VIVOHOME 3-in-1 Entryway Hall Tree (Model VH428) Instruction Manual

1. Informació de seguretat

Si us plau, llegiu i enteneu totes les instruccions abans del muntatge i l'ús. Conserveu aquest manual per a futures consultes.

• Capacitat de pes: The bench is designed to support a maximum weight of 220 pounds (100 kg). Do not exceed this limit.
• Kit antibolcada: An anti-tip kit is included to secure the unit to a wall. It is highly recommended to install this kit to prevent accidental tipping, especially in households with children or pets.
• Muntatge: Assemble the unit on a soft, clean surface to prevent scratches. Ensure all connections are tight before use.
• Col·locació: Place the unit on a level surface. Adjustable feet are provided to help stabilize the unit on uneven floors.
• Manteniment: Regularly check all bolts and connections to ensure they remain secure.

2. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar el muntatge. Si falta alguna peça o hi ha alguna peça danyada, poseu-vos en contacte amb el servei d'atenció al client.

Note: The exact number and type of screws may vary slightly. Refer to the assembly diagram for specific hardware identification.

3. Instruccions de muntatge

Follow these steps carefully for proper assembly. It is recommended to have two people for easier assembly.

Pas 1: Prepareu els components

Unpack all parts and lay them out on a clean, soft surface. Identify each component using the provided parts list and diagrams.

Image: All components and dimensions of the VIVOHOME Hall Tree.

Step 2: Attach Hooks to Wood Panels

Secure the fixed hooks to the designated wood back panels using the provided screws. Ensure they are firmly attached.

Image: Detail of fixed hooks on a wood panel and the bench's weight capacity.

Pas 3: Muntar el marc base

Connect the lower metal frame components, including the side supports and the shoe rack frames. Do not fully tighten screws until the entire unit is assembled.

Step 4: Install Wood Bench and Back Panels

Attach the wood bench top to the base frame. Then, secure the wood back panels with the fixed hooks to the vertical metal bars.

Step 5: Attach Top Rail and Movable Hooks

Connect the top metal rail to the vertical supports. Slide the movable hooks onto the lower wood back panel as desired. These hooks can be repositioned for different items or heights.

Image: Movable hooks and adjustable feet for stability.

Step 6: Final Tightening and Stabilization

Once all components are in place, gradually tighten all screws. Place the unit in its desired location and adjust the leveling feet to ensure stability on uneven floors. Install the anti-tip kit by securing the unit to the wall.

Vídeo de muntatge

For a visual guide on assembly, please refer to the official VIVOHOME assembly video:

4. Instruccions de funcionament

The VIVOHOME 3-in-1 Entryway Hall Tree is designed for organizing coats, shoes, and accessories in your entryway or other living spaces.

Using the Coat Rack

• Hang coats, jackets, scarves, and hats on the fixed hooks.
• Utilize the movable hooks for items requiring adjustable height, such as children's coats or umbrellas.
• The top rail can be used for hangers to keep garments wrinkle-free.

Using the Shoe Rack

• Place shoes on the two lower shelves. Each shelf can accommodate approximately 3 pairs of shoes, for a total of 6 pairs.
• Ensure shoes are placed neatly to maximize space and maintain stability.

Using the Bench

• The sturdy bench provides a convenient seating area for putting on or taking off shoes.
• Do not exceed the maximum weight capacity of 220 pounds (100 kg) on the bench.
• The bench surface can also be used for temporary storage of bags or decorative items.

Image: VIVOHOME Hall Tree in use, demonstrating its organizational capabilities.

5. Manteniment

Proper care and maintenance will extend the life of your VIVOHOME Hall Tree.

• Neteja: Netegeu les superfícies amb un suau, damp drap. Eviteu utilitzar productes químics agressius o netejadors abrasius, ja que poden danyar l'acabat.
• Pols: Regularly dust the metal and wood surfaces to prevent buildup.
• Comprovació de maquinari: Inspeccioneu periòdicament tots els cargols i perns per assegurar-vos que estiguin ben ajustats. Torneu a estrènyer-los si cal per mantenir l'estabilitat.
• Vessaments: Netegeu els vessaments immediatament per evitar taques o danys a la fusta.
• Medi ambient: Avoid placing the unit in direct sunlight or near heat sources, which can cause the wood to warp or fade. Maintain a stable humidity level to prevent material degradation.

6. Solució De Problemes

If you encounter any issues with your VIVOHOME Hall Tree, refer to the following common solutions:

• La unitat és inestable:
  • Assegureu-vos que tots els cargols de muntatge estiguin completament apretats.
  • Adjust the leveling feet on the bottom of the unit to compensate for uneven flooring.
  • Verifiqueu que el kit antivuelco estigui correctament instal·lat i fixat a la paret.
• Hooks are Loose:
  • For fixed hooks, tighten the screws securing them to the wood panels.
  • Movable hooks are designed to slide; ensure they are properly seated on the panel.
• Dificultat de muntatge:
  • Review acuradament les instruccions de muntatge i els esquemes.
  • Assegureu-vos que feu servir el maquinari correcte per a cada pas.
  • Do not fully tighten screws until all components are loosely fitted together, then tighten gradually.

If problems persist, please contact VIVOHOME customer support for assistance.

7. Especificacions

8. Garantia i Suport

VIVOHOME products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official VIVOHOME weblloc.

If you require assistance with assembly, have questions about product functionality, or need to report missing/damaged parts, please contact VIVOHOME customer support:

• Weblloc: www.vivohome.com
• Correu electrònic: Refer to your purchase documentation for specific contact email.
• Telèfon: Refer to your purchase documentation for specific contact phone number.

Please have your model number (VH428) and purchase date available when contacting support.