Paulmann Cole 93404 LED Recessed Spotlight Instruction Manual

Introducció

Thank you for choosing the Paulmann Cole 93404 LED Recessed Spotlight. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting product. Please read these instructions carefully before installation and retain them for future reference.

Image: Paulmann Cole recessed spotlights in various modern color combinations, designed to be glare-free and suitable for diverse living styles.

Informació de seguretat

• Seguretat elèctrica: Installation should only be performed by a qualified electrician in accordance with local wiring regulations. Ensure the main power supply is switched off before commencing any installation or maintenance work.
• Voltage: This product operates on 230V AC.
• Classificació IP: The Paulmann Cole 93404 has an IP44 rating, making it splash-proof and suitable for damp rooms and covered outdoor areas. However, it is not suitable for direct water immersion. Refer to the IP zone diagram for bathroom installation guidelines.
• Calor: Do not cover the luminaire with insulating material unless specifically designed for it. Ensure adequate ventilation around the fixture.
• Font de llum: The LED light source is not user-replaceable in the traditional sense, but the LED coin module can be exchanged.

Image: Diagram illustrating IP protection zones in a bathroom, indicating where IP44, IP65, and IP67 rated luminaires can be safely installed. The Cole spotlight is splash-proof and rust-free, suitable for damp rooms and covered outdoor areas.

Contingut del paquet

El paquet inclou els components següents:

• 3 x LED Recessed Spotlights (Cole model, black/gold)
• 3 x LED Light Sources (GU10 base, 6.5W, 2700K, 460 Lumen)
• 3 x Connection Boxes with Double Quick Clamps
• Instruccions de muntatge

Image: The individual components of the Paulmann Cole 3-pack recessed spotlights, including the LED light source, the spotlight housing, and the connection box.

Configuració i instal·lació

Seguiu aquests passos per a una instal·lació correcta:

1. Prepara el sostre: Ensure the power supply is disconnected. Cut a circular hole in the ceiling. The recommended hole diameter is 80mm. (Note: Some users have successfully installed in holes from 76mm to 83mm).
2. Connecteu el cablejat: Open the connection box. Connect the 230V AC mains wiring to the double quick clamps inside the connection box. Ensure secure connections for live (L) and neutral (N) wires.
3. Insert LED Coin: Place the LED light source (LED coin) into the spotlight housing.
4. Munta el focus: The spotlight features pre-assembled retaining springs. Fold these springs upwards and insert the spotlight into the prepared ceiling hole. The springs will hold the fixture securely in place.
5. Link Multiple Units (Optional): These spotlights are infinitely linkable. If installing multiple units, ensure proper wiring connections between each fixture's connection box.
6. Restaura l'alimentació: Once all spotlights are securely installed and wired, restore power to the circuit.

Image: Installation diagram showing the side profile of the recessed light, its connection box, and the required installation depth of 55mm. It highlights easy installation with 230V direct connection, no transformer needed, infinite linkability, included connection box with double quick clamps, and pre-assembled retaining springs.

Imatge: Un primer pla view of the connection box, showing the internal quick clamps for easy and secure wiring connections.

Instruccions de funcionament

The Paulmann Cole 93404 LED Recessed Spotlight features a 3-step dimming function controlled by a standard wall switch.

• Encesa inicial: Upon first activation, the spotlights will illuminate at 100% brightness.
• Passos d'atenuació: To cycle through the dimming levels, quickly switch the light OFF and then ON again using your standard wall switch.
• Nivells de brillantor: The light will cycle through 100%, 50%, and 25% brightness.
• Restablir: If the light is switched off for more than approximately 5 seconds, it will reset to 100% brightness upon the next power-on.
• Color clar: The spotlights emit a warm white light at 2700 Kelvin, providing a cozy and relaxing ambiance.

Image: Diagram illustrating the 3-step dimming function of the Paulmann Cole spotlight. It shows how to dim the light from 100% to 50% and 25% using a standard wall switch, and highlights the warm white light at 2700K.

Manteniment

• Neteja: Desconnecteu l'alimentació abans de netejar-la. Netegeu l'aparell amb un drap suau i sec. No utilitzeu netejadors abrasius ni dissolvents.
• LED Coin Replacement: The LED coin module is designed to be replaceable. To replace, disconnect power, gently remove the old LED coin, and insert a new compatible Paulmann LED coin.

Image: Diagram illustrating the process of replacing the LED coin module within the recessed spotlight, emphasizing the modular design for easy maintenance.

Resolució de problemes

• La llum no s'encén:
  • Check if the main power supply is connected and switched on.
  • Verify all wiring connections in the junction box are secure.
  • Ensure the LED coin is correctly seated in the fixture.
• La funció d'atenuació no funciona:
  • Ensure you are using a standard wall switch. The 3-step dimming is integrated into the LED driver and does not require an external dimmer switch.
  • Perform the ON/OFF cycle quickly to activate the dimming steps. A slow cycle may reset it to 100%.
  • If the issue persists, try replacing the LED coin.
• Llum parpellejant:
  • Comproveu si hi ha connexions de cablejat soltes.
  • Assegureu-vos que el voltagEl subministrament és estable.
  • If using an external dimmer, it may be incompatible with the integrated dimming function. Remove the external dimmer.

Especificacions

Garantia i Suport

This Paulmann Cole 93404 LED Recessed Spotlight comes with a Garantia del fabricant de 5 anys. For warranty claims or technical support, please contact Paulmann customer service or your retailer with proof of purchase.

For further assistance, please visit the official Paulmann website or consult the detailed product page where you purchased the item.

Image: Paulmann brand logo.