Hirisi Tackle XT1

Hirisi Tackle XT1 Anti-Theft Motion Detector LED Light Alarm

Manual d'usuari

Introducció

The Hirisi Tackle XT1 is a motion-activated security device designed to monitor your surroundings, particularly useful for carp fishing and camping. It features an integrated infrared sensor with a 120-degree detection angle. When motion is detected within its range, the device activates visual and audible alerts to notify you of approaching individuals or animals. The XT1 can be configured for sound and light alerts or light-only alerts, offering flexibility for various situations.

Contingut del paquet

Configuració

1. Instal·lació de la bateria

The XT1 requires 3 x 1.5V AAA alkaline batteries (not included). To install the batteries:

  1. Localitzeu la tapa del compartiment de la bateria a la part posterior del dispositiu.
  2. Traieu la coberta amb cura.
  3. Introduïu tres piles AAA, assegurant-vos de la polaritat correcta (+/-) tal com s'indica a l'interior del compartiment.
  4. Col·loqueu la coberta del compartiment de la bateria amb seguretat.
The battery compartment of the Hirisi Tackle XT1 motion detector with the cover removed, showing slots for AAA batteries.

Image: Battery compartment with cover removed, showing where to insert AAA batteries.

2. Muntatge del dispositiu

The XT1 is designed to be mounted on a bankstick using its standard 3/8-inch thread. For optimal performance, mount the device at a height of approximately one meter (3.3 feet) to ensure the sensor has a clear line of sight.

Hirisi Tackle XT1 motion detector detecting a deer, illustrating its sensor capabilities.

Image: The XT1 motion detector in an outdoor setting, demonstrating its detection range.

Instruccions de funcionament

1. Encendre/apagar

To turn the device on or off, press and hold the power button located on the side of the unit for 3 seconds.

2. Ajust de volum

To adjust the volume, short press the power button. The device offers 7 adjustable volume levels. Continue short pressing until your desired volume is reached.

3. Detecció i alertes

Once powered on, the XT1's infrared sensor will monitor an area with a 120-degree angle and a detection distance of 2-4 meters. When motion is detected:

4. Silent Mode (LED Only)

The device can be set to operate with only LED alerts and no sound. Refer to the volume adjustment steps; one of the settings will correspond to silent operation with visual alerts only.

Close-up of the Hirisi Tackle XT1 motion detector showing the on/off and volume control button with instructions.

Imatge: Lateral view of the XT1, indicating the on/off and volume control button.

Primer pla views of the Hirisi Tackle XT1 motion detector, showing the sensor and side LEDs.

Imatge: Detallada views of the sensor and side LED lights on the XT1.

Manteniment

Resolució de problemes

ProblemaCausa possibleSolució
El dispositiu no s'encén.Piles gastades o instal·lades incorrectament.Comproveu la polaritat de la bateria. Substituïu-la per piles AAA noves.
No hi ha so del dispositiu.Volume set to minimum or silent mode.Short press the power button to increase volume. Ensure it's not in silent (LED-only) mode.
Poor detection range or false alarms.Obstructions, incorrect mounting height, or environmental factors.Ensure a clear line of sight for the sensor. Mount at approximately 1 meter height. Avoid placing near heat sources or moving foliage.
LEDs not flashing/illuminating.Device not powered on or faulty unit.Ensure the device is powered on. If the issue persists after checking batteries, contact customer support.

Especificacions

Garantia i Suport

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Hirisi Tackle customer service directly. Contact details can typically be found on the manufacturer's official weblloc web o a través del vostre distribuïdor.