Instruccions importants de seguretat
Please read and understand all instructions before operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.
- ADVERTIMENT: To avoid electric shock, always unplug the lamp from the power outlet before cleaning or changing the bulb.
- Do not use with a damaged cord or plug. If the cord or plug is damaged, discontinue use immediately and contact customer service.
- No submergiu la lamp in water or any other liquid. This product is not waterproof.
- Assegureu-vos que la bombeta vagitage does not exceed the maximum specified (60W). Using a higher wattage bulb can cause overheating and fire.
- This product is designed for indoor use only. Do not use outdoors or in wet locations.
- Mantenir allunyat de materials inflamables.
Contingut del paquet
Verifiqueu que tots els components siguin presents i no estiguin danyats:
- Feit Electric Gray Industrial Style Table Cube Lamp Base (1)
- Note: Bulb is not included and must be purchased separately.
Image: The Feit Electric CUBE1 Industrial Style Table Lamp Base shown in its retail packaging. The packaging highlights "Vintage Industrial Style" and "e26 MEDIUM BASE", indicating the bulb type.
Configuració i instal·lació
Follow these steps to set up your new lamp base:
- Desempaquetar la Lamp Base: Traieu amb cura la lamp base from its packaging and place it on a clean, stable surface.
- Seleccioneu una bombeta: Choose an E26 (medium) base bulb (not included) with a maximum wattage of 60W. For optimal performance and energy savings, an LED bulb is recommended.
- Instal·leu la bombeta: Assegureu-vos que lamp is unplugged. Gently screw the chosen bulb clockwise into the lamp socket until it is snug. Do not overtighten, as this can damage the socket or the bulb.
- Col·loca la Lamp: Col·loca la lamp base on a stable, flat, and dry surface indoors, away from direct sunlight or heat sources.
- Connecteu-vos a l'alimentació: Connecteu la lamp's power cord into a standard 120V AC electrical outlet. Ensure the plug is fully inserted.
Image: The Feit Electric CUBE1 lamp base with an Edison-style LED bulb already installed, demonstrating the appearance once assembled and ready for use.
Instruccions de funcionament
The Feit Electric CUBE1 lamp base features a convenient in-line mechanical on/off switch for simple operation.
- Encesa: Locate the mechanical switch on the power cord. Press the switch to the "ON" position to illuminate the bulb.
- Apagat: Press the switch to the "OFF" position to turn off the bulb.
Imatge: Un primer pla view of the black in-line mechanical on/off switch located on the braided electrical cord of the lamp, used for controlling power.
Manteniment
Proper care will ensure the longevity of your lamp base.
- Neteja: Desendolleu sempre la lamp from the power outlet before cleaning. Wipe the lamp base with a soft, dry, non-abrasive cloth. Do not use liquid cleaners, abrasive cleaners, or solvents, as these may damage the finish.
- Substitució de bombetes: Assegureu-vos que lamp is unplugged and the bulb has cooled completely before attempting to replace it. Screw out the old bulb counter-clockwise and screw in a new E26 base bulb (max 60W) clockwise.
Resolució de problemes
Si teniu problemes amb el vostre lamp, consulteu la taula següent:
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp no s'encén. | 1. Lamp no està endollat. 2. El bulb està solt o cremat. 3. Power outlet is not functioning. 4. In-line switch is in the "OFF" position. | 1. Ensure the power cord is securely plugged into a working electrical outlet. 2. Tighten the bulb or replace it with a new, working E26 bulb. 3. Test the outlet with another appliance or check your home's circuit breaker. 4. Press the in-line switch to the "ON" position. |
| Lamp parpelleja. | 1. La bombeta està solta. 2. Bulb is incompatible or faulty. 3. Font d'alimentació inestable. | 1. Desendolleu la lamp i apretar la bombeta. 2. Try a different E26 bulb. 3. Connecteu la lamp a una sortida diferent. |
Especificacions
Key technical details for the Feit Electric CUBE1 Lamp Base:
| Característica | Detall |
|---|---|
| Número de model | CUB1 |
| Marca | Feit Electric |
| Dimensions del producte (P x A x A) | 5.42" x 6.98" x 4" |
| Material base | formigó |
| Tipus de base de bombeta | E26 (mitjà) |
| Wat màxtage | 60 watts |
| Tipus de canvi | In-line Mechanical On/Off |
| Font d'alimentació | Elèctric amb cable |
| Entorn d'ús | Només interior |
Garantia i Suport
This Feit Electric product is backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Feit Electric weblloc.
For technical assistance, troubleshooting not covered in this manual, or to inquire about warranty service, please contact Feit Electric Customer Service:
- Feit Electric Weblloc: www.feit.com
- Contact Us Page: www.feit.com/contact-us/
- Feit Electric Amazon Store: Visita la botiga