meross Smart Ceiling Fan Control & Dimmer Light Switch (MFC100) User Manual

1. Introducció

This manual provides detailed instructions for the installation, setup, and operation of your meross Smart Ceiling Fan Control & Dimmer Light Switch (Model MFC100). This device allows you to control your ceiling fan and light independently via the Meross app, voice commands (Apple HomeKit, Amazon Alexa, Google Home), or directly from the wall switch.

Image: meross Smart Ceiling Fan Control & Dimmer Light Switch (MFC100).

The meross MFC100 is a smart wall switch designed to integrate your ceiling fan and light into your smart home system, offering convenient control options.

Informació important de seguretat

• Risc de descàrrega elèctrica: Installation requires handling 120V AC wiring. Ensure power is OFF at the circuit breaker before installation.
• Cable neutre necessari: This switch requires a neutral wire for operation. Verify its presence in your electrical box before proceeding.
• Single-Pole Use Only: Designed for single-pole applications (controlling a fan/light from one location). Not compatible with 3-way switches.
• Instal·lació professional recomanada: Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un electricista qualificat.

2. Compatibilitat

2.1 Requisits de cablejat

The meross MFC100 requires specific wiring in your electrical box:

• Fil neutre: Essential for operation (usually white).
• Line/Hot Wire: (usually black).
• Cable de terra: (bare copper or green insulated wire).
• Separate Load Wires: Your ceiling fan must have two separate load wires – one for the fan and one for the light. If your fan only has one load wire for both, this switch is not compatible.

Image: Wiring diagram for the meross MFC100 switch.

This diagram illustrates the required wiring connections for the meross MFC100. Ensure your electrical box has all five necessary wires: Neutral, Line, Ground, Fan Load, and Light Load.

2.2 Fan and Bulb Compatibility

• Tipus de ventilador: Compatible with pull-chain ceiling fans that lack electronic controls. Not suitable for fans with built-in remote control, Bluetooth/Wi-Fi control systems, or DC motors.
• Tipus de bombeta: Compatible with dimmable LED/CFL bulbs (up to 150W max) and incandescent (INC) bulbs (up to 300W max). Not compatible with smart bulbs.
• Potència del ventilador: Supports fans up to 120W Max.
• Control de velocitat del ventilador: Supports 3 or 4-speed fan control.

Image: Visual guide to fan and bulb compatibility.

This image details the types of bulbs and fans that are compatible or incompatible with the MFC100. It highlights that smart bulbs, fans with integrated electronic controls, or DC motors are not supported.

2.3 Wi-Fi Requirements

• Supports 2.4GHz Wi-Fi networks only. 5GHz Wi-Fi is not supported.
• No separate hub is required for operation.

3. Contingut del paquet

The meross MFC100 package includes the following items:

• 1 x meross Smart Wi-Fi Fan Control (MFC100)
• 1 x Placa frontal
• 1 x Manual d'usuari
• 2 x cargols
• 5 x Wiring Nuts
• 1 x Wire Sticker Sheet

4. Instal·lació

4.1 Llista de comprovació prèvia a la instal·lació

• Verify your ceiling fan has two separate load wires (one for fan, one for light).
• Confirmeu la presència d'un cable neutre a la caixa elèctrica.
• Ensure your fan does not have built-in remote or smart controls.
• Desconnecteu l'alimentació a l'interruptor automàtic abans de començar.

Image: Checklist for wiring and installation.

This image summarizes the critical checks before installation, including wiring, circuit type (single-pole), physical dimensions, and 2.4G Wi-Fi requirement.

4.2 Passos de cablejat

1. Apagueu l'alimentació: Locate the circuit breaker controlling the fan/light switch and turn it OFF. Test the existing switch to ensure power is disconnected.
2. Treure l'interruptor antic: Carefully remove the faceplate and unscrew the old switch from the wall box. Disconnect the wires, noting their connections. Use the provided wire stickers to label each wire (Line, Neutral, Ground, Fan Load, Light Load).
3. Connecta el nou interruptor: Using the provided wiring nuts, connect the wires from the wall box to the corresponding wires on the meross MFC100 switch.
   • Connecteu el Línia (calenta) wire from the wall to the switch's Line wire.
   • Connecteu el Neutre wire from the wall to the switch's Neutral wire.
   • Connecteu el Terra wire from the wall to the switch's Ground wire.
   • Connecteu el Càrrega del ventilador wire from the wall to the switch's Fan Load wire.
   • Connecteu el Càrrega lleugera wire from the wall to the switch's Light Load wire.
4. Interruptor de muntatge: Carefully tuck all wires into the electrical box. Secure the meross MFC100 switch into the wall box using the provided screws.
5. Fixeu la placa frontal: Snap the new faceplate onto the switch.
6. Restaura l'alimentació: Torneu a encendre l'alimentació a l'interruptor.

5. Configuració

5.1 Meross App Setup

1. Baixeu l'aplicació Meross des de l'App Store o Google Play.
2. Register or log in to your Meross account.
3. Toqueu la icona "+" a la cantonada superior dreta per afegir un dispositiu nou.
4. Follow the in-app instructions to connect your MFC100 to your 2.4GHz Wi-Fi network.

Image: Meross app interface for smart fan control.

This image shows the Meross app interface, demonstrating how to control the fan speed and light brightness from your smartphone.

5.2 Smart Home Integration (Apple HomeKit, Alexa, Google Home)

The MFC100 is compatible with major smart home platforms:

• Apple HomeKit:
  1. Disable 5GHz network and connect your phone to a stable 2.4GHz Wi-Fi network.
  2. Ensure your device's operating system is iOS 16 or higher.
  3. Open the Apple Home App, tap "+", then "Add Accessory".
  4. Scan the QR code on the switch or input the setup code.
  5. Follow the onboarding instructions in the Home App.
  6. If adding fails, factory reset the device and restart your phone. You can also visit meross support per a l'assistència.
• Amazon Alexa / Google Home:
  1. Ensure your MFC100 is already set up in the Meross app.
  2. Obre l'aplicació Alexa o Google Home.
  3. Navigate to the "Skills" or "Works with Google" section and search for "Meross".
  4. Enable the Meross skill and link your Meross account.
  5. Discover devices, and your MFC100 should appear.

Image: Step-by-step guide for HomeKit integration.

This image provides a visual walkthrough for connecting your meross MFC100 to Apple HomeKit, including troubleshooting tips.

6. Instruccions de funcionament

6.1 Control manual

• Control del ventilador: Press the fan button to cycle through fan speeds (Off, Low, Medium, High). Double-press to adjust speed settings.
• Control de la llum: Press the light button to turn the light ON/OFF. Double-press to adjust brightness (3 settings).
• Control mestre: A master button may be present to turn both fan and light ON/OFF simultaneously.

6.2 Control d'aplicacions

Use the Meross app to:

• Turn the fan and light ON/OFF.
• Adjust fan speeds (3 or 4 speeds, depending on settings).
• Dim the light from 1% to 100%.
• Access advanced features like scheduling and timers.

Image: App control for fan and light.

This image shows a user controlling their ceiling fan and light using the Meross app on their smartphone, highlighting the dual control functionality.

6.3 Control de veu

Once integrated with your smart home assistant, use voice commands:

• "Hey Siri, set the bedroom fan to high."
• "Alexa, turn up the living room fan speed."
• "Hey Google, dim the light to 50%."

Image: Voice control options.

This image illustrates how to use voice commands with Siri, Alexa, and Google Assistant to control the fan and light functions of the meross smart switch.

7. Característiques

• Programació i temporitzadors: Create custom schedules or countdowns for automatic ON/OFF times for both fan and light. Supports sunrise/sunset settings. Schedules continue to run even if the internet connection is lost.


Image: Scene and schedule settings.

This image illustrates how to set up scenes and schedules within the Meross app to automate your fan and light operation, including sunrise/sunset and auto-off functions.

Video: Setting schedules for automatic fan and light operation.

This video demonstrates how to set up schedules to automatically turn the fan and light on or off at specific times.

• Llum regulable: Smoothly dim your light from 1% to 100% via the app or voice control.

Image: 1%-100% dimmable range.
This image visually represents the light dimming capability of the MFC100, allowing adjustment from 1% to 100% brightness.
• Velocitat del ventilador ajustable: Control your fan with 3 or 4 speed levels (customizable in settings).


Image: Adjustable fan speed levels.

This image demonstrates the adjustable fan speed feature, showing levels from 1 to 4 for customized airflow.

• Backlight Off Mode: Customize the switch's LED backlight to stay on or off, preventing light pollution during sleep.


Image: Backlight off feature for undisturbed sleep.

This image highlights the "Backlight Off" feature, which allows users to disable the LED light on the switch for a more comfortable sleeping environment.

• Superfast Local Control: Enjoy millisecond response times and no drop-off with local control when you are at home, ensuring quick and reliable operation.

Image: Superfast local control diagram.
This diagram illustrates the efficiency of Meross's local control, showing significantly faster response times compared to other devices that rely solely on cloud communication.
• Offline Control: Preset routines in the Meross app will continue to run even if your internet connection is temporarily lost.


Image: Offline control functionality.

This image demonstrates that the meross smart switch can maintain scheduled operations even when the internet connection is unavailable.

• Característiques de seguretat integrades: The MFC100 features fire-retardant housing (UL94-V0 rating) and is FCC/IC/ETL certified for safe use.


Image: Safety and quality features.

This image details the safety features of the MFC100, including its fire-retardant housing, broad bulb compatibility, and various safety certifications.

8. Manteniment

• Neteja: Wipe the switch and faceplate with a soft, dry cloth. Do not use liquid cleaners or aerosols.
• Actualitzacions de firmware: Regularly check the Meross app for firmware updates to ensure optimal performance and security.

9. Solució De Problemes

• L'interruptor no respon:
  • Check the circuit breaker to ensure power is ON.
  • Verifiqueu que totes les connexions de cablejat siguin segures.
  • Perform a factory reset (refer to the Meross app or support for instructions).
• No es pot connectar a Wi-Fi:
  • Assegureu-vos que la vostra xarxa Wi-Fi sigui de 2.4 GHz.
  • Move the switch closer to your Wi-Fi router.
  • Temporarily disable 5GHz on your router during setup if possible.
  • Comproveu la vostra contrasenya de Wi-Fi.
• Light Not Dimming / Fan Speed Issues:
  • Confirm your bulbs are dimmable and within the wattage limits (300W INC, 150W LED/CFL).
  • Ensure your fan is compatible (not DC motor, no integrated smart controls).
  • Use the Meross app's compatibility test feature to check for optimal dimming performance.

Image: Meross app compatibility test.

This image displays the Meross app's built-in compatibility test, which helps ensure your lights are fully compatible and provide optimal dimming.

10. Especificacions

11. Garantia i assistència

meross products come with a standard manufacturer's warranty. For detailed warranty information, product support, or technical assistance, please visit the official meross weblloc o poseu-vos en contacte amb el seu equip d'atenció al client.

Assistència en línia: www.meross.com/support

Suport per correu electrònic: support@meross.com