Amazon Basics A202001701

Amazon Basics 3-Piece Outdoor Patio Glider Bistro Set Instruction Manual

Brand: Amazon Basics | Model: A202001701

1. Introducció

This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your Amazon Basics 3-Piece Outdoor Patio Steel Glider Sling Chair Bistro Dining Set. This set includes two comfortable glider chairs and one bistro table, designed for outdoor relaxation and dining. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.

Amazon Basics 3-Piece Outdoor Patio Glider Bistro Set on a patio
The Amazon Basics 3-Piece Outdoor Patio Glider Bistro Set, featuring two grey glider chairs and a square bistro table, arranged on a patio.

2. Informació de seguretat

Seguiu les següents pautes de seguretat per evitar lesions o danys al producte:

  • Capacitat de pes: Each glider chair has a maximum weight capacity of 250 lbs (113 kg). Do not exceed this limit.
  • Muntatge: Ensure all parts are correctly assembled and fasteners are securely tightened before use. Improper assembly can lead to instability and injury.
  • Supervisió: Mantingueu els nens i les mascotes allunyats de la zona de muntatge. Les peces petites poden ser un perill d'asfíxia.
  • Superfície estable: Always place the furniture set on a flat, level, and stable surface to prevent tipping.
  • Inspecció periòdica: Periodically check all bolts, nuts, and other fasteners to ensure they remain tight. Retighten as necessary.
  • Ús exterior: This set is designed for outdoor use. Prolonged exposure to extreme weather conditions may affect its lifespan.

3. Llista de peces

Abans de començar el muntatge, verifiqueu que tots els components siguin presents i no estiguin danyats. Si falta alguna peça o està danyada, no continueu amb el muntatge. Poseu-vos en contacte amb el servei d'atenció al client per obtenir ajuda.

Components inclosos:

  • Glider Chairs (2)
  • Bistro Table (1)
  • Assembly Hardware (bolts, washers, nuts, tools)

4. Muntatge i muntatge

The Amazon Basics 3-Piece Outdoor Patio Set requires assembly. All necessary hardware and instructions are provided. Follow these general steps for assembly:

  1. Desempaquetar components: Traieu amb cura totes les peces de l'embalatge. Col·loqueu-les sobre una superfície neta i suau per evitar ratllades.
  2. Identifica les parts: Refer to the included diagram to identify each component (chair frames, seat/back fabric, table top, table legs, hardware).
  3. Muntar cadires: Attach the seat and back fabric to the chair frames. Connect the glider mechanisms and base frames. When attaching bolts, thread them loosely first (2-3 turns) before fully tightening. This allows for easier alignment of all parts.
  4. Muntar la taula: Attach the table legs to the table top. Ensure all connections are secure.
  5. Ajustament final: Once all components are assembled, systematically tighten all bolts and nuts using the provided tools. Do not overtighten, as this may strip threads or damage components.
  6. Comprovació d'estabilitat: Gently rock each chair and the table to ensure stability. If any wobbling occurs, recheck connections and tighten fasteners.
Diagram showing dimensions of the assembled glider chair
A diagram illustrating the dimensions of an assembled glider chair, useful for understanding the product's size during setup.

5. Instruccions de funcionament

Using your Amazon Basics Patio Glider Bistro Set is straightforward:

  • Glider Chairs: Sit comfortably in the chair and gently push off with your feet to initiate a smooth, back-and-forth gliding motion. Avoid sudden or forceful movements.
  • Bistro Table: Use the table for placing beverages, snacks, or small decorative items. Do not place excessively heavy objects on the table.
  • Col·locació: Position the set in your desired outdoor area, ensuring it is on a stable, level surface away from potential hazards.
Davant view of an assembled Amazon Basics glider chair
Davant view of an assembled Amazon Basics glider chair, showcasing its grey Texilene fabric and black steel frame.
lateral view of an assembled Amazon Basics glider chair
lateral view of an assembled Amazon Basics glider chair, highlighting the armrests and the glider mechanism at the base.
En angle view of the Amazon Basics bistro table
En angle view of the Amazon Basics bistro table, featuring a square glass top and sturdy black steel legs.

6. Manteniment i cura

Proper maintenance will extend the life and appearance of your patio set:

  • Neteja: Netegeu amb un anunciamp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners, which can damage the finish or fabric.
  • Cura del marc: The steel frame is powder-coated for rust resistance. If scratches occur, touch up with rust-resistant paint to prevent corrosion.
  • Cura del teixit: The Texilene fabric is waterproof. For deeper cleaning, use a soft brush and mild soapy water, then rinse thoroughly and allow to air dry completely.
  • Protecció meteorològica: While designed for outdoor use, covering the set during prolonged periods of harsh weather (heavy rain, snow, intense sun) or when not in use can help preserve its condition.
  • Comprovació de fixació: Regularly inspect and tighten all bolts and nuts to maintain structural integrity.
Primer pla view of the glider mechanism on the chair base
Un primer pla view of the glider mechanism located at the base of the chair, showing the rollers and frame components.

7. Solució De Problemes

If you encounter issues with your patio set, refer to the following common problems and solutions:

ProblemaCausa possibleSolució
Peces que falten o components danyats a l'arribada.Error de fabricació o danys durant l'enviament.Do not assemble. Contact Amazon Basics customer support immediately for replacement parts or a full replacement.
Chairs or table are wobbly after assembly.Fasteners are not fully tightened or parts are misaligned.Ensure the furniture is on a level surface. Recheck all bolts and nuts, tightening them securely. If parts are misaligned, loosen all fasteners, adjust alignment, then retighten.
Glider chairs do not glide smoothly.Obstruction in the glider mechanism or loose connections.Inspect the glider mechanism for any debris or obstructions. Clean if necessary. Ensure all bolts connecting the glider components are tight.
Dificultat per alinear els forats durant el muntatge.Bolts were tightened too early.Loosen all bolts on the section you are working on. Insert all bolts loosely (2-3 turns) before fully tightening any one bolt. This allows for flexibility in alignment.

8. Especificacions

CaracterísticaDetall
Nom del producte3-Piece Outdoor Patio Steel Glider Sling Chair Bistro Dining Set
Número de modelA202001701
MarcaConceptes bàsics d'Amazon
ColorGris
MaterialAlloy Steel (frame), Texilene (seat fabric)
Chair Dimensions (D x W x H)28.74 x 23.62 x 37.4 polzades (73 x 60 x 95 cm)
Table Dimensions (D x W x H)18.11 x 18.11 x 18.11 polzades (46 x 46 x 46 cm)
Capacitat de pes de la cadira113 kg per cadira
Pes total de l'articleAproximadament 55.12 lliures (25 kg)
Muntatge obligatori
Instruccions de curaNetejar

9. Garantia i assistència

Per obtenir informació detallada sobre la garantia, consulteu el document oficial de la garantia:

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Amazon Basics customer support. Have your model number (A202001701) and purchase information ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.