Robertshaw IMV708

Robertshaw IMV708 W10408179 Refrigerator Water Valve Instruction Manual

Model: IMV708 | Brand: Robertshaw

1. Producte acabatview

The Robertshaw IMV708 W10408179 Refrigerator Water Valve is a replacement component designed to regulate the flow of water to your refrigerator's ice maker and water dispenser. This valve ensures a consistent and controlled water supply for both functions.

Robertshaw IMV708 W10408179 Refrigerator Water Valve

Image: Robertshaw IMV708 W10408179 Refrigerator Water Valve, showing its inlet and outlet connections.

Compatibilitat

This water valve is compatible with various refrigerator brands, including but not limited to: Jacuzzi, KitchenAid, Kenmore, maigtag, creença, Roper, Crosley, IKEA, i Inglis.

It serves as a direct replacement for the following part numbers: 1938614, 2186486, 2188622, 2188708, 2188746, 2205762, 2255457, 2304757, 2304833, 2315534, 4389177, AP5263471, W10408179, W10408179VP, PS3497634.

Qualificació elèctrica

Dual Electrical Rating: 120V AC, 50/60 Hz, 35W | 120V AC, 50/60 Hz, 20W.

2. Informació de seguretat

  • Always unplug the refrigerator de la presa de corrent abans d'intentar qualsevol reparació o manteniment.
  • Turn off the main water supply to the refrigerator before disconnecting any water lines to prevent flooding.
  • Utilitzeu equips de protecció personal adequats, com ara guants i ulleres de seguretat.
  • Si no esteu segurs de cap pas, consulteu un tècnic d'electrodomèstics qualificat.
  • Have a towel or absorbent cloth ready to catch any residual water when disconnecting lines.

3. Configuració i instal·lació

Replacing the refrigerator water valve is a straightforward process that can typically be completed in about 10 minutes. Follow these steps carefully:

Eines necessàries:

  • Half-inch wrench
  • Quarter-inch nut driver
  • Tornavís de cap pla
  • Towel or absorbent cloth

Passos d'instal·lació:

  1. Preparar la nevera: Carefully pull the refrigerator away from the wall to access its rear. Unplug the refrigerator from the electrical outlet and turn off the main water supply valve to the refrigerator.
  2. Accés a la vàlvula: Locate the rear access panel at the bottom of the refrigerator. Use a nut driver or screwdriver to remove the bolts or screws securing this panel, then carefully remove the panel.
  3. Desconnectar el subministrament d'aigua: Identify the existing water inlet valve. Use a half-inch wrench to disconnect the water supply copper tubing from the valve. Be prepared for a small amount of residual water.
  4. Treure la vàlvula antiga: Use a nut driver to remove the screws that secure the old water valve to the refrigerator frame. Carefully disconnect the two wire connectors and the water line hoses from the old valve. Note their positions to ensure correct reassembly.
  5. Instal·lar una vàlvula nova: Position the new Robertshaw IMV708 W10408179 water valve in place. Reconnect the wire connectors and water line hoses to their corresponding ports on the new valve. Ensure all connections are firm and secure.
  6. Assegurar i provar: Reattach the valve to the refrigerator frame with the screws. Reconnect the water supply copper tubing. Turn on the main water supply and carefully check all connections for any leaks. Once confirmed leak-free, plug the refrigerator back into the electrical outlet.
  7. Col·locació final: Replace the rear access panel and push the refrigerator back into its original position.

Guia de vídeo d'instal·lació:

Video: A detailed guide on how to replace the IMV708 W10408179 Refrigerator Water Valve for Whirlpool and compatible models. This video demonstrates the steps for removal and installation of the water valve.

4. Instruccions de funcionament

The Robertshaw IMV708 W10408179 water valve is an automatic component. It functions under the control of your refrigerator's internal systems. When the ice maker calls for water or the water dispenser lever is pressed, the valve opens to allow water to flow. It then closes automatically once the required amount of water has been dispensed or the ice maker cycle is complete.

5. Manteniment

  • Inspecció periòdica: Periodically inspect the water valve and all connected water lines for any signs of leaks, cracks, or corrosion. Early detection can prevent significant water damage.
  • Filtre d'aigua: If your refrigerator has a water filter, ensure it is replaced according to the refrigerator manufacturer's recommendations. A clogged filter can reduce water flow and put undue strain on the water valve.
  • Neteja: Keep the area around the water valve and the rear of the refrigerator clean and free of dust and debris to ensure proper ventilation and operation.

6. Solució De Problemes

No Water to Ice Maker or Dispenser:

  • Comprovació del subministrament d'aigua: Ensure the main water supply valve to the refrigerator is fully open.
  • Connexió d'alimentació: Verify the refrigerator is plugged in and receiving power.
  • Kinked Water Line: Inspect the water lines behind the refrigerator for any kinks or blockages that might restrict water flow.
  • Clogged Water Filter: A clogged water filter can severely restrict water flow. Replace the water filter if it's due for replacement.
  • Faulty Valve: If the valve is leaking or not activating, it may need replacement.

Fuites d'aigua:

  • Acció immediata: Immediately turn off the water supply to the refrigerator and unplug it.
  • Inspeccionar connexions: Check all connections to the water valve and hoses for tightness. Tighten any loose fittings.
  • Damaged Valve/Hose: If the leak originates from the valve body itself or a damaged hose, the component will need to be replaced.

Dispensació lenta d'aigua:

  • Filtre d'aigua: A partially clogged water filter is a common cause. Replace the filter.
  • Baixa pressió d'aigua: Verify that your household water pressure is adequate.

7. Especificacions

CaracterísticaEspecificació
MarcaRobertshaw
Número de modelIMV708
Número de partIMV708
MaterialMetall
Acabat exteriorChrome
Tipus de connexió d'entradaRoscada
Tipus de connexió de presaG Connector
Nombre de Ports3
Mida de connexió de presa0.25 polzades
Especificació MetUL
Pes de l'article9.6 unces
Dimensions del paquet8.19 x 4.84 x 3.43 polzades
Piles incloses?No
Necessites piles?No
UPC191175006031

8. Informació de la garantia

Warranty information for this specific Robertshaw IMV708 W10408179 water valve is not provided in the product details. For detailed warranty terms and conditions, please refer to the manufacturer's official website or contact Robertshaw customer service directly.

9. Suport

For further assistance, technical support, or inquiries regarding the Robertshaw IMV708 W10408179 Refrigerator Water Valve, please contact Robertshaw customer service through their official channels. You may also consult a qualified appliance technician for professional installation or diagnosis.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.