Trevi SLD 3P50 Digital Clock Thermometer User Manual

Introducció

This manual provides detailed instructions for the setup, operation, and maintenance of your Trevi SLD 3P50 Digital Clock Thermometer. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Característiques del producte

• Large LCD Display with Backlight for clear visibility.
• Digital Clock with Time and Date display.
• Integrated Thermometer for ambient temperature readings.
• Programmable Alarm Clock with adjustable settings.
• Snooze Function for temporary alarm delay.
• Battery Powered for portability and convenience.

Contingut del paquet

Si us plau, comproveu el paquet per veure si hi ha els elements següents:

• Trevi SLD 3P50 Digital Clock Thermometer Unit
• Manual d'usuari (aquest document)

Nota: Les piles no estan incloses i s'han de comprar per separat.

Configuració

1. Instal·lació de la bateria

1. Localitzeu la tapa del compartiment de la bateria a la part posterior de la unitat.
2. Feu lliscar o desenganxeu la tapa per obrir el compartiment.
3. Insert the required batteries (typically AAA, refer to the compartment for specific type and polarity) ensuring correct polarity (+ and -).
4. Col·loqueu la coberta del compartiment de la bateria amb seguretat.

Figura 1: Frontal view of the Trevi SLD 3P50 Digital Clock Thermometer, showing the large LCD display with time, date, day, and temperature.

2. Engegada inicial

After installing batteries, the display should illuminate, and the clock will typically show a default time or start from 12:00 AM. You may need to press a button (e.g., "SET" or "MODE") to activate the display if it does not turn on automatically.

Instruccions de funcionament

1. Configuració de l'hora i la data

1. Premeu el botó MODE button repeatedly until the time display starts flashing or you enter the time setting mode.
2. Utilitza el UP or ABAIX buttons (or similar adjustment buttons) to set the hour.
3. Premeu MODE again to move to the minute setting, then use UP/ABAIX per ajustar-se.
4. Continueu prement MODE to cycle through year, month, and date settings, adjusting each with the UP/ABAIX botons.
5. Un cop tots els paràmetres siguin correctes, premeu MODE one last time or wait a few seconds for the settings to save automatically.

2. Configuració de l'alarma

1. Premeu el botó ALARMA botó (o MODE until "AL" or an alarm icon appears) to enter alarm setting mode. The alarm time will likely flash.
2. Utilitza el UP or ABAIX botons per configurar l'hora d'alarma desitjada.
3. Premeu ALARMA again to move to the minute setting, then adjust with UP/ABAIX.
4. Premeu ALARMA once more to confirm and exit alarm setting.
5. To activate or deactivate the alarm, look for a dedicated ALARMA ON / OFF switch or button, or press the ALARMA button briefly outside of setting mode. An alarm icon will appear on the display when active.

3. Funció de posposició

Quan soni l'alarma, premeu el botó SNOOZE / LIGHT button (usually located on top of the unit). The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes). This function can usually be repeated.

4. Funcionament de la retroiluminació

To illuminate the display, press the LLUM botó o el SNOOZE / LIGHT button. The backlight will typically stay on for a few seconds and then turn off automatically to conserve battery power.

5. Visualització de la temperatura

The device continuously displays the ambient temperature. If your model supports switching between Celsius (°C) and Fahrenheit (°F), there may be a small button (often labeled ° C / ° F or located within the battery compartment) to toggle between these units.

Manteniment

• Neteja: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the display or casing.
• Substitució de la bateria: Replace batteries when the display becomes dim or functions become erratic. Always replace all batteries at the same time with new ones of the same type.
• Emmagatzematge: Si no heu d'utilitzar la unitat durant un període prolongat, traieu-ne les piles per evitar fuites i danys.

Resolució de problemes

Especificacions

Figure 2: Dimensions of the Trevi SLD 3P50 Digital Clock Thermometer.

Garantia i Suport

For warranty information or technical support, please refer to the documentation provided at the point of purchase or visit the official Trevi weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.