1. Producte acabatview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Fre mecànic: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Motor d'alta capacitat: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Disseny ergonòmic: Compact and ergonomic form for comfortable handling.
- Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Instruccions de seguretat
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Seguretat general
- Utilitzeu sempre l'equip de protecció individual (EPI) adequat, com ara ulleres de seguretat, protecció auditiva, guants i una màscara antipols.
- Assegureu-vos que la peça de treball estigui ben ferma clamped abans de l'operació.
- Keep hands clear of rotating parts and the cutting/grinding area.
- No utilitzeu l'eina en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
- Mantingueu els nens i els espectadors allunyats mentre feu servir una eina elèctrica.
Seguretat elèctrica
- Assegureu-vos que la font d'alimentació voltage matches the rating on the tool's nameplate.
- No abuseu del cordó. No utilitzeu mai el cable per transportar, estirar o desconnectar l'eina elèctrica. Mantingueu el cable allunyat de la calor, l'oli, les vores afilades o les peces mòbils.
- Si s'utilitza una eina elèctrica a l'anunciamp La ubicació és inevitable, utilitzeu un subministrament protegit per un dispositiu de corrent residual (RCD).
Specific Angle Grinder Safety
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Components i característiques
Components clau:
- Cos principal: Houses the motor, electronics, and gearbox.
- Guàrdia de protecció: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Botó de bloqueig de l'eix: For easy disc changes.
- Interruptor lliscant: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Vendes d'aire: For motor cooling and dust expulsion.
4. Configuració
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Mounting the Protective Guard
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Manteniu premut el botó de bloqueig de l'eix.
- Place the inner clampbrida a l'eix.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- Enrosqueu el clamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Allibereu el botó de bloqueig de l'eix.
5. Instruccions de funcionament
Encès/Apagat
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Control de velocitat variable
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Subjecteu sempre el molinet fermament amb les dues mans.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Manteniment
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Neteja
- Desconnecteu sempre l'eina abans de netejar-la.
- Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
- Netegeu l'exterior de l'eina amb anunciamp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
Raspalls de carboni
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Emmagatzematge
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'eina no s'inicia | Sense font d'alimentació Restart interlock activated (after power failure) Cable d'alimentació malmès | Comproveu la connexió d'alimentació Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| L'eina s'atura durant el funcionament | Protecció de sobrecàrrega activada Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| Vibració excessiva | Worn or damaged disc Disc mal muntat Mànec solt | Substituïu el disc Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Escombretes de carbó gastades Dust buildup in vents | Have brushes inspected/replaced by service center Netegeu a fons les sortides d'aire |
8. Especificacions
| Característic | Valor |
|---|---|
| Número de model | 447668 |
| Entrada de potència | 1700 W |
| Potència de sortida | 1050 W |
| Voltage | 230 V |
| Freqüència | 50/60 Hz |
| Màx. Diàmetre del disc | 125 mm |
| Velocitat sense càrrega | 2800-11500 rpm |
| Tool Holder (Angle Grinder) | M14 |
| Longitud del cable | 4 m |
| Dimensions (L x A x A) | 340 x 77 x 105 mm |
| Pes | 2.6 kg |
| Color | Vermell, Negre, Plata |
| Material | Metall |
9. Garantia i Suport
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex weblloc web o a l'embalatge del producte.
