HUBBELL WIRING DEVICE-KELLEMS HBL9368 3 Wire Industrial Angle Straight Blade Instruction Manual

Introducció

This manual provides essential information for the safe and effective installation, operation, and maintenance of the Hubbell HBL9368 3 Wire Industrial Angle Straight Blade. Please read this manual thoroughly before installation or use and retain it for future reference.

Informació de seguretat

ADVERTÈNCIA: Risc de descàrrega elèctrica o incendi.

• La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics nacionals i locals.
• Desconnecteu sempre l'alimentació a l'interruptor automàtic o a la caixa de fusibles abans d'instal·lar o fer el manteniment d'aquest dispositiu.
• No utilitzeu aquest dispositiu si sembla malmès.
• Assegureu-vos que totes les connexions estiguin segures i aïllades correctament.
• This device is rated for 250 Volts and 50 Amps. Do not exceed these ratings.

Producte acabatview

Image: Hubbell HBL9368 3 Wire Industrial Angle Straight Blade. This image shows the front view of the industrial plug, featuring three brass-colored straight blades arranged in an angled configuration on a white faceplate, secured by four screws. The main body of the plug is black, indicating a robust construction.

The Hubbell HBL9368 is a durable 3-wire industrial angle straight blade plug designed for demanding electrical applications. It features a robust nylon construction and is rated for 250V, 50A. This device is compatible with various industrial equipment requiring a secure and reliable power connection.

Configuració i instal·lació

Seguiu aquests passos per a una instal·lació correcta:

1. Desconnexió d'alimentació: Before beginning any work, ensure that the power supply to the circuit is completely disconnected at the main service panel. Verify with a voltage provador.
2. Preparació del cable: Strip approximately 3/4 inch (19mm) of insulation from the ends of the three conductors (Line 1, Line 2, Ground). Ensure the wire gauge is appropriate for 50 Amps.
3. Open Device: Disassemble the plug by removing the retaining screws to access the wiring terminals.
4. Connecteu els cables:
   • Connect the ground wire (typically green or bare copper) to the green grounding screw terminal.
   • Connect the Line 1 wire to one of the brass-colored terminals.
   • Connect the Line 2 wire to the other brass-colored terminal.
   Ensure all wire strands are securely under the terminal screws and tightened to the manufacturer's specified torque.
5. Muntar el dispositiu: Carefully reassemble the plug, ensuring no wires are pinched and the housing is securely fastened.
6. Prova: Once fully assembled, restore power and test the connection with a suitable load.

Refer to local electrical codes for specific wiring color conventions and installation requirements.

Instruccions de funcionament

The Hubbell HBL9368 is designed for straightforward operation:

• Connexió: Insert the plug firmly into a compatible 3-wire, 50A, 250V industrial receptacle.
• Desconnexió: To disconnect, grasp the body of the plug and pull it straight out from the receptacle. Do not pull by the cord.
• Ajust segur: Ensure the plug is fully seated in the receptacle to prevent arcing or loose connections.

Manteniment

Regular inspection and maintenance ensure optimal performance and safety:

• Inspecció visual: Periodically inspect the plug for any signs of damage, such as cracks, discoloration, or loose components.
• Estanquitat del terminal: With power disconnected, occasionally check the tightness of the terminal screws to ensure secure wire connections.
• Neteja: Clean the exterior of the plug with a dry, lint-free cloth. Do not use liquid cleaners or solvents.
• Substitució: If any damage is observed, replace the plug immediately.

Resolució de problemes

Si teniu problemes, tingueu en compte el següent:

Especificacions

Garantia i Suport

For warranty information and technical support, please contact Hubbell customer service or visit their official weblloc. Conserveu el rebut de compra per a reclamacions de garantia.

Hubbell Official Weblloc: www.hubbell.com