Producte acabatview
The 3M™ X5-P4PTCS1 Premium 4 Point Chin Strap is designed for use with 3M SecureFit™ Safety Helmet X5000 series. This accessory enhances helmet stability and security. It features a magnetic buckle for easy one-hand operation and quick, smooth adjustment for a customized and secure fit.
- Magnetic buckle for one-hand operation.
- Easy adjustment for a customized fit.
- Specifically designed to fit 3M SecureFit™ X5000 Series Safety Helmets.
Què hi ha a la caixa
One (1) 3M™ X5-P4PTCS1 Premium 4 Point Chin Strap with magnetic buckle.
Configuració i instal·lació
This chin strap is designed to integrate with 3M SecureFit™ Safety Helmet X5000 Series. Ensure your helmet is compatible before installation.
- Enganxeu la corretja: Locate the four attachment points on your 3M SecureFit™ Safety Helmet X5000. Align the strap's connectors with these points and secure them firmly. Refer to your helmet's manual for specific attachment details if needed.
- Position the Chin Strap: Once attached, position the chin strap under your chin.
Image showing the 3M X5-P4PTCS1 Premium 4 Point Chin Strap detached, illustrating its four attachment points and magnetic buckle.
Instruccions de funcionament
- Fastening the Chin Strap: Bring the two ends of the chin strap together under your chin. The magnetic buckle will automatically align and connect with a secure click. Ensure the buckle is fully engaged.
- Ajust de l'ajust: Use the quick-adjustment sliders on each side of the strap to tighten or loosen the fit. The strap should be snug but comfortable, preventing the helmet from shifting without causing discomfort. Ensure two fingers can fit between the strap and your chin.
- Releasing the Chin Strap: To release, simply pull the two halves of the magnetic buckle apart. The magnetic mechanism allows for quick, one-hand disconnection.
Image showing the 3M X5-P4PTCS1 Premium 4 Point Chin Strap with its magnetic buckle connected, demonstrating its compact and secure design.
Manteniment
- Neteja: Clean the chin strap with mild soap and water. Rinse thoroughly and allow to air dry completely before reattaching to the helmet or storing. Do not use harsh chemicals or abrasive cleaners.
- Inspecció: Regularly inspect the chin strap for any signs of wear, tear, fraying, or damage to the buckle mechanism. If any damage is observed, replace the chin strap immediately to maintain safety and performance.
- Emmagatzematge: Store the chin strap in a clean, dry place away from direct sunlight and extreme temperatures.
Resolució de problemes
- La corretja sembla massa fluixa o massa ajustada: Adjust the sliders on both sides of the strap until a comfortable and secure fit is achieved. Ensure the helmet remains stable on your head.
- Magnetic buckle not engaging: Check for any obstructions or debris in the buckle mechanism. Ensure the two halves are aligned correctly. If the buckle is damaged, replace the chin strap.
- Strap detaches unexpectedly: Verify that all four attachment points are securely fastened to the helmet. Inspect the strap and attachment points for damage. If damage is found, replace the chin strap.
Especificacions
- Dimensions del paquet: 9.02 x 7.83 x 2.09 polzades
- Pes de l'article: 2.11 unces
- Fabricant: 3M
- ASIN: B07XF8T6HP
- Número de model de l'article: 94497
- Data de primera disponibilitat: 4 de setembre de 2019
Informació important de seguretat
Els productes industrials i laborals de 3M estan destinats, etiquetats i envasats per a la venda a clients industrials i laborals formats per al seu ús en el lloc de treball. A menys que s'indiqui específicament el contrari a l'embalatge o a la documentació del producte aplicable, aquests productes no estan destinats, etiquetats ni envasats per a la venda o l'ús per part dels consumidors (per exemple, per a la llar, personal, escola primària o secundària, recreatius/esportius o altres usos no descrits a l'embalatge o a la documentació del producte aplicable), i s'han de seleccionar i utilitzar d'acord amb les normatives i normes de salut i seguretat aplicables (per exemple, US OSHA, ANSI), així com amb tota la documentació del producte, les instruccions per a l'usuari, els avisos i altres limitacions, i l'usuari ha de prendre qualsevol acció requerida en virtut de qualsevol retirada, acció de camp o altre avís d'ús del producte. El mal ús dels productes industrials i laborals de 3M pot provocar lesions, malalties, mort o danys materials. Per obtenir ajuda amb la selecció i l'ús del producte, consulteu el vostre professional de seguretat in situ, higienista industrial o altre expert en la matèria. Per obtenir més informació sobre el producte, visiteu www.3M.com.
Suport i garantia
For product support, technical assistance, or warranty information, please contact 3M customer service or visit the official 3M weblloc a www.3M.comConserva el rebut de compra per a reclamacions de garantia.