WitMotion BLE 5.0 Wireless Bluetooth USB Adapter User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your WitMotion BLE 5.0 Wireless Bluetooth USB Adapter. Please read this manual thoroughly before use to ensure proper functionality and longevity of the device.

Image 1.1: WitMotion BLE 5.0 Wireless Bluetooth USB Adapter.

2. Configuració

2.1 System Requirements and Driver Installation

The WitMotion BLE 5.0 Wireless Bluetooth USB Adapter is compatible with all Windows operating systems. It features a built-in CP2102 chip, enabling plug-and-play functionality for most installations. Drivers should install automatically upon connection.

2.2 Connexió física

1. Localitza un port USB disponible a l'ordinador d'escriptori.
2. Carefully insert the WitMotion BLE 5.0 Wireless Bluetooth USB Adapter into the USB port.
3. Ensure the adapter is securely seated in the port.

2.3 Initial Software Connection

To connect your WitMotion BLE 5.0 sensor (e.g., WT901BLECL/WT901BLE) to the PC software via the adapter, follow these steps:

1. Open the WitMotion PC software on your computer.
2. Ensure the BLE 5.0 USB Adapter is plugged into your computer.
3. Turn on the switch of your WitMotion sensor.
4. Upon successful connection, a blue light on the sensor will remain illuminated.
5. In the PC software, click the "Configuration" button.
6. Observe the indicator at the bottom right of the PC software. A "Green light" indicates the sensor is online and controllable by the software. A "Red light" indicates the sensor is offline.

Video 2.1: Demonstrates the connection process and initial setup with the PC software.

3. Instruccions de funcionament

3.1 Connexió sense fils

The adapter provides a stable wireless connection with a range of up to 30 meters, even through walls, thanks to its built-in antenna. This ensures fast response and minimal delay when communicating with compatible WitMotion BLE 5.0 sensors.

Image 3.1: Diagram illustrating the 30-meter wireless range of the adapter.

Image 3.2: The adapter facilitating wireless connection between a sensor and a laptop displaying data.

3.2 Calibració del sensor

For optimal performance, it is recommended to calibrate your WitMotion sensor after connecting it via the BLE 5.0 adapter.

3.2.1 Calibració de l'acceleració

1. Ensure the sensor is placed on a horizontal, stable surface.
2. In the PC software, navigate to the configuration settings.
3. Click the "Acceleration Calibration" button.
4. Wait for approximately 5 seconds. The X and Y angles displayed in the software should reset to 0.00 degrees, indicating successful calibration.

3.2.2 Calibració del camp magnètic

1. Open the "Configuration" section in the PC software and select the magnetic field calibration option.
2. Physically rotate the sensor around its X, Y, and Z axes. Continue rotating until the software indicates that the calibration is complete.

Refer to Video 2.1 for a visual guide on performing both acceleration and magnetic field calibrations.

4. Manteniment

The WitMotion BLE 5.0 Wireless Bluetooth USB Adapter is designed for durability with anti-dust features. To ensure its longevity and reliable performance:

• Keep the adapter clean and free from dust and debris.
• Guardeu l'adaptador en un lloc fresc i sec quan no l'utilitzeu.
• Eviteu exposar l'adaptador a temperatures o humitat extremes.

5. Solució De Problemes

If you encounter issues with your WitMotion BLE 5.0 Wireless Bluetooth USB Adapter, consider the following troubleshooting steps:

• Adaptador no reconegut: Ensure the adapter is fully and correctly inserted into a functional USB port. Try a different USB port or another computer to rule out port issues.
• Problemes del controlador: Verify that the CP2102 driver is correctly installed. In most cases, it's plug-and-play, but manual installation might be required if automatic installation fails. Check your device manager for any driver conflicts.
• Sensor Connection Failure: Ensure your WitMotion BLE 5.0 sensor is powered on and within the 30-meter operational range of the adapter. Check the sensor's blue light indicator for connection status.
• PC Software Indicator: If the indicator in the PC software shows a "Red light," the sensor is offline. Recheck the sensor's power and proximity. If it shows a "Green light," the sensor is online and should be controllable.
• Interferència: Bluetooth signals can be affected by other wireless devices or physical obstructions. Try to minimize interference sources and ensure a clear line of sight if possible, especially at longer distances.

6. Especificacions

6.1 Product Dimensions and Features

Image 6.1: Detailed dimensions and key features of the adapter.

Image 6.2: Internal hardware components and chip information.

6.2 Especificacions tècniques

7. Garantia i Suport

7.1 Informació de la garantia

The WitMotion BLE 5.0 Wireless Bluetooth USB Adapter comes with a 12 mesos de garantia des de la data de compra.

7.2 Atenció al client

WitMotion is committed to providing lifetime friendly customer service. For any assistance, please refer to the following resources:

• Tutorial Link: A direct link to tutorials is printed on the guiding card included in the product package.
• Recursos en línia: Visita wit-motion.com and navigate to the support page for comprehensive documentation, software downloads, instructions, and applications. You can access the WitMotion Google Drive for additional tutorials.
• Videotutorials: Find and subscribe to the official WitMotion YouTube channel for instructional videos and project experience sharing.
• Contacte directe: For personalized support, you can contact the WitMotion team via email at support@wit-motion.com.