1. Introducció
This manual provides essential information for the safe and effective use of your uxcell AC 100-127V Synchronous Motor. This motor is designed for applications requiring stable, low-speed rotation, such as in gluing machines, heaters, electrical curtains, stage lighting, and various automated equipment.
The motor features low power consumption, consistent torque, and quiet operation, making it suitable for a range of DIY projects and equipment repairs.
2. Informació de seguretat
Si us plau, llegiu i comprengui totes les instruccions de seguretat abans de la instal·lació i el funcionament. Si no segueix aquestes instruccions, es poden produir descàrregues elèctriques, incendis o lesions greus.
- Risc elèctric: This product operates on AC 100-127V. Ensure all power is disconnected before installation, wiring, or maintenance.
- Personal qualificat: Installation and wiring should only be performed by qualified personnel familiar with electrical systems.
- Cablejat adequat: Assegureu-vos que totes les connexions estiguin segures i aïllades per evitar curtcircuits.
- Ventilació: Assegureu-vos que hi hagi una ventilació adequada al voltant del motor per evitar el sobreescalfament.
- Parts mòbils: Keep hands, clothing, and other objects clear of the rotating shaft during operation.
- Condicions ambientals: Do not expose the motor to excessive moisture, dust, or corrosive environments.
- Advertència de la proposta 65: Aquest producte pot contenir productes químics coneguts per l'estat de Califòrnia per causar càncer i defectes de naixement o altres danys reproductius. Rentar-se les mans després de la manipulació.
3. Especificacions
| Paràmetre | Valor |
|---|---|
| Voltage | AC 100-127V |
| Poder | 4W |
| Manera de Treball | CW/CCW (Clockwise/Counter-Clockwise) |
| Freqüència nominal | 50-60 Hz |
| Velocitat nominal | 1.4-1.7 RPM |
| Torque | 11 kgf.cm |
| Diàmetre del cos | 50 mm / 1.96 polzades |
| Alçada del cos | 20 mm / 0.78 polzades |
| Total Length (including shaft) | 65 mm / 2.55 polzades |
| Diàmetre del forat de muntatge | 4.5 mm / 0.17 polzades |
| Diàmetre de l'eix | 7mm / 0.28 inch (D-Shaft) |
| Longitud de l'eix | 15.5 mm / 0.61 polzades |
| Longitud del cable | 40 cm / 15.7 polzades |
| Material | Metall |
| Número de model | a19082100ux0931 |
Figura 3.1: Dimensional drawing of the uxcell synchronous motor. This image illustrates the motor's body diameter, body height, shaft diameter, shaft length, and mounting hole diameter, providing critical measurements for installation planning.
4. Configuració i instal·lació
Follow these steps for proper installation of the synchronous motor:
- Desconnexió d'alimentació: Ensure the power supply to the equipment is completely disconnected before beginning installation.
- Muntatge: Secure the motor using the two mounting holes on the motor body. Refer to the dimensional drawing in Section 3 for precise measurements. Use appropriate screws and fasteners to ensure a stable and vibration-free mount.
- Connexió de l'eix: Connect the D-shaped shaft to the driven component. Ensure a snug fit to prevent slippage and excessive wear.
- Cablejat: Connect the motor's two wires to the AC 100-127V power supply. The motor is designed for CW/CCW operation, meaning the direction of rotation is determined by the internal mechanism and will alternate upon power cycling. Ensure all electrical connections are insulated and protected. The wire length is approximately 40cm (15.7 inches).
- Verificació: Double-check all connections and mounting points before restoring power.
Figura 4.1: A dalt view of the uxcell synchronous motor. This image shows the motor's D-shaft, which is designed for specific coupling, and the attached blue power wires.
Figura 4.2: En angle view of the uxcell synchronous motor. This perspective highlights the motor's compact body and the secure entry point for the power wires.
5. Instruccions de funcionament
Once properly installed and wired, the motor operates automatically upon receiving power.
- Encès: Apply AC 100-127V power to the motor.
- Direcció de rotació: The motor is designed for CW/CCW (Clockwise/Counter-Clockwise) operation. This means the direction of rotation may vary each time the motor is started. It will rotate in one direction for a period, then reverse.
- Stable Speed: At the rated frequency (50-60Hz), the motor speed remains stable and is not significantly affected by minor voltage fluctuacions.
- Apagar: Disconnect power to stop the motor.
Figura 5.1: posterior view of the uxcell synchronous motor. The label displays key specifications such as voltage (AC 100-127V), frequency (50/60Hz), power (4W), and speed (1.4/1.7 R/min), along with the CW/CCW rotation capability.
6. Manteniment
The uxcell synchronous motor is designed for minimal maintenance. However, periodic checks can help ensure its longevity and optimal performance:
- Mantenir net: Regularly clean the exterior of the motor to prevent dust and debris buildup, which can affect heat dissipation.
- Comproveu les connexions: Inspeccioneu periòdicament les connexions elèctriques per comprovar si estan ben ajustades i si hi ha signes de desgast o corrosió.
- Inspeccionar el muntatge: Ensure the motor remains securely mounted and that there are no loose fasteners.
- Evita la sobrecàrrega: Do not operate the motor beyond its specified torque limits to prevent premature wear.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Motor does not start or rotate. | No power supply. Loose electrical connections. Motor damage. | Check power source. Verify all wiring connections are secure. If power is present and connections are good, the motor may require replacement. |
| Motor makes unusual noise or vibrates excessively. | Loose mounting. Obstruction in rotating parts. Motor damage. | Tighten mounting screws. Inspect for any foreign objects or obstructions. If the issue persists, the motor may be damaged. |
| Motor runs slower than expected. | Overload. Incorrect voltage. | Reduce the load on the motor. Verify the power supply voltage is within the specified AC 100-127V range. |
8. Garantia i Suport
For warranty information, technical support, or service inquiries, please contact uxcell customer service through the retailer where the product was purchased or visit the official uxcell website. Please have your model number (a19082100ux0931) and purchase details available when contacting support.