ThreeH AC10 Digital Wood Cube Alarm Clock User Manual

1. Introducció

This manual provides comprehensive instructions for the ThreeH AC10 Digital Wood Cube Alarm Clock. This device features a clear LED display, sound control, and multiple functions including time, date, temperature, and alarm settings. Please read this manual carefully to ensure proper operation and to fully utilize all features.

Image 1.1: The ThreeH AC10 Digital Wood Cube Alarm Clock showcasing its primary functions: Time, Alarm, Calendar, 3-Level Brightness, Temperature, and Snooze.

2. Producte acabatview

The ThreeH AC10 is designed with a modern wood cube aesthetic, integrating seamlessly into various home and office environments. Its key features include:

• Pantalla LED: Shows time, date, and temperature.
• Multifuncional: Time (12/24H), Alarm (up to 3), Calendar, Temperature (F/C).
• Control de so: Display activates with sound or touch, conserving energy.
• Brillantor ajustable: Three levels of display brightness.
• Opcions d'alimentació dual: USB cable or AAA batteries.
• Funció de memòria de temps: Retains settings during power interruptions (with backup batteries).

Imatge 2.1: Frontal view of the ThreeH AC10 Digital Wood Cube Alarm Clock.

3. Configuració

3.1 Font d'alimentació

The clock can be powered by either a USB cable or AAA batteries.

• Potència USB: For continuous display and optimal performance, connect the provided USB cable to a 5V DC adapter (not included) or a USB port.
• Potència de la bateria: For portable use or as a backup, install 4 AAA batteries (not included). Note that battery power is primarily for the sound control mode to conserve energy, as continuous display will drain batteries quickly.

3.2 Instal·lació de la bateria

1. Localitzeu el compartiment de la bateria a la part posterior del rellotge.
2. Obriu la tapa de la bateria.
3. Introduïu 4 piles AAA noves, assegurant-vos de la polaritat correcta (+/-).
4. Tanqueu la tapa de la bateria amb seguretat.

Image 3.1: Battery compartment and USB cable connection.

3.3 Identificació de botons

The control buttons are located on the back of the clock:

• SET: S'utilitza per entrar als modes de configuració i confirmar les seleccions.
• AMUNT: Used to increase values or navigate menu options.
• BAIX: Used to decrease values or navigate menu options.
• RESET: A small button (often recessed) to reset the clock to factory defaults. Use a thin object like a paperclip to press.

Image 3.2: Back panel with control buttons and power input.

4. Instruccions de funcionament

4.1 Basic Settings (Time, Date, Temperature Unit)

1. Premeu el botó SET button once to enter the setting mode. The display will flash.
2. Ús UP or ABAIX per ajustar el valor. Premeu SET per confirmar i passar a la configuració següent.
3. The sequence is typically: Year → Month → Day → 12/24H Format → Hour → Minute → Temperature Unit (Celsius/Fahrenheit).
4. After setting the temperature unit, press SET de nou per sortir del mode de configuració.

4.2 Configuració d'alarma

El rellotge admet fins a tres alarmes independents (A1, A2, A3).

1. From normal display mode, press SET repeatedly until 'A1' (or 'A2', 'A3') appears.
2. Mantén premut SET to enter the alarm setting mode. The alarm hour will flash.
3. Ús UP or ABAIX to set the desired alarm hour, then press SET.
4. Ús UP or ABAIX to set the desired alarm minute, then press SET.
5. The display will show 'ON' or '--' (OFF). Use UP or ABAIX to enable (ON) or disable (OFF) the alarm, then press SET per confirmar.
6. Repeat for A2 and A3 if needed.

Image 4.1: Setting multiple alarms (A1, A2, A3).

4.3 Funció de repetició

When an alarm sounds, press any button (except RESET) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (default snooze duration is typically 5 minutes, refer to specific product documentation if available for exact duration). To turn off the alarm completely, press the RESET button or let it ring for its full duration.

4.4 Display Modes (DP-1, DP-2)

The clock offers different display modes:

• DP-1 (Fixed Display): The display shows time continuously.
• DP-2 (Alternating Display): The display cycles between time, date, and temperature.

To switch between DP-1 and DP-2, press the UP button in normal display mode.

Image 4.2: Display modes DP-1 and DP-2.

4.5 Sound Control Mode (Energy-saving)

In sound control mode, the display will turn off after a short period to save energy. It will reactivate when a sound (e.g., clap, tap) or touch is detected.

• To enable/disable sound control, press the ABAIX button in normal display mode.
• When sound control is active, the display will show 'SD' (Sound Detect) or similar indicator. When disabled, it may show '--' or remain continuously on (if powered by USB).

Image 4.3: Illustration of sound control activation.

4.6 Ajust de brillantor

The display has three brightness levels (L1, L2, L3).

1. Manteniu premut el botó UP button in normal display mode.
2. The display will show the current brightness level (e.g., 'L3').
3. Ús UP or ABAIX to cycle through L1 (lowest), L2 (medium), and L3 (highest).
4. Allibera el UP botó per confirmar la selecció.

Image 4.4: Brightness levels L1, L2, L3.

5. Manteniment

• Neteja: Netegeu la superfície del rellotge amb un drap suau i sec. Eviteu utilitzar productes de neteja o dissolvents abrasius.
• Substitució de la bateria: Replace all 4 AAA batteries simultaneously when the display dims or functions become erratic. Do not mix old and new batteries.
• Col·locació: Col·loca el rellotge sobre una superfície estable i plana, allunyada de la llum solar directa, de temperatures extremes i d'alta humitat.

6. Solució De Problemes

• Display is off or not staying on:
      a. Check if the clock is in Sound Control (SD) mode. Press the ABAIX button to toggle this mode. If you desire a continuous display, ensure SD mode is off and the clock is powered via USB.
      b. If using batteries, they might be low. Replace with fresh AAA batteries.
• Difficulty setting time/alarms:
      a. Ensure you are pressing and holding the SET button to enter the setting mode, and pressing it briefly to confirm each step.
      b. Refer to sections 4.1 and 4.2 for detailed instructions.
• Clock resets after power failure:
      a. Ensure backup AAA batteries are installed and have sufficient charge. The batteries provide power memory during USB power interruptions.
• Display is too bright or too dim:
      a. Adjust the brightness levels as described in section 4.6.
• Sense pantalla:
      a. Check power source. Ensure USB cable is securely connected or batteries are correctly installed and charged.
      b. Premeu el botó RESET button using a thin object to perform a factory reset.

7. Especificacions

8. Garantia i Suport

For warranty information and customer support, please refer to the documentation included with your purchase or contact the seller directly. Keep your purchase receipt for any warranty claims.