any questions not covered in this manual, please contact Hauck customer service directly. Contact information can typically be found on the product packaging or the official Hauck weblloc.
Fabricant: Hauck