Producte acabatview
The XINJIA Digital Watch is a robust and versatile timepiece designed for daily wear and various activities such as running, cycling, or hiking. It features a high-quality digital movement housed in a durable plastic case with a comfortable silicone strap.
Key features include a clear digital display, backlight function for low-light conditions, stopwatch, and alarm functions. The watch is designed with four intuitive buttons for easy operation and setting adjustments.
Figura 1: Frontal view of the XINJIA Digital Watch. The display shows the time, and the watch face indicates button functions such as LIGHT, MODE, START, and RESET.
Contingut del paquet
- XINJIA Digital Watch (Model: 2400018)
- Pre-installed LR44 battery
- Manual d'usuari (aquest document)
Configuració
Configuració de l'hora inicial
Your XINJIA digital watch comes with a pre-installed battery. Upon first use, you may need to set the current time and date.
- Identifica els botons: The watch has four buttons located around the case. Refer to Figure 2 for button identification.
Figura 2: lateral view showing the four control buttons. These buttons are used for navigating modes and adjusting settings.
- Entra al mode de configuració: Premeu el botó MODE button repeatedly until the time digits begin to flash. This indicates you are in setting mode.
- Ajustar l'hora: Utilitza el COMENÇA or RESET buttons to adjust the flashing digits (hours, minutes, seconds). Press MODE again to cycle through the different time components (e.g., hours, then minutes).
- Estableix la data i el dia: Continueu prement MODE to move to date and day settings. Adjust these using the COMENÇA or RESET botons segons sigui necessari.
- Sortir del mode de configuració: Un cop ajustats tots els paràmetres, premeu el botó MODE button one last time to exit the setting mode and return to the normal time display.
Instruccions de funcionament
Modes de visualització
Premeu el botó MODE button to cycle through the different display modes:
- Visualització de l'hora: Shows current time (hours, minutes, seconds), day of the week, and date.
- Mode d'alarma: Allows setting and activating the alarm.
- Mode de cronòmetre: Per a esdeveniments de cronometratge.
Ús de la llum de fons
Per il·luminar la pantalla en condicions de poca llum, premeu el botó LLUM button. The backlight will remain active for a few seconds.
Utilitzant el cronòmetre
- Premeu el botó MODE button until you reach the Stopwatch mode (usually indicated by "00:00:00" or similar).
- Premeu el botó COMENÇA botó per començar a cronometrar.
- Premeu COMENÇA de nou per pausar el cronòmetre.
- Premeu el botó RESET botó per posar el cronòmetre a zero.
Configuració de l'Alarma
- Premeu el botó MODE botó fins que arribeu al mode d'alarma.
- Premeu el botó COMENÇA or RESET buttons to adjust the alarm time (hours and minutes).
- Premeu MODE to confirm the alarm time and exit the setting.
- To activate or deactivate the alarm, typically a combination of buttons (e.g., COMENÇA i RESET simultaneously in alarm mode, or a dedicated alarm ON/OFF indicator) is used. Refer to the display for an alarm icon.
Manteniment
Neteja
Per netejar el rellotge, netegeu-lo suaument amb un drap suauamp cloth. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the case or strap.
Resistència a l'aigua
Aquest rellotge té una classificació de resistència a l'aigua de 3 BAR (30 metres). This means it is suitable for daily use, splashes, rain, and accidental immersion. It is no apte for showering, bathing, swimming, snorkeling, or any water sports involving high-velocity water or prolonged submersion.
Do not operate the buttons while the watch is wet or submerged, as this can compromise the water resistance.
Canvi de bateria
The watch uses one LR44 battery. When the display becomes dim or the watch stops functioning, it's time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
Figura 3: posterior view of the watch, showing the stainless steel case back. This is where the battery compartment is located.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc o tènue. | Bateria baixa o esgotada. | Substitueix la pila LR44. |
| L'hora és incorrecta. | L'hora no s'ha ajustat correctament o s'ha premut un botó accidentalment. | Refer to the "Initial Time Setting" section to reset the time. |
| Els botons no responen. | Pot ser que el rellotge estigui en mode bloquejat o que hi hagi un problema intern. | Try removing and reinserting the battery (if comfortable). If issue persists, contact support. |
| Condensació dins de la pantalla. | Exposició a canvis extrems de temperatura o resistència a l'aigua compromesa. | Avoid extreme temperature changes. If condensation persists, water resistance may be compromised; seek professional repair. |
Especificacions
- Marca: XINJIA
- Número de model: 2400018
- Moviment: Quars digital
- Material de la caixa: Plàstic
- Diàmetre de la caixa: 46 mm
- Alçada de la caixa: 16 mm
- Material de la corretja: Silicona
- Amplada de la corretja: 29 mm
- Longitud total: 26 cm
- Contraportada: Stainless Steel, secured with four screws
- Resistència a l'aigua: 3 BAR (30 metres)
- Tipus de bateria: 1 x LR44 (inclosa)
- Dimensions del producte: 26 x 4.6 x 1.6 cm
- Pes del producte: 54.43 grams
Garantia i Suport
Specific warranty information for your XINJIA Digital Watch may be provided at the point of purchase or on the manufacturer's official weblloc web. Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.
For technical support or further assistance, please refer to the contact information provided by your retailer or the XINJIA brand's official support channels.