Producte acabatview
The Mount-It! Advanced Tilt TV Wall Mount (Model MI-382) is designed to securely hold flat-panel televisions ranging from 37 to 80 inches, with a maximum weight capacity of 154 pounds. This mount offers enhanced flexibility with tool-less tilt adjustment, swivel capabilities, and an extendable design for optimal viewing angles and easy cable access. It is compatible with VESA mounting patterns up to 600x400mm.
Informació de seguretat
ADVERTIMENT: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer service.
- Capacitat de pes: No supereu la capacitat màxima de pes de 70 kg. Aquest suport està pensat per utilitzar-se només amb els pesos màxims indicats. L'ús amb productes més pesants que els pesos màxims indicats pot provocar inestabilitat i causar possibles lesions.
- Mida de la pantalla: Compatible with TVs from 37 to 80 inches.
- Compatibilitat VESA: Ensure your TV's VESA pattern (mounting hole spacing) is within the range of 200x200mm to 600x400mm.
- Tipus de paret: This mount is designed for installation on solid concrete walls, brick walls, or wood stud walls. Do not install on drywall alone.
- Instal·lació professional: If unsure about the installation process, consult a qualified professional.
Llista de peces
Verify all components are present before beginning installation. If any parts are missing or damaged, contact Mount-It! customer service.
- Muntatge de la placa de paret
- Suports de TV (2)
- Maquinari de muntatge (diversos cargols, volanderes, separadors per a TV i paret)
- Nivell de bombolla
- Quick-Release Cords
- Allen Wrench for adjustments
Configuració i instal·lació
Follow these steps carefully for a secure installation. It is recommended to have two people for TV mounting.
- Prepara la televisió:
Attach the TV brackets to the back of your television using the appropriate screws, washers, and spacers from the provided hardware kit. Ensure the brackets are securely fastened and aligned with your TV's VESA mounting holes. - Localitza la posició de muntatge:
Determine the desired height and center position for your TV. Use a stud finder to locate wood studs if mounting on a wood stud wall. Mark the drilling locations for the wall plate. - Instal·leu la placa de paret:
Drill pilot holes at the marked locations. Secure the wall plate assembly to the wall using the provided lag bolts and washers. Ensure the wall plate is level using the included bubble level. The open design of the wall plate allows for mounting over cable inlets and power outlets.
Figure 1: Key features of the Mount-It! Advanced Tilt TV Wall Mount, including the built-in bubble level and open wall plate design.
- Penja el televisor:
Carefully lift the TV with the attached brackets and hook them onto the wall plate. The spring lock mechanism will secure the TV in place. Pull the quick-release cords to ensure the TV is properly seated and locked.Video 1: Official Mount-It! video demonstrating the installation and features of the Advanced Tilt TV Wall Mount.
- Assegura el televisor:
For added security, a padlock (not included) can be used with the padlock-compatible feature on the TV brackets to prevent accidental removal or theft.
Instruccions de funcionament
This mount offers various adjustments for optimal viewing i comoditat.
- Extension and Swivel: The mount extends up to 5.3 inches from the wall and allows for a 5-degree swivel both left and right. Gently pull the TV forward to extend it, then adjust the swivel angle as needed.
Figure 2: The mount extends and swivels to provide easy access to cables and ports.
- Ajust d'inclinació: The mount features a tool-less tilt adjustment, allowing for 5 degrees upward tilt and 12 degrees downward tilt. Use the tilt adjustment knob on the TV brackets to achieve your desired viewangle d'inclinació i reduir l'enlluernament.
Figure 3: The mount allows for easy tilt adjustment to optimize viewing.
- Micro-Level Adjustment: After installation, use the micro-level adjustment feature to ensure your screen is perfectly straight. This can be done with an Allen wrench (included).
Figure 4: Adjusting the micro-level to ensure the TV is perfectly horizontal.
- Quick-Release Cords: To remove the TV from the wall mount, pull down on the quick-release cords located at the bottom of the TV brackets. This disengages the locking mechanism, allowing the TV to be lifted off the wall plate. After installation, tuck these cords in for a clean appearance.
Manteniment
Un manteniment regular garanteix la longevitat i el funcionament segur del suport del televisor.
- Neteja: Netegeu el suport amb un drap suau i sec. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
- Comproveu les connexions: Periodically check all screws and bolts to ensure they are tight and secure. Over time, vibrations or movement may cause fasteners to loosen.
- Lubricació: If movement becomes stiff, a small amount of silicone-based lubricant can be applied to the moving joints.
Resolució de problemes
Si teniu problemes durant o després de la instal·lació, consulteu els problemes i solucions habituals següents.
- El televisor no està anivellat: Use the micro-level adjustment feature on the TV brackets to fine-tune the horizontal alignment. Ensure the wall plate was installed level initially.
- Dificultat per ajustar la inclinació/gir: Check if the tilt adjustment knob is loose enough to allow movement. Ensure no cables are obstructing the movement of the mount.
- TV feels wobbly: Re-check all wall plate and TV bracket connections to ensure they are securely tightened. Verify that the wall studs or concrete are capable of supporting the TV's weight.
- Cables are difficult to access: Utilize the extension feature of the mount by gently pulling the TV away from the wall. This provides more space to connect or disconnect cables.
Especificacions
| Tipus de muntatge | Muntatge de paret |
| Tipus de moviment | Inclinar, girar, estendre |
| Marca | Mount-It! |
| Material | Acer d'aliatge |
| Color | Negre |
| Dispositius compatibles | Televisió |
| Minimum Supported Screen Size | 37 polzades |
| Maximum Supported Screen Size | 80 polzades |
| Capacitat màxima de pes | 154 lliures (70 kg) |
| Compatibilitat VESA | 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 600x200mm, 600x300mm, 600x400mm |
| Extensió des de la paret | Fins a 5.3 polzades |
| Angle d'inclinació | 5 graus amunt, 12 graus avall |
| Angle de gir | 5 degrees left, 5 degrees right |
Garantia i Suport
The Mount-It! Advanced Tilt TV Wall Mount is backed by a LIFETIME warranty. Our US-based customer service team is available to assist you during standard business hours for any questions or support needs.
For assistance, please visit the Mount-It! website or contact our customer support directly.
