Manual d'usuari del suport de paret per a monitor de TV fix Philips SQM3221/27

1. Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Philips Fixed TV Monitor Wall Mount Bracket, model SQM3221/27. This mount is designed to securely hold most 17-55 inch LED, LCD, OLED, HDTV, flat, and curved screen TVs and monitors weighing up to 55 lbs, with a maximum VESA mounting pattern of 200x200mm. Please read these instructions carefully before installation to ensure safe and proper use.

2. Què hi ha a la caixa

Verify that all components listed below are present before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• Placa de muntatge (x1)
• Suports per a TV (x2)
• Manual d'instruccions (x1)
• Hardware Kit (x1) - Includes various screws, washers, lag bolts, and concrete anchors for different wall types and TV models.

Figura 2.1: Included components and hardware for the Philips SQM3221/27 TV mount.

3. Configuració i instal·lació

This section outlines the steps for installing your Philips Fixed TV Monitor Wall Mount. Ensure you have the necessary tools and understand the process before starting. The mount is designed for secure attachment to drywall studs, concrete, and brick walls.

3.1. Prepare the Wall and TV

1. Locate Studs/Determine Wall Type: For drywall, use a stud finder to locate wooden studs. For concrete or brick, ensure the wall is solid and capable of supporting the weight of the TV and mount.
2. Marca les ubicacions de perforació: Hold the mounting plate against the wall at the desired height and use a pencil to mark the drilling points. Use an integrated bubble level (if available on the mount) or a separate level to ensure the plate is perfectly horizontal.
3. Perforar forats pilot: Drill pilot holes at the marked locations according to the type of wall and the hardware being used (refer to the hardware kit for specific drill bit sizes).
4. Fixeu els suports de TV: Secure the two TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to the VESA mounting holes on your TV.

Figura 3.1: Acabatview of the easy mounting process.

3.2. Mount the Plate and TV

5. Attach Mounting Plate to Wall: Align the mounting plate with the drilled pilot holes and secure it to the wall using the lag bolts and washers for studs, or concrete anchors for masonry. Tighten all fasteners firmly.
6. Penja el televisor: Carefully lift the television (it is recommended to have at least two people for this step) and hook the TV brackets onto the mounting plate. Ensure the TV is properly seated and level.
7. Assegura el televisor: Locate the lockable safety bar or safety screws at the bottom of the TV brackets. Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement or theft.

Figura 3.2: Securing the TV with safety screws.

4. Instruccions de funcionament

The Philips SQM3221/27 is a fixed-position wall mount, meaning once installed, the TV's position is static. There are no adjustable movements for tilt, swivel, or extension. The primary operational feature is the lockable safety bar.

• Lockable Safety Bar: After hanging the TV on the wall plate, ensure the safety screws at the bottom of the TV brackets are fully tightened. This mechanism secures the display in place, preventing accidental slippage and providing protection against theft.

5. Manteniment

Regular maintenance ensures the longevity and safety of your TV wall mount.

• Inspecció periòdica: Annually, inspect all mounting screws and bolts to ensure they remain tight. Over time, vibrations or minor shifts can loosen fasteners.
• Neteja: Netegeu el suport amb un drap suau i sec. Eviteu netejadors o dissolvents abrasius que puguin danyar l'acabat.
• Límit de pes: No supereu la capacitat màxima de pes de 55 lliures.

6. Solució De Problemes

Si teniu problemes durant o després de la instal·lació, consulteu els problemes i solucions habituals següents.

• El televisor no està anivellat:
  • Ensure the wall mounting plate was installed perfectly level. If not, minor adjustments may be possible by slightly loosening and re-tightening the wall screws, or by re-drilling if necessary.
  • Verify that the TV brackets are securely and evenly attached to the back of the TV.
• Maquinari que falta:
  • Check all packaging thoroughly. If parts are genuinely missing, contact Philips customer support for assistance.
• Difficulty tightening safety screws:
  • Ensure adequate clearance behind the TV to access the safety screws. If space is limited, a longer or angled Allen wrench may be required.
  • Verify the TV is fully seated on the wall plate before attempting to tighten.

7. Especificacions

Figura 7.1: Physical dimensions of the Philips SQM3221/27 TV mount.

8. Garantia i Suport

The Philips Fixed TV Monitor Wall Mount Bracket is backed by a limited lifetime replacement pledge. For any questions, issues, or to claim warranty support, please contact the US-based customer support team. They are available Monday-Friday, 7 AM - 8 PM CST.

La informació de contacte normalment es pot trobar a l'embalatge del producte o a la fitxa oficial del fabricant. weblloc.