1. Producte acabatview
The JONATHAN Y Alaro Table Lamp (Model JYL6501A) is designed to provide illumination and enhance your home decor. It features a classic shape with a base hand-woven from natural dried banana-leaf fibers on a sturdy metal frame. The lamp is topped with a modern drum shade made from flax-toned linen. This lamp is suitable for various interior styles including Coastal, Rustic, and Traditional settings. The overall dimensions are approximately 16 inches (Depth) x 16 inches (Width) x 24.5 inches (Height).
2. Què s'inclou
En desembalar, assegureu-vos que hi hagi tots els components següents:
- 1 x Alaro Table Lamp Base
- 1 x Linen Drum Shade
- 1 x LED Bulb (E26 base, A19 shape)
- 1 x Harp and Finial
3. Muntatge i muntatge
The JONATHAN Y Alaro Table Lamp està dissenyat per a un muntatge fàcil. Segueix aquests passos per configurar el teu lamp:
- Desempaquetar components: Traieu amb cura totes les peces de l'embalatge. Col·loqueu-les sobre una superfície neta i plana.
- Attach Harp: Secure the harp (the U-shaped wire frame) to the saddle on the lamp base.
- Col·locar ombra: Position the linen drum shade onto the harp.
- Final segur: Screw the finial (decorative top piece) onto the threaded rod at the top of the harp to hold the shade in place.
- Instal·leu la bombeta: Carefully screw the included LED bulb into the lamp socket (E26 base). Do not overtighten.
- Connectar l'alimentació: Connecteu la lamp's cord into a standard 120-volt electrical outlet.
For a visual guide, refer to the 'Visual Guide' section below or the Manual d'instal·lació (PDF).
Figure 3.1: Illustrative diagram highlighting key components and features for assembly.
4. Instruccions de funcionament
To operate your JONATHAN Y Alaro Table Lamp:
- Encès/apagat: El lamp is equipped with a rotary switch located on the socket. Turn the switch clockwise to turn the lamp ON, and counter-clockwise to turn it OFF.
- Tipus de bombeta: El lamp uses an E26 base LED bulb, which is included. For replacement, use an E26 base bulb with a maximum wattage de 100 watts.
Figure 4.1: Icons representing key features including the rotary switch and LED bulb.
5. Cura i Manteniment
Proper care will ensure the longevity and appearance of your lamp:
- Neteja de la base: Dust the woven water hyacinth base regularly with a soft, dry cloth. For deeper cleaning, a slightly damp cloth can be used, but ensure the base is dried immediately to prevent moisture damage. Avoid abrasive cleaners.
- Neteja de l'ombra: Dust the linen shade with a soft brush or a lint roller. Spot clean any marks with a mild fabric cleaner, testing on an inconspicuous area first.
- Substitució de bombetes: Desendolleu sempre la lamp before replacing the bulb. Allow the old bulb to cool completely before removing. Screw in the new E26 base LED bulb gently.
- Atenció general: Eviteu col·locar la lamp in direct sunlight for extended periods to prevent fading of the natural materials. Keep away from excessive moisture.
6. Solució De Problemes
Si la teva lamp is not functioning as expected, consider the following common issues:
- Lamp No s'encén:
- Assegureu-vos que el cable d'alimentació estigui ben connectat a una presa de corrent que funcioni.
- Check if the light bulb is screwed in correctly and is not loose.
- Verify that the bulb is not burnt out. Replace if necessary.
- Confirm the rotary switch is fully turned to the 'ON' position.
- Llum parpellejant:
- Premeu la bombeta a l'endoll.
- Assegureu-vos que la bombeta sigui compatible amb la lampespecificacions elèctriques de .
If issues persist after checking these points, please contact customer support.
7. Especificacions del producte
| Característica | Especificació |
|---|---|
| Número de model | JYL6501A |
| Marca | JONATHAN Y |
| Dimensions del producte | 16 "P x 16" W x 24.5" H |
| Pes de l'article | 5.1 lliures |
| Material base | Metal, Woven Water Hyacinth |
| Material d'ombra | Lli |
| Tipus de font de llum | LED |
| Base del bulb | E26 |
| Wattage | 100 watts (màx.) |
| Voltage | 120 volts |
| Tipus de canvi | Interruptor rotatiu |
| Ús interior/exterior | Interior |
| Certificacions | ETL Listed, UL Standards |
8. Garantia i Suport
Garantia del fabricant: This product comes with a 30-day manufacturer warranty covering defects only. Normal wear and tear is not warranted. Visible damages not noted upon delivery will be determined to be customer damage and will not be warranted. All products are inspected upon arrival, and worn, dirty, or stained merchandise will not be accepted for warranty claims.
For warranty information or customer support, please call the internet customer service center or visit the official JONATHAN Y Store.
9. Guia visual
