VSYSTO Motorcycle Drive Recorder Anti-Theft Handlebar Mount User Manual

1. Introducció

Gràcies per la compraasing the VSYSTO Motorcycle Drive Recorder Anti-Theft Handlebar Mount. This all-metal bracket is designed to securely hold your drive recorder on motorcycle handlebars, offering robust protection and flexible positioning. It features a durable construction and an anti-theft design to safeguard your device.

This mount is compatible with various VSYSTO drive recorder models and standard GoPro-style camera adapters.

2. Contingut del paquet

• VSYSTO Anti-Theft Handlebar Mount (1 unit)
• Dedicated Hex Wrench (1 unit)
• Maquinari de muntatge (cargols, femelles)

3. Compatibilitat

This mount is specifically designed for the following VSYSTO drive recorder models:

• VSYSTO A6F
• VSYSTO A2F
• VSYSTO A2X
• VSYSTO B2U
• VSYSTO P4.5

It also supports various commercially available camera adapters and brackets that utilize the GoPro standard mounting interface.

4. Informació de seguretat

• Ensure all screws are tightened securely before riding to prevent the device from falling off.
• No obstruïu el vostre view or interfere with the operation of your motorcycle controls when installing the mount.
• Regularly check the mount for any signs of wear or loosening, especially after long rides or exposure to vibrations.
• Installation should be performed by an adult or under adult supervision.

5. Configuració i instal·lació

Follow these steps to install the VSYSTO handlebar mount and attach your drive recorder:

5.1. Fixació del suport al manillar

1. Identify a suitable position on your motorcycle's handlebar that does not obstruct your view or interfere with controls.
2. Loosen the screws on the handlebar clamp section of the mount using the dedicated hex wrench.
3. Col·loqueu el clamp around the handlebar and align it to your desired position.
4. Tighten the screws firmly with the hex wrench until the mount is securely fixed to the handlebar. Do not overtighten.

Image: The VSYSTO handlebar mount shown with its hex wrench and examples of installation on motorcycle handlebars, demonstrating its secure fit and adjustability.

5.2. Attaching Your Drive Recorder

1. The mount features a universal interface compatible with GoPro standard brackets. Attach your drive recorder's adapter or bracket to the mount's top plate.
2. Secure the drive recorder to the mount using the appropriate screws or locking mechanisms provided with your recorder or adapter.
3. Ensure the connection is firm and the drive recorder is stable.

Image: The VSYSTO mount displaying its compatibility with various VSYSTO drive recorder models (A2F, A2X, P4.5, P6F, A6X) and its adjustable design.

6. Funcionament i ajust

The VSYSTO mount offers extensive adjustability for optimal viewangles:

• Rotació de 360°: The entire mount can be rotated 360 degrees around the handlebar axis, allowing for flexible positioning.
• Ajust d'inclinació de 270°: The tripod head section, which secures the main unit (drive recorder), can be adjusted up to 270 degrees vertically. This allows you to fine-tune the camera's tilt angle.

To adjust the angle, slightly loosen the relevant adjustment screws, position the device as desired, and then re-tighten the screws firmly using the hex wrench.

7. Manteniment

• Neteja: Netegeu la muntura amb un drap suauamp drap per eliminar la pols i la brutícia. Eviteu utilitzar productes químics aggressivs o netejadors abrasius.
• Inspecció: Periodically inspect all screws and joints for tightness. Re-tighten any loose components using the dedicated hex wrench.
• Emmagatzematge: If removing the mount for extended periods, store it in a dry, cool place away from direct sunlight.

8. Solució De Problemes

• Mount feels loose on handlebar: Assegureu-vos que el manillar estigui ben tancatamp screws are fully tightened with the hex wrench. If the handlebar diameter is too small, consider using rubber shims (not included) for a tighter fit.
• Device wobbles or shakes: Check that the connection between the drive recorder and the mount's top plate is secure. Ensure all adjustment screws on the mount are tightened.
• Dificultat per ajustar l'angle: Loosen the adjustment screws slightly more before attempting to reposition. Ensure no debris is obstructing the moving parts.

9. Especificacions

Image: Detailed dimensions of the VSYSTO handlebar mount, including height, width, and clamp diameter, for reference during installation.

10. Garantia i Suport

The VSYSTO Motorcycle Drive Recorder Anti-Theft Handlebar Mount (under the Motocam product line) comes with a six-month warranty period des de la data de compra. Aquesta garantia cobreix defectes de fabricació i defectes de materials en condicions d'ús normal.

For warranty claims, technical support, or any inquiries regarding your product, please contact VSYSTO customer service through the retailer where you purchased the product or visit the official VSYSTO weblloc per obtenir informació de contacte.

Si us plau, conserveu el comprovant de compra per validar la garantia.