GREU 9-18

GREE 24,000 MULTI+ Ultra 23 SEER DUAL Ductless Mini Split System User Manual

Model: 9-18

1. Introducció

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your GREE 24,000 MULTI+ Ultra 23 SEER DUAL Ductless Mini Split System. Please read this manual thoroughly before installing or operating the unit and retain it for future reference. This system is designed to provide comfortable heating and cooling for residential applications.

2. Informació de seguretat

Important: Installation, maintenance, and repair of this equipment must be performed by qualified, certified personnel only. Improper installation or repairs can result in electric shock, fire, or water leakage.

  • Desconnecteu sempre l'alimentació de la unitat abans de realitzar qualsevol manteniment o neteja.
  • Assegureu-vos que la unitat estigui correctament connectada a terra per evitar descàrregues elèctriques.
  • Do not block the air inlet or outlet of the indoor or outdoor units.
  • No introduïu els dits ni objectes a l'entrada/sortida d'aire.
  • If abnormal operation (e.g., burning smell, unusual noise) occurs, immediately turn off the unit and disconnect power. Contact a qualified service technician.
  • The refrigerant used in this system (R-410A) is non-flammable but should only be handled by certified professionals.

3. Producte acabatview

The GREE MULTI+ Ultra system consists of an indoor unit (evaporator), an outdoor unit (condenser), and a wireless remote control. The indoor unit is typically wall-mounted and distributes conditioned air, while the outdoor unit houses the compressor and heat exchanger.

GREE indoor mini-split unit and remote control

Figure 3.1: GREE indoor mini-split unit and remote control. This image displays the white indoor unit of the GREE mini-split system, typically mounted on a wall, alongside its wireless remote control. The remote control features a digital display and various buttons for operating the unit.

GREE outdoor mini-split condenser unit

Figure 3.2: GREE outdoor mini-split condenser unit. This image shows the GREE outdoor condenser unit, which houses the compressor and fan. It is designed for outdoor installation and features a protective grille over the fan.

4. Configuració i instal·lació

The GREE MULTI+ Ultra system requires professional installation. Attempting to install the unit yourself may void the warranty and lead to serious injury or damage. A qualified HVAC technician will perform the following key steps:

  1. Muntatge de la unitat interior: Securely mount the indoor unit on a wall, ensuring proper drainage for condensate.
  2. Col·locació de la unitat exterior: Position the outdoor unit on a stable, level surface with adequate clearance for airflow.
  3. Tuberia de refrigerant: Connect the indoor and outdoor units with refrigerant lines, ensuring proper vacuum and charge.
  4. Cablejat elèctric: Connecteu el cablejat d'alimentació i de comunicació d'acord amb els codis elèctrics locals i el diagrama de cablejat que s'inclou amb la unitat.
  5. Drenatge: Install condensate drain lines to ensure proper water removal from the indoor unit.
  6. Prova del sistema: Perform a comprehensive system test to verify correct operation and detect any leaks.

5. Instruccions de funcionament

Your GREE mini-split system is operated primarily via the wireless remote control. Ensure the remote control has fresh batteries and is pointed towards the indoor unit when sending commands.

5.1. Funcionament bàsic

  • Encès/apagat: Premeu el botó ON/OFF botó per iniciar o aturar la unitat.
  • Selecció del mode: Premeu el botó MODE botó per anar canviant pels modes de funcionament disponibles: AUTO, GENIAL, SEC, FAN, i CALOR.
  • Ajust de temperatura: Utilitza el TEMP UP (▲) i TEMP DOWN (▼) botons per configurar la temperatura desitjada.
  • Velocitat del ventilador: Premeu el botó FAN botó per ajustar la velocitat del ventilador (Automàtic, Baixa, Mitjana, Alta).

5.2. Característiques especials

  • Mode de repòs: Activates a quiet operation mode that gradually adjusts the temperature for comfortable sleep and energy savings. Press the DORMIR botó per activar/desactivar.
  • Funció de temporitzador: Allows you to program the unit to turn on or off automatically at a set time. Refer to the remote control's specific instructions for detailed timer setup.
  • Funcionament silenciós: The system is engineered for reduced vibration and features a programmable sleep mode for near-silent operation.

6. Manteniment

Regular maintenance ensures optimal performance and longevity of your GREE mini-split system. Always disconnect power to the unit before performing any maintenance.

6.1. Neteja del filtre d'aire

Netegeu els filtres d'aire cada dues setmanes o amb més freqüència, depenent de l'ús i la qualitat de l'aire.

  1. Obriu el panell frontal de la unitat interior.
  2. Traieu els filtres d'aire.
  3. Netegeu els filtres amb un aspirador o renteu-los amb aigua tèbia i un detergent suau.
  4. Rinse thoroughly and allow to dry completely in a shaded area before reinstalling.
  5. Torneu a instal·lar els filtres i tanqueu el panell frontal.

6.2. Manteniment de la unitat exterior

Periodically check the outdoor unit for obstructions (leaves, debris) and clean the coil fins with a soft brush or water hose. Ensure proper drainage around the unit. Professional cleaning of the outdoor coil is recommended annually.

6.3. Controls estacionals

  • Before the cooling season, ensure the outdoor unit is clear of debris and the indoor filters are clean.
  • Before the heating season, check for any blockages in the outdoor unit and ensure the system is ready for cold temperatures.

7. Solució De Problemes

Abans de contactar amb el servei tècnic, torneu aview els següents problemes i solucions habituals.

ProblemaCausa possibleSolució
La unitat no començaNo power; remote control batteries dead; circuit breaker tripped.Check power supply; replace batteries; reset circuit breaker.
Refrigeració/calefacció insuficientDirty air filters; blocked outdoor unit; wrong mode selected; temperature setting incorrect.Clean air filters; clear outdoor unit; select correct mode; adjust temperature.
Soroll inusualLoose parts; fan obstruction; refrigerant flow noise (normal).Check for loose parts; remove obstruction; if persistent or loud, contact service.
Fuita d'aigua de la unitat interiorCanonada de desguàs obstruïda; instal·lació incorrecta.Clear drain pipe; contact installer for inspection.
El comandament a distància no funcionaPiles gastades; obstrucció entre el comandament a distància i la unitat.Replace batteries; ensure clear line of sight.

Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb un tècnic de servei qualificat.

8. Especificacions

CaracterísticaEspecificació
MarcaGREE
Nom del modelGREE 24,000 MULTI+ Ultra 23 SEER DUAL
Número de model9-18
Capacitat de refrigeració24,000 British Thermal Units (2 Tons)
Ràtio d'eficiència energètica estacional (SEER)23
Cooling Operating Temperature RangeDe 0 °F a 118 °F
Heating Operating Temperature Range-31 °F a 75 °F
Nivell de soroll56 Decibels (Outdoor Unit)
RefrigerantR-410A
Font d'alimentacióElèctric amb cable
Factor de formaMini-Split
Mètode de controlControl remot
Tipus de compressorRotary Scroll, Rotary Vane
Tipus d'instal·lacióSistema dividit
Unitat exterior requerida
AplicacióResidencial

9. Informació de la garantia

This GREE mini-split system comes with a 5 anys de garantia del fabricant. For specific terms, conditions, and registration details, please refer to the warranty card included with your product or visit the official GREE weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

10. Suport i contacte

For technical assistance, service, or warranty inquiries, please contact your authorized GREE dealer or the professional installer who installed your system. You may also visit the official GREE weblloc web per a recursos de suport i informació de contacte.

GREE Official Weblloc: www.greecomfort.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.