1. Introducció
This manual provides detailed instructions for the safe installation, operation, and maintenance of your WAC Lighting LED 7030 Oculux Track Head. Please read all instructions carefully before installation and retain this manual for future reference.
Image 1.1: WAC Lighting LED 7030 Oculux Track Head in an office environment.
2. Informació de seguretat
- ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
- Aquest producte s'ha d'instal·lar d'acord amb el codi d'instal·lació aplicable per una persona familiaritzada amb la construcció i el funcionament del producte i els perills que comporta.
- Do not install this fixture on a track system that is not compatible. Refer to the track compatibility section.
- Assegureu-vos que totes les connexions estiguin segures i aïllades correctament.
- No modifiqueu l'aparell. Qualsevol modificació pot anul·lar la garantia i crear riscos per a la seguretat.
- Apte només per a ús en interiors.
3. Producte acabatview
The WAC Lighting LED 7030 Oculux Track Head is a high-efficiency LED lighting fixture designed for track systems. It features a die-cast aluminum construction with a baffled front cover for glare control and offers adjustable beam spreads.
Característiques principals:
- Compatible with standard H, L, or J 120V track systems.
- High output: Up to 2025 Lumens, comparable to a 100W PAR38.
- Adjustable beam angle with included films: 50° (pre-installed) and interchangeable 30°.
- 350° horizontal and 90° vertical aiming for precise light direction.
Image 3.1: WAC Lighting LED 7030 Oculux Track Head.
4. Configuració i instal·lació
The Oculux Track Head requires assembly and installation onto a compatible track system. Ensure power is disconnected before proceeding.
4.1 Track Compatibility
The first character of the model number indicates the compatible track type. This model (L-7030-930-WT) is designed for L Track systems. Verify your track system type before installation.
Image 4.1: Track Fixture Configurations and Compatibility.
4.2 Passos d'instal·lació
- Desconnecteu l'alimentació: Turn off power to the track system at the circuit breaker.
- Preparació de l'aparell: Ensure the track head is fully assembled. The fixture includes mounting hardware and installation instructions specific to the track head. Refer to the detailed instructions provided in the product packaging for specific steps.
- Attach to Track: Align the track head's connector with the track slot. Insert the connector into the track and twist to secure it in place. Ensure a firm electrical connection.
- Restaura l'alimentació: Once the fixture is securely installed, restore power to the track system.
5. Instruccions de funcionament
The WAC Lighting LED 7030 Oculux Track Head operates as part of your track lighting system. Once installed and power is supplied to the track, the fixture will illuminate. Control of the light (on/off) is typically managed by the wall switch connected to your track system.
5.1 Aiming the Fixture
The track head offers 350° horizontal rotation and 90° vertical tilt. Gently adjust the fixture body to direct the light beam to your desired area. Do not force the movement beyond its designed range.
5.2 Beam Adjustment
The Oculux 7030 comes with a 50° beam film pre-installed and an interchangeable 30° film. To change the beam angle:
- Desconnecteu l'alimentació: Apagueu l'alimentació de l'aparell.
- Remove Baffled Front Cover: Carefully unscrew or detach the baffled front cover.
- Access Films: The beam film is located within the optic holder. The clear glass lens is also present.
- Change Film: Remove the existing 50° film (FILM-20-F) and replace it with the 30° narrow flood film (FILM-20-N), ensuring the gloss side faces out. For a spot beam, remove the film entirely.
- Torneu a muntar: Reattach the clear glass lens and the baffled front cover securely.
- Restaura l'alimentació: Torneu a encendre l'alimentació.
Image 5.1: Beam Adjustment Components (Fig. 4).
6. Manteniment
The WAC Lighting LED 7030 Oculux Track Head requires minimal maintenance.
- Neteja: Ensure power is off before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- Font LED: The LED light source is non-removable and designed for long-term operation. Do not attempt to replace the LED module.
7. Solució De Problemes
If your track head is not functioning correctly, refer to the following common issues and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El llum no s'il·lumina. | No hi ha electricitat a la pista. | Comproveu l'interruptor i l'interruptor de paret. Assegureu-vos que hi hagi corrent. |
| Fixture not properly connected to the track. | Ensure the track head is securely inserted and twisted into the track. | |
| La sortida de llum és tènue o parpelleja. | Connexió fluixa. | Disconnect power, then re-seat the fixture firmly into the track. |
| Regulador d'intensitat incompatible (si escau). | Ensure a compatible LED dimmer is used. Consult a qualified electrician. | |
| L'aparell està calent al tacte. | Normal operation for high-output LEDs. | Avoid prolonged direct contact. Ensure adequate ventilation around the fixture. |
If troubleshooting steps do not resolve the issue, contact a qualified electrician or WAC Lighting customer support.
8. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Il·luminació WAC |
| Número de model | L-7030-930-WT |
| Material | Alumini |
| Color | Blanc |
| Font d'alimentació | AC |
| Voltage | 120 Volts |
| Font de llum | LED |
| Wattage | 30 watts |
| Brillantor | 2025 lúmens (màxim) |
| Temperatura de color | 3000 Kelvin |
| Tipus de muntatge | Wall Mount (Track System) |
| Apuntant | 350° horitzontal, 90° vertical |
| Beam Angle Options | 50° (pre-installed), 30° (interchangeable) |
| Components inclosos | Fixture, mounting hardware, installation instructions |
| UPC | 790576670393 |
9. Garantia
This WAC Lighting product is covered by a 5-year limited manufacturer warranty. Please refer to the warranty documentation included with your product or visit the official WAC Lighting weblloc per obtenir els termes i condicions complets.
10. Suport
For technical assistance, replacement parts, or further inquiries, please contact WAC Lighting customer support. Refer to the contact information provided in your product packaging or visit the official WAC Lighting weblloc.