Tilta Nucleus Nano Wireless Follow Focus Motor Kit Instruction Manual

1. Introducció

This manual provides detailed instructions for the setup, operation, and maintenance of your Tilta Nucleus Nano Wireless Follow Focus Motor Kit. This kit is designed to provide precise wireless focus control for various camera setups, enhancing your filmmaking capabilities.

2. Contingut del paquet

• Tilta Nucleus-Nano Wireless Follow Focus Motor (0.8 mod, 32 pitch, 26-tooth gear)
• 15mm x 100mm Black Aluminum Rod
• Nucleus-Nano Micro USB to Micro USB Nano Motor Power Cable
• Lens gear belt (1)

3. Característiques clau

• Compacte i potent: Motor mounts to a 15mm rod and delivers high torque with low noise.
• Control sense fil: Operates wirelessly from up to 300 feet (approximately 91 meters) away via the Hand Wheel Controller.
• Àmplia compatibilitat: Compatible with most lenses using the motor's 0.8 gear pitch or the included gear rings.
• Opció de connexió amb cable: Allows for power and control via a Tilta Side Focus Handle.
• Integrated Motor Drive: Eliminates the need for a separate Motor Drive Receiver (MDR), simplifying your camera rig.
• Entrada d'alimentació flexible: Supports 5-18V power input via a Micro USB port.
• Opcions de calibratge: Features automatic lens calibration and manual A-B limit setting for lenses without hard end stops.
• Run/Stop Functionality: Provides record Run/Stop control for various camera systems (requires optional cables).

4. Producte acabatview

The image below illustrates the Tilta Nucleus Nano Wireless Follow Focus Motor, highlighting its compact design and key components.

Image: The Tilta Nucleus Nano Wireless Follow Focus Motor, featuring its integrated 0.8 mod gear, 15mm rod clamp, and control buttons.

5. Guia de configuració

5.1. Muntatge del motor

Attach the Nucleus Nano Motor to a 15mm rod using its integrated 15mm rod adapter. Ensure the clamp is securely tightened to prevent movement during operation.

5.2. Powering the Motor

Connect the Nucleus-Nano Micro USB to Micro USB Nano Motor Power Cable to the motor's Micro USB port. Power can be supplied from a compatible source, such as a Tilta G2X tilt motor's 5V Micro USB output or a P-tap to 5V Micro USB cable (sold separately). The motor supports a wide input voltagrang de 5-18V.

5.3. Attaching to Lens

Position the motor's 0.8 mod gear against the focus ring of your camera lens. If your lens does not have standard cinema gears, use the included lens gear belt to create a compatible geared surface. Ensure the motor gear engages smoothly with the lens gear.

5.4. Pairing with Controller

Set the Nucleus Nano Motor and your Tilta Nano Hand Wheel Controller (or other compatible Tilta controllers like Nucleus M FIZ, Hand Grips, or Side Focus Handles) to the same wireless channel. Refer to your specific controller's manual for detailed instructions on channel selection and pairing procedures.

6. Instruccions de funcionament

6.1. Lens Calibration

The motor supports both automatic and manual lens calibration for optimal performance.

• Calibració automàtica: Power on the motor and controller. The motor will attempt to automatically detect the lens's end stops by rotating the focus ring through its full range.
• Manual Calibration (A-B Limits): For lenses without hard end stops, you can set specific A-B limits. Move the lens to your desired 'A' point (e.g., close focus) and activate the 'A' limit function on your controller. Then, move the lens to your desired 'B' point (e.g., infinity) and activate the 'B' limit function. Consult your controller's manual for precise button presses and procedures.

6.2. Control del focus

Once calibrated, use the Hand Wheel Controller to precisely adjust the lens focus. The motor provides smooth and responsive control, allowing for accurate focus pulls.

6.3. Run/Stop Functionality

The Nano Motor can provide record Run/Stop functionality for various camera systems. This feature requires specific cables, sold separately, that connect the motor to your camera's control port. Refer to Tilta's accessory list for compatible cables for your specific camera model.

7. Manteniment

• Keep the motor clean and free from dust, dirt, and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the motor to extreme temperatures, high humidity, or direct water contact.
• Regularly inspect all connections and cables for any signs of wear, fraying, or damage. Replace damaged components immediately.
• Ensure the gears are free of obstructions and operate smoothly. Do not force the motor if resistance is encountered.

8. Solució De Problemes

8.1. Motor Not Responding

• Comproveu la connexió d'alimentació: Ensure the motor is receiving adequate power (5-18V) via the Micro USB port.
• Verifiqueu la integritat del cable: Inspeccioneu el cable d'alimentació per detectar possibles danys o connexions soltes.
• Check Wireless Channel: Confirm that both the motor and its controller are set to the same wireless channel.
• Reemparella els dispositius: Attempt to re-pair the motor with its controller according to the controller's manual.

8.2. Inaccurate Focus or Calibration Issues

• Re-calibrate the Lens: Perform automatic or manual calibration again, ensuring the lens moves freely.
• Check Gear Engagement: Ensure the motor's gear is properly seated against the lens focus ring or gear belt and is not slipping.
• Inspect Lens Gear Belt: If using, ensure the gear belt is securely attached to the lens and is not loose or damaged.

8.3. Motor Noise

• Ensure Proper Mounting: Excessive vibration or loose mounting can contribute to noise. Securely fasten the motor.
• Comproveu si hi ha obstruccions: Make sure nothing is interfering with the motor's movement or gears.

9. Especificacions

10. Garantia i Suport

For detailed warranty information, technical support, and service inquiries, please refer to the official Tilta website or contact their customer service department directly. It is recommended to retain your proof of purchase for any warranty claims.

Online resources, FAQs, and product registration may also be available on the Tilta support page: www.tilta.com/support