UltraPro 24 inch Plug-in Linkable Under Cabinet LED Light Fixture (Model 44107) Instruction Manual

1. Producte acabatview

The UltraPro 24 inch Plug-in Linkable Under Cabinet LED Light Fixture provides high-quality accent lighting designed to enhance your space. This fixture offers a High/Low/Off switch for brightness control, delivering 750 lumens of warm white (2700K) illumination. Its slim design saves space, and the flat plug allows for easy access to outlets. Multiple fixtures can be linked together for extended lighting solutions.

Image: UltraPro 24 inch Plug-in Linkable Under Cabinet LED Light Fixture.

Vídeo del producteview

Video: Official UltraPro Premium Linkable Fixture Video. This video provides a visual guide to the product's features and installation process.

2. Què s'inclou

The package includes everything necessary for installation:

• 1 x UltraPro 24 inch Under Cabinet LED Light Fixture
• Maquinari de muntatge (cargols)
• 1 x 5ft. power cord with flat plug
• 1 x 18in. linking cord

Image: All components included in the package: light fixture, mounting screws, power supply cord, and linking cord.

3. Eines necessàries

For installation, you will need access to the following tools:

• 1/16 inch drill bit for soft wood
• 3/32 inch drill bit for hard wood
• Tornavís
• Pair of pliers (optional)

4. Informació de seguretat

• Ensure your mounting location is dry and capable of supporting the fixture.
• The mounting location should be a suitable distance from the light fixture to reach the nearest power outlet.
• NO install the LED light fixture while it is plugged into an outlet.
• If you are not comfortable installing the fixture, contact a qualified electrician.

5. Instal·lació

Step 1: Prepare Mounting Location

Identify the desired location for your under cabinet light. Ensure the surface is clean and dry. Consider the dimensions of the fixture and the reach of the power cord to the nearest outlet.

Image: Product dimensions (24.0 inches length, 0.8 inches height, 2.6 inches width) for planning installation.

Image: The flat plug design allows for space-saving and easy access to outlets.

Pas 2: Muntar el dispositiu

1. Hold the fixture in the desired mounting position.
2. Using the keyhole tabs on either end of the fixture as a guide, mark the locations for the mounting screws.
3. Pre-drill holes at the marked spots using the appropriate drill bit for your cabinet material (1/16 inch for soft wood, 3/32 inch for hard wood).
4. Insert the mounting screws into the pre-drilled holes, leaving approximately 1/8 inch of the screw head protruding from the surface.
5. Align the keyhole tabs of the fixture with the protruding screw heads.
6. Slide the fixture into place to secure it. If necessary, tighten the screws further to ensure the fixture is firmly mounted.

Refer to the product video (0:55 mark) for a visual demonstration of the mounting process.

Pas 3: connecteu l'alimentació

1. Plug the 3-pin connector end of the 5ft. power cord into the designated port on the light fixture.
2. Finally, plug the flat plug of the power cord into a standard 120VAC 60Hz electrical outlet.

Refer to the product video (1:17 mark) for a visual demonstration of connecting power.

6. Funcionament

To operate the light fixture:

• Locate the power button/switch on one end of the fixture.
• Press the switch to cycle through the available brightness settings: ALTA, BAIXA, i OFF.

Refer to the product video (1:27 mark) for a visual demonstration of operating the light.

7. Adding Additional LED Fixtures

The UltraPro Under Cabinet LED Light Fixture is linkable, allowing you to connect multiple units for extended lighting. Keep in mind the maximum linkable units indicated on the product packaging (up to 30 fixtures).

1. After securing the first fixture and connecting its power, install additional LED fixtures following the mounting steps outlined above.
2. Use the provided 18-inch linking cord to connect the additional fixtures to the main fixture or to each other. Plug one end of the linking cord into the output port of the first fixture and the other end into the input port of the next fixture.
3. Ensure all connections are secure. All linked fixtures will operate simultaneously from the main fixture's power switch.

Image: Demonstration of linking multiple UltraPro Under Cabinet Lights using the provided linking cord.

Refer to the product video (1:34 mark) for a visual demonstration of linking additional fixtures.

8. Manteniment

To ensure the longevity and optimal performance of your UltraPro LED light fixture, follow these simple maintenance guidelines:

• Neteja: Disconnect power before cleaning. Use a soft, dry cloth to wipe the fixture. Avoid abrasive cleaners, solvents, or harsh chemicals, as they may damage the finish or electrical components.
• Inspecció: Periodically check the power cord and linking cords for any signs of damage, fraying, or loose connections. Ensure the fixture remains securely mounted.
• Vida útil LED: The LED lights are designed for a long lifespan and do not require bulb replacement.

9. Solució De Problemes

If you encounter any issues with your UltraPro LED light fixture, refer to the following troubleshooting steps:

Si el problema persisteix després de provar aquestes solucions, poseu-vos en contacte amb l'atenció al client.

10. Especificacions

11. Garantia i Suport

This UltraPro LED light fixture comes with a Garantia limitada de per vida. For specific details regarding the warranty coverage, please refer to the documentation included with your product or visit the manufacturer's weblloc.

For technical support, troubleshooting assistance, or warranty claims, please contact UltraPro customer service. Contact information can typically be found on the product packaging or the official UltraPro weblloc.