1. Producte acabatview
The Total TWP47506 750W Automatic Jet Water Pump is designed for efficient clean water collection and distribution. It is suitable for drawing water from wells, boreholes, open tanks, and other water supply sources. Primary applications include watering vegetable gardens, personal plots, and ensuring water circulation in fountains and various water features. Its design prioritizes ease of maintenance and portability, featuring an external tank location. The pump incorporates a brushless induction motor for long-lasting, maintenance-free operation. The robust cast iron pump casing can be rotated 90 degrees for flexible installation. This pump is capable of integration into automated water supply systems.
Figura 1: Total TWP47506 750W Automatic Jet Water Pump. This image shows the complete pump unit with its motor and casing.
2. Instruccions de seguretat
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
Seguretat general
- Utilitzeu sempre equips de protecció personal (EPI) adequats, com ara ulleres de seguretat i guants.
- Assegureu-vos que la bomba estigui col·locada sobre una superfície estable i anivellada per evitar que bolqui.
- Mantingueu els nens i les persones no autoritzades allunyats de la zona d'operació.
- Do not operate the pump in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Never use the pump to transfer flammable, corrosive, or explosive liquids.
- Disconnect the power supply before performing any maintenance, cleaning, or when the pump is not in use.
Seguretat elèctrica
- Assegureu-vos que la font d'alimentació voltage matches the specifications on the pump's rating label (220-240V, 50Hz).
- Use a properly grounded outlet. Do not modify the plug.
- Do not expose the pump or electrical connections to rain or wet conditions.
- Avoid using extension cords unless absolutely necessary. If an extension cord is used, ensure it is rated for outdoor use and has the correct gauge for the pump's power requirements.
- Never carry the pump by its power cord.
- Regularly inspect the power cord for damage. If damaged, have it replaced by a qualified electrician.
3. Contingut del paquet
Verifiqueu que tots els elements que s'enumeren a continuació siguin presents i no estiguin danyats en desempaquetar-los:
- 1 x Total TWP47506 750W Automatic Jet Water Pump
- 1 x interruptor de pressió
- 1 x Stainless Steel Hose
- 1 x Manòmetre
- 1 x Three-way Brass Fitting
- Manual d'usuari (aquest document)
4. Especificacions tècniques
| Especificació | Valor |
|---|---|
| Número de model | TWP47506 |
| Tipus | Self-priming Automatic Jet Pump |
| Potència nominal | 750 W (1.0 HP) |
| Voltage | 220-240V |
| Freqüència | 50 Hz |
| Cap Max | 45 metres |
| Flux màxim | 60 litres/minut |
| Succió màxima | 9 metres |
| Diàmetre del tub | 1 x 1 polzada |
| Tipus de motor | Copper Wire Induction Motor (Brushless) |
| Material del rodet | Acer inoxidable |
| Bomba CasinMaterial de g | Ferro colat |
| Longitud del cable | 0.3 metres |
| Tank Capacity (Cylindrical) | 24 litres |
| Dimensions del producte (L x A x A) | 30 x 19 x 22 cm |
| Pes de l'article | 1.5 kg |
| Color | Plata |
5. Configuració i instal·lació
5.1 Col·locació
- Position the pump on a firm, level, and dry surface.
- Assegureu-vos que hi hagi una ventilació adequada al voltant de la bomba per evitar el sobreescalfament.
- Protect the pump from direct exposure to weather elements (rain, direct sunlight, frost).
- Keep the pump as close as possible to the water source to minimize suction lift and maximize efficiency.
5.2 Connexió de canonades
The pump is equipped with standard inch fittings for both suction and discharge pipes.
- Tub de succió: Connect a rigid, airtight suction pipe (1 inch diameter) to the pump's inlet. Ensure all connections are sealed to prevent air leaks, which can affect priming and pump performance. A foot valve with a strainer should be installed at the end of the suction pipe submerged in the water source to prevent debris from entering the pump and to maintain prime.
- Tub de descàrrega: Connect a discharge pipe (1 inch diameter) to the pump's outlet. Use the provided three-way brass fitting, pressure switch, and pressure gauge as part of your water supply system. Ensure all connections are secure.
5.3 Cebament de la bomba
This is a self-priming pump, but initial priming is crucial for proper operation. Before first use or after the pump has run dry:
- Ensure the suction pipe is fully submerged in the water source.
- Locate the priming plug on the top of the pump casing.
- Unscrew the priming plug and slowly fill the pump casinamb aigua neta fins que desbordi.
- Replace and securely tighten the priming plug.
- Open any valves on the discharge side to allow air to escape during startup.
5.4 Connexió elèctrica
- Connect the pump's power cord to a grounded electrical outlet (220-240V, 50Hz).
- Ensure the electrical circuit is protected by a Residual Current Device (RCD) for added safety.
6. Funcionament
6.1 Engegada de la bomba
- Ensure the pump has been properly primed (Section 5.3).
- Verify all pipe connections are secure and leak-free.
- Plug the pump into the power outlet. The pump will start automatically if connected to an automated system with a pressure switch.
- Observe the pressure gauge. The pressure should rise as the pump builds pressure.
- If the pump does not draw water within a few minutes, switch it off, re-prime, and check for air leaks in the suction line.
6.2 Funcionament automàtic
When integrated into a water supply system with the included pressure switch, the pump will automatically start when water pressure drops (e.g., when a tap is opened) and stop when the desired pressure is reached (e.g., when the tap is closed). The 24-liter cylindrical tank helps maintain consistent pressure and reduces pump cycling.
6.3 Parada de la bomba
For temporary shutdown, close all water outlets. The pump will stop automatically if operating in an automated system. For complete shutdown or extended periods of non-use, unplug the pump from the power supply.
7. Manteniment
Regular maintenance ensures optimal performance and extends the lifespan of your pump. Always disconnect the power supply before performing any maintenance.
7.1 Comprovacions periòdiques
- Inspeccioneu el cable d'alimentació i l'endoll per detectar qualsevol signe de dany.
- Check all pipe connections for leaks. Tighten if necessary.
- Ensure the foot valve strainer is clear of debris. Clean if clogged.
- Presteu atenció a sorolls inusuals durant el funcionament, que podrien indicar un problema.
7.2 Neteja
Netegeu l'exterior de la bomba amb un anunciamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the motor's ventilation openings are free from dust and debris.
7.3 Hivernació (per a climes freds)
If the pump is exposed to freezing temperatures, it must be drained to prevent damage:
- Desconnecteu la font d'alimentació.
- Drain all water from the pump casing by unscrewing the drain plug (if present) or by tilting the pump.
- Disconnect the suction and discharge pipes and drain them completely.
- Guardeu la bomba en un lloc sec i sense gelades.
8. Solució De Problemes
Abans de contactar amb l'atenció al client, consulteu la taula següent per obtenir informació sobre problemes i solucions habituals.
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no arrenca | Sense font d'alimentació Cable d'alimentació/endoll defectuós Motor overload protection tripped |
Comproveu la connexió i la presa de corrent Inspeccioneu i substituïu si està danyat Allow motor to cool, then restart. Check for blockages. |
| La bomba funciona però no subministra aigua | Bomba no imprimada Fuga d'aire a la línia d'aspiració Elevació de succió massa alta Foot valve clogged or stuck Font d'aigua buida |
Re-prime the pump (Section 5.3) Check all suction connections for leaks and tighten Relocate pump closer to water source Clean or replace foot valve Ensure adequate water in source |
| Baix flux o pressió | Partial blockage in pipes/impeller Fuga d'aire a la línia d'aspiració Impulsor gastat Incorrect pressure switch setting |
Inspect and clear blockages Check and seal suction connections Poseu-vos en contacte amb personal de servei qualificat Adjust pressure switch according to manufacturer guidelines (if adjustable) |
| Pump cycles on and off frequently | Leak in discharge system Pressure tank pre-charge incorrect Pressostat defectuós |
Check for leaks in pipes, fittings, or fixtures Check and adjust pressure tank air pre-charge Inspect and replace pressure switch if necessary |
9. Garantia i Suport
This Total TWP47506 750W Automatic Jet Water Pump comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, spare parts, or warranty claims, please contact Total customer support through your retailer or visit the official Total website for contact information in your region. When contacting support, please have your model number (TWP47506) and purchase date available.