POPOMAN MTM350B 3D Laser Level User Manual

1. Informació de seguretat

Please read and understand all safety information before operating this laser level. Failure to follow these instructions may result in laser radiation exposure, electric shock, fire, or serious injury.

• Radiació làser: This product emits Class II laser radiation. Do not stare directly into the laser beam. Avoid direct eye exposure.
• Font d'alimentació: Use only the specified charging cable and wall charger. Ensure the power source matches the device's requirements.
• Seguretat de la bateria: The device uses a 5200mAh lithium battery. Do not disassemble, short-circuit, or expose the battery to high temperatures or fire. Dispose of batteries properly.
• Medi ambient: Operate the device in a clean, dry environment. Avoid exposure to water, dust, and extreme temperatures. The device has an IP54 rating for splash and dust resistance, but it is not fully waterproof.
• Nens i animals de companyia: Mantingueu el nivell làser fora de l'abast dels nens i les mascotes.
• Manteniment: No intenteu reparar el dispositiu vosaltres mateixos. Demaneu tot el servei a personal qualificat.

2. Producte acabatview

The POPOMAN MTM350B is a versatile 3D laser level designed for various leveling and alignment tasks. It projects three 360° green laser lines (two vertical, one horizontal) for comprehensive coverage. Its robust design and rechargeable battery make it suitable for both professional and home use.

2.1 Contingut del paquet

• 1 x POPOMAN MTM350B 3D Laser Level
• 1 x cable de càrrega USB-C
• 1 x carregador de paret
• 1 bateria de liti recarregable de 5200 mAh
• 1 x Base pivotant magnètica
• 1 x Auxiliary Supporting Bracket
• 1 x Manual d'usuari
• 1 x Carry Case

Figure 2.1: Complete package contents of the MTM350B laser level.

2.2 Característiques del producte

• 3 línies làser verdes de 360°: Provides one horizontal and two vertical lines for full room coverage.
• Alta visibilitat: Green laser is significantly brighter than red lasers, improving visibility in various lighting conditions.
• Mode d'autonivell: Automatically levels within ±4° ±1° range, indicating out-of-level conditions.
• Mode manual: Locks the pendulum for projecting lines at any angle.
• Mode de pols: Extends working distance up to 197ft (60m) with a laser receiver (not included).
• Llarga vida útil de la bateria: Equipped with a 5200mAh rechargeable lithium battery for up to 8 hours of continuous operation.
• Càrrega USB-C: Convenient charging via USB-C, with overcharge protection.
• Disseny durador: IP54 rated for water and dust resistance, covered by TPR soft rubber for shock protection.
• Muntatge versàtil: Includes magnetic pivoting base and auxiliary supporting bracket, with 1/4''-20 tripod thread.

Figure 2.2: Key features of the POPOMAN MTM350B laser level.

2.3 Identificació de peces

Figure 2.3: Labeled components of the MTM350B laser level.

• Laser ON/OFF Switch: Controls the laser beam activation.
• All-Inclusive Soft Rubber (IP54): Provides durability and protection against dust and splashes.
• Port de càrrega USB: Per connectar el cable de càrrega USB-C.
• Replaceable Battery Compartment: Houses the 5200mAh lithium battery.
• Pendulum Lock: Used to switch between self-leveling and manual modes, and to secure the pendulum during transport.
• 1/4"-20 Screw Hole: For mounting the device on a tripod or other compatible accessories.

3. Configuració

3.1 Desembalatge i inspecció inicial

Carefully remove all components from the carry case. Inspect the laser level and accessories for any signs of damage. Ensure all listed package contents are present.

3.2 Instal·lació i càrrega de la bateria

The MTM350B comes with a 5200mAh rechargeable lithium battery. Before first use, remove the protective film from the battery and fully charge it.

1. Obriu la tapa del compartiment de la bateria que hi ha al lateral del nivell làser.
2. Insert the 5200mAh lithium battery, ensuring correct polarity.
3. Tanqueu bé la tapa del compartiment de la bateria.
4. Connect the USB-C charging cable to the laser level's charging port and the other end to the wall charger.
5. Plug the wall charger into a power outlet. The battery indicator on the device will show charging status.
6. The device can also operate while connected to a power source directly without the battery.

Figure 3.1: The laser level can be charged via car charger, power bank, laptop, or AC adapter.

3.3 Opcions de muntatge

The MTM350B offers flexible mounting solutions for various applications.

• Base pivotant magnètica: Attach the laser level to the magnetic pivoting base using the 1/4"-20 screw hole. This base allows for attachment to metal surfaces and provides rotational adjustment.
• Auxiliary Supporting Bracket: Use this bracket for additional support or to clamp the laser level to various surfaces.
• Muntatge del trípode: The 1/4"-20 screw hole on the bottom of the laser level is compatible with standard tripods (not included).

Figure 3.2: The laser level can be mounted using an adjustable clip, magnetic adsorption, or hang buckle design.

4. Instruccions de funcionament

4.1 Engegada/apagada

To power on the device, slide the pendulum lock switch to the unlocked position. To power off, slide the pendulum lock switch back to the locked position.

4.2 Mode d'autonivellació

When the pendulum lock switch is in the unlocked position, the laser level will automatically self-level. If the device is outside its self-leveling range (±4° ±1°), the laser lines will flash rapidly to indicate an out-of-level condition. Adjust the device's position until the lines stabilize.

4.3 Mode manual (funció de pendent)

To project lines at a specific angle, engage the manual mode:

1. Slide the pendulum lock switch to the locked position.
2. Press and hold the power button for a few seconds until the laser lines activate without self-leveling. The lines will remain static, allowing for angled projection.
3. To exit manual mode, slide the pendulum lock switch to the unlocked position, then back to locked, or power off the device.

4.4 Mode de pols

Pulse mode is used to extend the working range of the laser level when using an optional laser receiver (not included). This is particularly useful for outdoor applications or in bright conditions.

1. Ensure the laser level is in self-leveling mode (pendulum unlocked).
2. Press the 'P' button (Pulse Mode button) on the control panel. The laser lines will begin to pulse, and the pulse mode indicator will light up.
3. Align the laser receiver with the pulsing laser line.
4. To deactivate pulse mode, press the 'P' button again.

4.5 Switching Laser Lines

The MTM350B allows you to activate different combinations of laser lines:

• Press the power button briefly to cycle through the available laser line combinations (e.g., horizontal only, vertical only, all lines).

Figure 4.1: The laser level supports five different line modes for various applications.

4.6 Aplicacions

The 3D laser lines are ideal for a wide range of tasks:

• Instal·lació de terra: Project horizontal lines for accurate tile laying or flooring installation.
• Wall Decoration: Use vertical and horizontal lines for hanging pictures, shelves, or wallpaper.
• Instal·lació al sostre: Project lines onto the ceiling for light fixture placement or ceiling decoration.
• Partició: Create precise layouts for installing partitions, screens, or door panels.

Figura 4.2: Examples of the laser level's use in floor installation, furniture assembly, picture hanging, and tile work.

Figure 4.3: The laser level assists in precise alignment for tasks like wallpapering and staircase renovations.

5. Manteniment

• Neteja: Netegeu regularment les finestres del làser i el cos del dispositiu amb un drap suau i sec.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Emmagatzematge: When not in use, store the laser level in its original carry case in a dry, cool place, away from direct sunlight. Ensure the pendulum lock is engaged before storage or transport.
• Cura de la bateria: Per a l'emmagatzematge a llarg termini, carregueu la bateria aproximadament al 50% i torneu-la a carregar cada 3-6 mesos per mantenir-la en bon estat.
• Calibració: If you suspect the laser level is out of calibration, refer to the troubleshooting section or contact customer support. Do not attempt to recalibrate the internal components yourself.

6. Solució De Problemes

7. Especificacions

8. Garantia i assistència

POPOMAN provides a 2-year quality promise for the MTM350B laser level. For warranty claims, technical support, or any questions regarding your product, please contact POPOMAN customer service through the official weblloc web o la vostra plataforma de compra.

Per obtenir més informació i suport, visiteu: www.popomantools.com