uxcell a19091100ux0717
uxcell Red Indicator Light with Buzzer User Manual
Model: a19091100ux0717
Producte acabatview
The uxcell Red Indicator Light with Buzzer is designed for various electrical control applications. It features a high-brightness red LED and an intermittent buzzer, operating on AC/DC 24V. This unit is suitable for panel mounting with an industrial standard 28mm diameter.
It is commonly used in ship controls, machine tools, general machine equipment, switch cabinets, power distribution cabinets, HVAC panels, and for DIY projects like PLC training.
Figura 1: Frontal view of the uxcell Red Indicator Light with Buzzer.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | a19091100ux0717 |
| Color | Vermell |
| Voltage | AC/DC 24V |
| Diàmetre de muntatge | 28 mm (1-1/10") |
| Diàmetre del cap | 36 mm (1.42") |
| Longitud total | 53 mm (2.09") |
| Fits Panel Thickness | ≤6mm (0.24") |
| Tipus de font de llum | LED |
| Característiques | Flashing Light, Intermittent Buzzer |
| Vida Laboral | >30,000 hores |
| Material | coure |
| Pes de l'article | 0.81 unces |
Figure 2: Detailed dimensions of the indicator light, showing head diameter, mounting hole diameter, and overall length.
Figure 3: Technical drawing illustrating all key dimensions and panel thickness compatibility.
Informació de seguretat
Avís: Desconnecteu sempre l'alimentació abans de la instal·lació o el manteniment per evitar descàrregues elèctriques.
Assegureu-vos el volum adequattage (AC/DC 24V) is supplied to the unit. Incorrect voltage may damage the device or pose a safety hazard.
Do not overtighten the screw terminals during wiring, as this may cause damage to the unit.
Aquest producte conté substàncies químiques que l'estat de Califòrnia sap que causen càncer i defectes congènits o altres danys reproductius (avís de la Proposició 65). Manipuleu-lo amb cura i renteu-vos les mans després de manipular-lo.
Configuració i instal·lació
- Prepara el panell: Drill a 28mm (1-1/10") diameter mounting hole in your control panel. Ensure the panel thickness does not exceed 6mm (0.24").
- Insert Indicator: Insert the indicator light into the prepared hole from the front of the panel.
- Assegurar amb femella: From the back of the panel, thread and tighten the included panel locking nut onto the indicator light to secure it firmly in place.
- Connexions de cable: Connect the AC/DC 24V power supply wires to the screw-clamp terminals at the rear of the indicator light. Ensure connections are firm but do not overtighten the screws.
- Dust Cap (Optional): If desired, install the dust cap over the rear terminals to protect against dust and environmental hazards.
Figura 4: posterior view of the indicator light, showing the screw-clamp terminals for wiring connections.
Figure 5: The removable dust cap designed to protect the rear terminals from dust.
Instruccions de funcionament
Once properly installed and wired, the uxcell Red Indicator Light with Buzzer will activate when the specified AC/DC 24V power is applied to its terminals.
- Indicació lluminosa: The red LED will illuminate and flash when power is supplied, indicating the operational status of the connected circuit or equipment.
- Alarma del timbre: Concurrently with the flashing light, the intermittent buzzer will sound, providing an audible alert.
- Desactivació: The light and buzzer will turn off when the power supply to the unit is disconnected.
Figure 6: The indicator light showing its illuminated state, signifying active operation.
Manteniment
The uxcell Red Indicator Light with Buzzer is designed for long-term, maintenance-free operation with a working life of over 30,000 hours.
- Neteja: Periodically wipe the surface of the indicator light with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Comprovació de la connexió: Occasionally inspect the wiring connections at the rear of the unit to ensure they remain secure. Re-tighten if necessary, but avoid overtightening.
- Tapa antipols: Ensure the dust cap (if installed) is properly seated to protect the terminals from environmental elements.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Light and/or Buzzer not activating. | Sense font d'alimentació. Vol incorrectetage. Connexions de cablejat soltes. Unitat danyada. | Verify power supply (AC/DC 24V) is active. Comproveu el volum d'entradatage coincideix amb les especificacions. Inspeccioneu i assegureu totes les connexions de cablejat. If all else fails, the unit may be faulty and require replacement. |
| Buzzer not sounding, but light is flashing. | Buzzer component failure. | The buzzer component may be damaged. Consider replacing the unit if the audible alarm is critical. |
| La llum és tènue o parpelleja. | Vol insuficienttage. Mala connexió. | Verify stable 24V power supply. Check wiring for loose or corroded connections. |
Garantia i Suport
For warranty information or technical support, please contact uxcell directly through their official channels or the retailer from whom the product was purchased.
Visit the official uxcell store for more products and support: uxcell Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.