Introducció
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Genesis Nitro 950 Gaming Chair. Please read these instructions carefully before assembly and use to ensure proper function and safety. Keep this manual for future reference.
Informació de seguretat
- Assegureu-vos que tots els components siguin presents i no estiguin danyats abans del muntatge. No utilitzeu el producte si hi falta alguna peça o si està trencada.
- Follow assembly instructions precisely. Incorrect assembly can lead to instability and injury.
- Do not stand on the chair. Use it only for sitting.
- No supereu la capacitat màxima de pes de 150 kg (330 lliures).
- Mantingueu els nens i les mascotes allunyats durant el muntatge. Les peces petites poden ser un perill d'asfíxia.
- Reviseu periòdicament tots els cargols i perns per assegurar-vos que estiguin ben ajustats. Torneu a apretar-los si cal.
- Avoid exposing the chair to direct sunlight or extreme temperatures to prevent material degradation.
Contingut del paquet
Before beginning assembly, verify that all components are included in your package. While specific part names may vary, a typical gaming chair package includes:
- Base del seient
- Respatller
- Reposabraços (2)
- Base estrella
- Rodes (5)
- Cilindre d'elevació de gas
- Gas lift cover
- Placa del mecanisme
- Coixí lumbar
- Coixí reposacaps
- Kit de ferramenta (cargols, volanderes, clau Allen)
Muntatge i muntatge
Assembly is required for this product. Follow these general steps for proper setup. Refer to the included assembly diagram for detailed visual guidance.
- Fixeu les rodes a la base en forma d'estrella: Insert each of the five casters into the holes at the end of the star base arms until they click securely into place.
- Inseriu l'elevador de gas: Col·loqueu el cilindre d'elevació de gas al forat central de la base en forma d'estrella. Cobriu l'elevació de gas amb la coberta telescòpica de plàstic.
- Mount Mechanism Plate: Align the mechanism plate with the screw holes on the underside of the seat base. Ensure the front of the mechanism (usually indicated by a label or the lever side) faces the front of the seat. Secure with screws and washers using the provided Allen key.
- Col·loqueu els recolzabraços: Secure the armrests to the sides of the seat base using the designated screws. Do not overtighten initially to allow for minor adjustments.
- Connect Seat to Backrest: Attach the backrest to the seat base using the side brackets and screws. Ensure proper alignment before tightening all screws firmly.
- Place Seat Assembly onto Gas Lift: Col·loqueu amb cura el seient i el respatller muntats sobre el cilindre d'elevació de gas, assegurant-vos que estigui centrat i estable.
- Enganxar coixins: Position the lumbar cushion and headrest cushion using their straps as desired for ergonomic support.
Instruccions de funcionament
The Genesis Nitro 950 Gaming Chair offers several adjustment features to customize your seating experience.
1. Ajust d'alçada del seient
To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at the desired height to lock it in place.
2. Ajustament de la inclinació del respatller
The backrest can be reclined up to 165 degrees. Locate the recline lever on the right side of the chair, near the seat. Pull the lever up to release the backrest lock, then lean back to the desired angle. Release the lever to lock the backrest in position.
3. Ajust del reposabraços
The armrests are four-way adjustable. Depending on the specific model, adjustments may include height, forward/backward, left/right swivel, and inward/outward angle. Locate the buttons or levers on the armrests to unlock and adjust them. Press or lift the control, move the armrest to the desired position, and release to lock.
4. Rocker and Locking Function (Frog Mechanism)
The chair is equipped with an advanced mechanism that allows for a rocking motion and the ability to lock the chair in any position. To enable rocking, pull out the lever located on the left side, beneath the seat. To disable rocking and lock the chair in an upright or reclined position, push the lever back in.
5. Lumbar and Headrest Cushion Positioning
The ergonomic headrest and lumbar cushion are filled with memory foam for comfort. Adjust their position by sliding them along the straps on the backrest to find optimal support for your neck and lower back.
Manteniment
Regular maintenance helps prolong the life and appearance of your Genesis Nitro 950 Gaming Chair.
- Neteja: Netegeu amb un anunciamp cloth. For ecological leather, use a mild soap solution if necessary, then wipe dry immediately. Avoid abrasive cleaners or solvents.
- Elements de fixació: Periodically check all screws and bolts, especially after initial assembly and every few months, to ensure they remain tight. Retighten as needed to maintain stability.
- Rodes: Keep casters free of hair, dust, and debris to ensure smooth movement.
- Ascensor de gas: Do not attempt to disassemble or repair the gas lift cylinder. It contains pressurized gas.
Resolució de problemes
If you encounter issues with your Genesis Nitro 950 Gaming Chair, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Chair is unstable or wobbly | Loose screws or incorrect assembly | Check and tighten all assembly screws. Ensure the gas lift is fully seated in the star base and mechanism. |
| L'ajust d'alçada del seient no funciona | Gas lift issue or lever mechanism obstruction | Ensure the lever is fully engaged. Check for any obstructions. If the gas lift is faulty, it may need replacement (contact support). |
| El respatller no es reclina ni es bloqueja | Recline lever not engaged or mechanism obstruction | Ensure the recline lever is fully pulled or pushed to engage/disengage the lock. Check for obstructions around the mechanism. |
| Sorolls grinyols | Loose connections or friction between parts | Tighten all screws. Apply a small amount of silicone lubricant to moving parts or connection points if necessary. |
| Les rodes no giren suaument | Debris in casters | Traieu els cabells, la pols o les restes de les rodes giratòries. |
Especificacions
Detailed specifications for the Genesis Nitro 950 Gaming Chair:
| Característica | Detall |
|---|---|
| Marca | Gènesi |
| Nom del model | Nitro 950 |
| Número de model | NFG-1366 |
| Color | Negre |
| Material | Ecological Leather, Memory Foam (fill), Alloy Steel (frame) |
| Dimensions del producte (P x A x A) | 34.25" x 27.95" x 14.37" (87 x 71 x 36.5 cm) |
| Pes de l'article | 28.72 quilograms (aprox. 63.3 lliures) |
| Recomanació de pes màxim | 150 quilograms (aprox. 330 lliures) |
| Angle d'inclinació del respatller | Fins a 165° |
| Tipus de recolzabraços | Four-way adjustable |
| Mecanisme | Advanced rocker and locking function |
| Rodes | Robust large wheels with brakes, plastic-coated for scratch-resistant surfaces |
| Muntatge obligatori | Sí |
| Usos recomanats | Jocs, oficina |
Informació de la garantia
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty coverage typically includes manufacturing defects for a specified period from the date of purchase.
Atenció al client
If you require further assistance, have questions about your product, or need to report a missing or damaged part, please contact the retailer where you purchased the Genesis Nitro 950 Gaming Chair or visit the official Genesis weblloc per obtenir informació de contacte d'assistència.