Technaxx Mini Nature Wild Cam TX-117 User Manual

Introducció

This manual provides detailed instructions for the setup, operation, and maintenance of your Technaxx Mini Nature Wild Cam TX-117. Designed for both indoor and outdoor use, this camera is ideal for observing wildlife, monitoring property, and enhancing home security. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.

Contingut del paquet

En desempaquetar, comproveu que tots els elements que s'enumeren a continuació hi són presents i en bon estat:

• Technaxx Mini Nature Wild Cam TX-117
• Mini cable USB
• Cinturó de muntatge
• 4x piles AA
• Manual d'usuari (aquest document)

Figure 1: Contents of the Technaxx Mini Nature Wild Cam TX-117 package.

Producte acabatview

The Technaxx Mini Nature Wild Cam TX-117 is a compact and robust wildlife camera. It features a 1.9-inch TFT LCD display for easy navigation and preview, a 12MP camera for high-resolution photos, and Full HD 1080P video recording. Equipped with a PIR sensor and IR LEDs, it offers motion-activated recording and night vision capabilities. The IP56 waterproof rating ensures durability in various outdoor conditions.

Figura 2: frontal i lateral view of the Technaxx Mini Nature Wild Cam TX-117.

Figura 3: Detall frontal view of the camera, showing the LCD display and control interface.

Figura 4: A baix view of the camera, illustrating the external power input (6V/1.5A) and Mini USB port.

Configuració

1. Instal·lació de la bateria

The camera requires 4x AA batteries for operation. These are included in the package. Ensure correct polarity when inserting the batteries.

1. Open the two side clips on the camera to access the interior compartment.
2. Locate the battery slots.
3. Insert the 4x AA batteries according to the polarity markings (+/-) inside the compartment.
4. Close the compartment securely with the side clips.

2. Instal·lació de la targeta MicroSD

A MicroSD card (up to 32GB, not included) is required to store photos and videos.

1. With the camera compartment open, locate the MicroSD card slot.
2. Insert the MicroSD card into the slot until it clicks into place. Ensure the card is oriented correctly as indicated by the diagram near the slot.
3. Close the camera compartment.

3. Muntatge de la càmera

The included mounting belt allows for flexible placement of the camera.

1. Thread the mounting belt through the two loops on the back of the camera.
2. Secure the camera to a tree or post using the belt. Ensure the camera is stable and facing the desired area. The long strap provides ample length for various tree sizes.
3. Adjust the camera's angle to capture the intended field of view. The front-facing LCD screen can assist in aiming the camera.

Figure 5: Camera mounted on a tree, ready for operation.

Instruccions de funcionament

1. Powering On/Off and Test Mode

The camera has a three-position switch located inside the compartment:

• DESACTIVAT: Powers down the camera.
• PROVA: Activates the LCD screen and allows access to the menu settings. Use this mode for setup and configuration.
• ACTIVITAT: Activates the camera for recording. The LCD screen will turn off after a few seconds, and the camera will begin motion-activated recording.

2. Navegació del menú

In TEST mode, use the control buttons (MENU, UP, DOWN, LEFT, RIGHT, OK, PLAYBACK) to navigate the settings.

Figure 6: Camera LCD display showing a captured image.

Els paràmetres clau inclouen:

• Mode: Select between Photo, Video, or Photo & Video.
• Resolució fotogràfica: Choose from 12MP, 8MP, 5MP, 3MP, 2MP, or 1MP.
• Sèrie de fotos: Set to capture 1, 2, or 3 photos per trigger.
• Resolució de vídeo: Select from 1920x1080P, 1280x720P, 720x480P, 640x480P, or 320x240P.
• TL Video Resolution: Time-Lapse video resolution options (e.g., 3072x1728P, 2304x1296P).
• Durada del vídeo: Set video clip duration from 3 seconds up to 10 minutes.
• Enregistrament d'àudio: Enable or disable audio capture with video.
• Shot Lag: Adjust the delay between consecutive captures (e.g., 5 seconds to 60 minutes).
• Distància IR: Set the infrared sensor distance to Near, Middle, or Far.
• Sensitivity Motion Sensor: Adjust motion sensor sensitivity to Low, Middle, or High.
• Target Recording Time: Enable or disable scheduled recording times.
• Laps de temps: Choose Normal, TL Video, or Off. TL Video records photos and compiles them into a video.
• Idioma: Seleccioneu l'idioma de visualització.
• Captura sense fi: Turn On or Off. When On, the camera will overwrite the oldest filequan la targeta MicroSD està plena.
• Hora i data: Estableix l'hora i la data actuals.
• Foto St.amp: Enable or disable date/time stamp a les fotos.
• Protecció amb contrasenya: Set a password for device access.
• So de bip: Enable or disable menu navigation sounds.
• Formateu la targeta de memòria: Esborra totes les dades de la targeta MicroSD.
• Número de sèrie: View the device's serial number.
• Restableix la configuració: Restaura tota la configuració als valors predeterminats de fàbrica.
• Versió: View la versió del firmware.

Manteniment

• Neteja: Feu servir un drap suau i sec per netejar la lent i la carcassa de la càmera. Eviteu productes de neteja o dissolvents abrasius.
• Substitució de la bateria: Replace all 4x AA batteries simultaneously when the battery indicator shows low power. Do not mix old and new batteries.
• Targeta MicroSD: Regularly back up data from the MicroSD card and format it periodically to maintain optimal performance.
• Emmagatzematge: Quan no la feu servir durant períodes prolongats, traieu les piles i guardeu la càmera en un lloc fresc i sec.

Resolució de problemes

• La càmera no s'encén: Comproveu la instal·lació de la bateria i assegureu-vos que les bateries estiguin carregades.
• No s'han gravat fotos/vídeos: Verify MicroSD card is inserted correctly, formatted, and has sufficient space. Check motion sensor sensitivity and shot lag settings.
• Mala qualitat d'imatge/vídeo: Ensure the lens is clean. Adjust resolution settings. Consider lighting conditions.
• Motion sensor not triggering: Adjust sensitivity settings. Ensure no obstructions are blocking the sensor.
• Red hue in footage: This can sometimes occur due to specific lighting conditions or reflections. Ensure the camera is not pointed directly at strong light sources or reflective surfaces.

Especificacions

Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the contact details provided in the original product packaging or visit the official Technaxx weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.