1. Introducció
Gràcies per la compraasing the Nedis 4-Way Speaker Control Box. This device allows you to connect a single stereo amplifier to up to four pairs of stereo speakers, providing flexible control over your audio setup. You can select individual speaker pairs or play all connected speakers simultaneously. Please read this manual carefully before installation and use to ensure proper operation and to prevent damage.
Instruccions de seguretat
- Ensure all connections are secure and correct before powering on your ampmés viu.
- Do not exceed the maximum power handling capacity of 200W per channel.
- Maintain proper speaker impedance (4-16 Ohm) to prevent damage to your ampmés viu.
- Manteniu el dispositiu allunyat de l'aigua, la humitat i les temperatures extremes.
- No obriu la c.asing; no hi ha peces a l'interior que l'usuari pugui reparar.
2. Contingut del paquet
- Nedis 4-Way Speaker Control Box (ASWI2614BK)
- Manual d'usuari
Note: Speaker cables are not included and must be purchased separately.
3. Producte acabatview
The Nedis 4-Way Speaker Control Box features a durable aluminum design and allows for easy management of multiple speaker pairs. It is equipped with four individual toggle switches for speaker selection.

Figura 3.1: superior view of the speaker control box, highlighting the speaker selection switches.
Característiques principals:
- Switch between four pairs of speakers or play all simultaneously.
- Elegant metal finish for durability and aesthetic appeal.
- Four separate toggle switches for independent control of each speaker pair.
- Supports maximum cable length of 50 meters.
- Manual control method for straightforward operation.
4. Configuració i connexions
Before making any connections, ensure your amplifier and all audio equipment are turned off and unplugged from the power outlet.

Figure 4.1: Rear panel connections for amplifier input and speaker outputs.
- Connecta't Ampmés viu: Connect the speaker output terminals of your stereo ampmés viu al AMPENTRADA DE LIFICADOR screw terminals on the rear of the control box. Ensure correct polarity (+ to + and - to -) for both Left and Right channels.
- Connectar els altaveus: Connect each pair of stereo speakers to the corresponding SORTIDA ALTAVOUS 1, SORTIDA ALTAVOUS 2, SORTIDA ALTAVOUS 3, i SORTIDA ALTAVOUS 4 screw terminals. Again, observe correct polarity for Left and Right channels for each speaker pair.
- Verifica les connexions: Double-check all connections to ensure they are secure and correctly wired. Loose connections can cause poor sound quality or damage.
- Encès: Once all connections are verified, you may plug in and power on your ampmés viu.
5. Instruccions de funcionament
The Nedis 4-Way Speaker Control Box is operated manually using the four toggle switches on the front panel.

Figure 5.1: Front panel with four speaker selection switches.
- Each switch corresponds to a specific speaker output (Speaker Output 1, 2, 3, or 4).
- To activate a speaker pair, flip its corresponding switch to the ON posició.
- To deactivate a speaker pair, flip its corresponding switch to the OFF posició.
- You can select any combination of speaker pairs, from a single pair to all four pairs simultaneously.
- Assegureu-vos el vostre amplifier can handle the combined impedance when multiple speaker pairs are active. Refer to your amplifier's manual for details.
6. Manteniment
The Nedis 4-Way Speaker Control Box requires minimal maintenance.
- Neteja: Use a soft, dry cloth to wipe the exterior of the unit. Do not use abrasive cleaners, solvents, or chemical sprays.
- Emmagatzematge: If storing the unit for an extended period, disconnect all cables and store it in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspecció: Comproveu periòdicament totes les connexions dels cables per comprovar si estan ben ajustades i si hi ha signes de desgast.
7. Solució De Problemes
If you encounter issues with your speaker control box, please refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so dels altaveus. |
|
|
| Distorted or low sound. |
|
|
| Only one channel (Left/Right) plays. |
|
|
8. Especificacions
| Número de model | ASWI2614BK |
| Marca | NEDIS |
| Material | Alumini |
| Color | Negre |
| Impedància de l'altaveu | 4-16 Ohm |
| Max Load per Channel | 200 W |
| Number of Speaker Outputs | 4 (stereo pairs) |
| Mètode de control | Manual (Toggle Switches) |
| Tecnologia de connectivitat | Wired (Screw Terminals) |
| Dimensions (L x P x A) | Aprox. 20 cm x 10 cm x 4 cm |
| Pes | 550 grams |
| País d'origen | Xina |
9. Garantia i Suport
This Nedis product comes with a Garantia limitada. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact your retailer.
Atenció al client
If you have any questions, require technical assistance, or need to report a problem, please contact Nedis customer support through their official website or your local distributor. Please have your model number (ASWI2614BK) and purchase information ready when contacting support.