Introducció
This manual provides instructions for the Extreme Networks Summit X460-24p, a high-performance, managed Layer 3 Ethernet switch designed for enterprise and data center environments. It features 24 Gigabit Ethernet ports with Power over Ethernet (PoE) capabilities, along with additional SFP and shared Gigabit SFP ports for flexible connectivity.
Informació de seguretat
Pautes de seguretat
- Always disconnect all power supply inputs before removing any panel for servicing.
- This device contains a Class 1 Laser product. Avoid direct eye exposure to beam.
- Assegureu-vos de posar a terra correctament durant la instal·lació.
- Refer to the installation manual for power cord selection and additional compliance markings.
Contingut del paquet
Què hi ha a la caixa
- Extreme Networks Summit X460-24p Switch
- Cable d'alimentació (específic per a cada regió)
- Kit de muntatge en bastidor
- Documentació (aquest manual)
Producte acabatview
The Summit X460-24p switch is designed for efficient network management and high-speed data transfer.
Panell posterior
This image displays the rear panel of the Summit X460-24p switch, highlighting the power input, fan modules, and the SummitStack ports. The overall chassis is purple.
Un detallat view of the SummitStack ports (Stack Port 1 and Stack Port 2) located on the rear of the switch, used for stacking multiple switches.
Etiqueta del producte
This label provides critical identification information for the switch, including Model: 16403, Summit X460-24p, System No.: 800323-00-03, and Serial No.: 1052G-03941.
Components opcionals
This image shows the label for an optional Extreme Networks Summit 750W PoE AC Power Supply Unit (PSU), Model 10931, System No. 800382-00-03, Serial No. 1053A-41986.
This image displays the label for an optional Extreme Networks SummitStack Module, Model 16419, System No. 800384-00-01, Serial No. 1122G-02565.
Configuració
Guia d'instal·lació
Muntatge en bastidor
The Summit X460-24p is designed for standard 19-inch rack mounting. Use the provided rack-mounting kit to secure the switch in a server rack. Ensure adequate ventilation around the unit.
Potència de connexió
Connect the power cord to the AC power inlet on the rear of the switch and then to a grounded electrical outlet. The switch will power on automatically.
Connexió de cables de xarxa
- Connect Ethernet cables from your network devices to the 24 10/100/1000Base-T PoE ports on the front panel.
- For uplink or fiber connections, use the SFP or shared Gigabit SFP ports.
- For stacking, connect SummitStack ports on multiple switches using appropriate stacking cables.
Initial Configuration Access
Access the switch's management interface via a console cable connected to the console port, or through a web browser if the switch has a default IP address configured. Refer to the Extreme Networks documentation for detailed initial setup procedures.
Instruccions de funcionament
Funcionament bàsic
Encès/Apagat
The switch powers on automatically when connected to a power source. To power off, disconnect the power cord. For proper shutdown, it is recommended to use the software-based shutdown command if available.
Indicadors LED
Observe the LED indicators on the front panel for status information regarding power, system health, port activity, and PoE status. Consult the full product documentation for a detailed explanation of each LED's behavior.
Interfície de gestió
The switch can be managed via a Command Line Interface (CLI) accessible through the console port or Telnet/SSH, or through a webinterfície gràfica d'usuari (GUI) basada en.
Manteniment
Cura i Manteniment
Neteja
Keep the switch clean and free of dust. Use a soft, dry cloth for external cleaning. Do not use liquid or aerosol cleaners.
Actualitzacions de firmware
Periodically check the Extreme Networks support weblloc web per a actualitzacions de firmware per garantir un rendiment i una seguretat òptims. Seguiu les instruccions proporcionades per als procediments d'actualització del firmware.
Mòduls de ventilador i font d'alimentació
The switch may feature hot-swappable fan and power supply modules. Refer to the Extreme Networks documentation for instructions on replacement if necessary.
Resolució de problemes
Problemes comuns
Sense poder
- Ensure the power cord is securely connected to both the switch and the power outlet.
- Comproveu que la presa de corrent funcioni.
Port Link Down
- Comproveu la connexió del cable Ethernet als dos extrems.
- Verifiqueu que el dispositiu connectat estigui encès i funcioni correctament.
- Check the port status via the management interface.
Problemes de connectivitat de xarxa
- Verify IP configuration and network settings.
- Check for conflicting IP addresses.
- Consult network diagnostics tools.
Especificacions
Especificacions tècniques
| Característica | Descripció |
|---|---|
| Model | Summit X460-24p (Part Number: 16403) |
| Ports | 24 x 10/100/1000Base-T PoE+ ports, 4 x shared Gigabit SFP, 4 x SFP |
| Capa | Commutador gestionat de capa 3 |
| Marca | Xarxes extremes |
| Tipus d'interfície | PoE, SFP |
| Número del sistema | 800323-00-03 |
| Número de sèrie | 1052G-03941 |
| UPC | 683332278646 |
Garantia i Suport
Informació de la garantia
This product typically comes with a 90-day limited warranty. For specific warranty terms and conditions, please refer to the official Extreme Networks warranty statement or contact your vendor.
Suport tècnic
For technical assistance, visit the official Extreme Networks support weblloc web o poseu-vos en contacte amb el seu servei d'atenció al client. Tingueu a mà el model i el número de sèrie del producte quan sol·liciteu assistència.