1. Producte acabatview
This manual provides instructions for the Rough Country 6-inch Lift Kit with N3 Struts, Model 57532, designed for 2011-2013 Ford F-150 4WD vehicles. This kit is engineered to increase ground clearance and allow for the installation of larger tires, while maintaining proper suspension geometry.

Image 1.1: A Ford F-150 equipped with the Rough Country 6-inch Lift Kit.
2. Informació de seguretat i avisos importants
- Instal·lació professional recomanada: Rough Country recommends that a certified technician install lift systems. Knowledge of Rough Country instructions, suspension procedures, and post-installation checks are required. Improper installation may impact the integrity and operating safety of the vehicle.
- Inspecció periòdica: It is the buyer's responsibility to have all bolts and nuts checked for tightness after the first 500 miles of operation, and then again every 1,000 miles thereafter.
- Comprovacions del sistema: Wheel alignment, steering system, suspension, and driveline systems must be inspected by a qualified, professional mechanic at least every 3,000 miles.
- Compatibilitat de vehicles: This kit is specifically designed for 2011-2013 Ford F-150 4WD models.
- Exclusions: This kit does NO fit Raptor models, as they are equipped with a long-travel suspension and Fox Racing Shox. It also does NO fit models equipped with the Heavy Duty Payload Package (seven lug models).
- Modification Requirement: Minor cutting and drilling are required for installation.
- Wheel Recommendation: 9-inch wide wheels are recommended for optimal fitment.
3. Configuració i instal·lació
3.1 Components inclosos
The Rough Country 6-inch Lift Kit (Model 57532) includes the following components:
- (2) N3 Loaded Coil Spring Struts
- (2) N3 Monotube Rear Shock Absorbers
- Lifted Knuckles & Crossmembers
- Sway-Bar & Differential Drop Brackets
- Lift Blocks
- U-Bolts
- Hardware (various fasteners and small parts)
3.2 Passos generals d'instal·lació
Installation of this lift kit requires specialized tools and mechanical expertise. The following is a general overview; always refer to the detailed instructions provided with the physical product for precise, step-by-step guidance.
- Preparació del vehicle: Safely lift and support the vehicle. Remove wheels and existing suspension components as instructed.
- Front Suspension Installation: Install the new lifted knuckles and crossmembers. This step involves minor cutting and drilling. Mount the N3 Loaded Coil Spring Struts. Install sway-bar and differential drop brackets to maintain proper driveline angles.
- Rear Suspension Installation: Install the fabricated rear lift blocks and secure them with the provided U-bolts. Mount the N3 Monotube Rear Shock Absorbers.
- Assemblea final: Reinstall wheels and tires. Ensure all hardware is torqued to manufacturer specifications.
- Comprovacions posteriors a la instal·lació: Perform a thorough inspection of all installed components. A professional wheel alignment is mandatory after installation.

Imatge 3.1: Ex.ample of a heavy-duty crossmember, a key component for maintaining structural integrity.
4. Operating Your Lifted Vehicle
After the Rough Country 6-inch Lift Kit is installed, your Ford F-150 will have increased ground clearance and the ability to accommodate larger tires. While the kit is designed to maintain factory-like angles and ride comfort, it is important to be aware of the changes to your vehicle's dynamics.
- Driving Dynamics: A lifted vehicle may exhibit different handling characteristics compared to a stock vehicle. Exercise caution, especially during turns and at higher speeds.
- Centre de gravetat: The vehicle's center of gravity will be raised, which can affect stability. Drive responsibly and be mindful of this change.
- Rendiment fora de carretera: The kit enhances off-road capability by increasing ground clearance. However, always assess terrain conditions and drive within your vehicle's and your own capabilities.
- Pressió dels pneumàtics: Ensure proper tire pressure for your larger tires as recommended by the tire manufacturer, not necessarily the vehicle's original specifications.
5. Manteniment
Proper maintenance is crucial for the longevity and safe operation of your Rough Country 6-inch Lift Kit and your vehicle.
- Comprovació de fixacions: Re-torque all suspension bolts and nuts after the first 500 miles of driving. Subsequently, check and re-torque every 1,000 miles. This prevents loosening due to settling and vibrations.
- Inspecció de components: Every 3,000 miles, have a qualified mechanic inspect the wheel alignment, steering system, suspension components (struts, shocks, knuckles, crossmembers, brackets), and driveline systems for wear, damage, or proper function.
- Neteja: Regularly clean suspension components, especially after off-road use, to prevent accumulation of dirt, mud, or salt that can lead to corrosion or premature wear.
- Alineació: Periodically check and adjust wheel alignment, especially if you notice uneven tire wear or changes in steering feel.
6. Solució De Problemes
This section addresses common issues that may arise after installing a lift kit. For complex problems, always consult a professional mechanic.
- Alçada de conducció desigual: Ensure all components are installed correctly and fully seated. Verify that the vehicle is on a level surface when measuring. Re-check torque specifications on all fasteners.
- Unusual Noises (Clunking, Squeaking): Inspect all bolts and nuts for proper tightness. Check for any contact between suspension components or between suspension and chassis. Lubricate bushings if necessary.
- Poor Handling or Steering Issues: A professional wheel alignment is critical after installation. If issues persist, check for loose steering components, worn ball joints, or incorrect caster/camber settings.
- Vibracions: Check driveline angles. Ensure U-bolts are properly tightened. Verify tire balance and wheel runout.
- Premature Component Wear: Ensure regular maintenance checks are performed. Over-tightening or under-tightening fasteners can lead to premature wear.
7. Especificacions
| Especificació | Detall |
|---|---|
| Marca | País Aspre |
| Número de model | 57532 |
| Vehicles compatibles | 2011-2013 Ford F-150 4WD |
| Alçada màxima d'elevació | 6 polzades |
| Components inclosos | (2) N3 Loaded Coil Spring Struts, (2) N3 Monotube Rear Shock Absorbers, Lift Blocks, U-Bolts, Hardware, Lifted Knuckles & Crossmembers, Sway-Bar & Differential Drop Brackets |
| Material | Alloy Steel, Aluminum, Rubber, Zinc |
| Pes de l'article | 262 lliures |
| Dimensions del producte | 10 x 10 x 10 inches (packaging/shipping dimensions) |
| Construcció | Perforació necessària: Sí |
| Característiques especials | 9" wide wheels are recommended, Drilling/Cutting Required |
8. Informació de la garantia
The Rough Country 6-inch Lift Kit is backed by a Limited Lifetime Replacement Warranty. This warranty covers manufacturer defects, protecting the product from structural and workmanship damage after the date of purchase. For specific terms, conditions, and claim procedures, please refer to the official Rough Country warranty documentation or contact customer support.
9. Suport
For product inquiries, installation assistance, or technical support, please contact Rough Country directly. Their team provides support for both the product and its installation. Refer to the official Rough Country weblloc web o l'embalatge del producte per obtenir informació de contacte actualitzada.





