FLYBOTIC RC 84842 SPY RACER Drone User Manual

1. Producte acabatview

The Silverlit FLYBOTIC RC 84842 Spy Racer is a remote-controlled drone designed for both indoor and outdoor use. It features a built-in 0.3 MP camera for capturing photos and videos, 2.4 GHz technology for stable control, and various flight modes including 360° flips and headless mode for enhanced maneuverability.

Image: The FLYBOTIC RC 84842 Spy Racer drone in action, demonstrating its size and the remote control.

Informació de seguretat

WARNING: For use under direct adult supervision. Not suitable for children under 14 years due to advanced operation requirements and small parts. Keep fingers, hair, and loose clothing away from rotating propellers.

Always operate the drone in open spaces, away from people, animals, and obstacles. Do not fly near power lines, trees, or water. Ensure the drone is fully charged and the remote control has fresh batteries before each flight.

2. Contingut del paquet

Before beginning, please ensure all items listed below are present in your package:

• FLYBOTIC RC 84842 Spy Racer Drone
• Control remot
• USB Charging Cable (for drone battery)
• Spare Propellers (if included)
• Manual d'instruccions (aquest document)

Image: The retail packaging of the Spy Racer drone, illustrating the main components.

3. Guia de configuració

3.1. Instal·lació de la bateria

Drone Bateria: The drone requires 1 x 3.7V LI-ION battery (not included). Locate the battery compartment on the underside of the drone. Insert the battery, ensuring correct polarity, and close the compartment securely.

Bateries de control remot: The remote control requires 4 x AA batteries (not included). Open the battery compartment on the back of the remote control. Insert the batteries, observing the correct polarity (+/-), and replace the cover.

Image: The drone and its remote control, highlighting the main units.

3.2. Càrrega de la bateria del dron

1. Connect the drone's battery to the provided USB charging cable.
2. Plug the USB cable into a USB power source (e.g., computer USB port, USB wall adapter).
3. The charging indicator light on the USB cable will show the charging status (refer to cable instructions for specific light behavior).
4. La càrrega sol trigar aproximadament entre 60 i 90 minuts. No la carregueu massa.

3.3. Emparellar el dron i el comandament a distància

1. Col·loqueu el drone sobre una superfície plana i plana.
2. Engegueu l'interruptor d'encesa del dron. Els llums del dron parpellejaran.
3. Engegueu l'interruptor d'alimentació del comandament a distància.
4. Push the left joystick (throttle) all the way up, then all the way down.
5. The drone's lights will stop flashing and become solid, indicating successful pairing.

4. Instruccions de funcionament

4.1. Controls bàsics de vol

Imatge: Detallada view of the remote control for the Spy Racer drone.

• Joystick esquerre (accelerador/guinyada):
  • Amunt/Avall: Controla l'altitud (ascens/descens).
  • Left/Right: Controls yaw (rotates the drone left/right).
• Joystick dret (Pitch/Roll):
  • Up/Down: Controls pitch (moves drone forward/backward).
  • Left/Right: Controls roll (moves drone left/right sideways).
• Botons de retallar: Used to fine-tune the drone's stability if it drifts in any direction. Adjust until the drone hovers steadily.

4.2. Mode sense cap

Premeu el botó