Amazon Basics L6LM-N-G

Amazon Basics Fast Charging USB-A to Lightning Nylon Braided Charger Cable User Manual

Model: L6LM-N-G

1. Introducció

This user manual provides essential information for the safe and effective use of your Amazon Basics Fast Charging USB-A to Lightning Nylon Braided Charger Cable. This MFi certified cable is designed for charging and syncing Apple devices with a Lightning port to devices with a USB-A port.

Amazon Basics USB-A to Lightning Nylon Braided Charger Cable

Figure 1: Amazon Basics USB-A to Lightning Nylon Braided Charger Cable.

2. Informació de seguretat

  • Do not expose the cable to liquids or extreme temperatures.
  • Eviteu doblegar o torçar excessivament el cable, especialment a prop dels connectors, per evitar danys.
  • Do not attempt to disassemble or modify the cable.
  • Mantenir fora de l'abast dels nens.
  • Disconnect the cable from power sources when not in use.
  • If the cable shows signs of damage (e.g., fraying, exposed wires), discontinue use immediately.

3. Configuració i connexió

The Amazon Basics USB-A to Lightning cable is designed for simple plug-and-play operation.

  1. Locate a compatible USB-A port on your charging adapter, computer, or other power source.
  2. Insert the USB-A end of the cable (Figura 2a) firmly into the USB-A port.
  3. Locate the Lightning port on your Apple iPhone, iPad, or iPod.
  4. Insert the Lightning end of the cable (Figura 2b) firmly into the Lightning port of your device.
  5. Ensure both connections are secure for proper charging and data transfer.
Close-up of USB-A and Lightning connectors

Figura 2: Primer pla view of the USB-A and Lightning connectors.

Figure 2a: The USB-A connector (left) and Figure 2b: The Lightning connector (right).

Lightning cable plugged into a smartphone

Figure 3: Proper connection of the Lightning cable to a smartphone.

4. Instruccions de funcionament

4.1 Càrrega del dispositiu

Once connected to a power source, the cable will begin charging your Apple device. This cable supports fast charging up to 2.4 amps, allowing for efficient power delivery.

Diagram showing charging times with different adapters

Figure 4: Illustrates charging times using different power adapters. For example, a 5V/2.4A adapter can charge a device to 100% in approximately 155 minutes, while a 5V/1A adapter takes about 175 minutes.

4.2 Transferència de dades

Connect the USB-A end of the cable to a computer's USB-A port and the Lightning end to your Apple device. You can then transfer data such as music, photos, and videos at speeds up to 480 Mbps.

Cable connected to a laptop for data transfer

Figure 5: The cable connected to a laptop, demonstrating its capability for high-speed data transfer.

4.3 Compatibilitat

This cable is MFi certified, ensuring compatibility with a wide range of Apple devices. Refer to the specifications section for a detailed list of compatible models.

Diagram showing diverse compatibility of the cable

Figure 6: Illustrates the diverse compatibility of the cable with various Apple devices (iPhone, iPad, iPod) and power sources (charger, desktop, laptop).

5. Manteniment

  • Clean the cable and connectors periodically with a dry, soft cloth.
  • Avoid pulling the cable by the cord; always grasp the connector when plugging or unplugging.
  • Guardeu el cable en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
  • Do not coil the cable too tightly to prevent internal wire damage.

6. Solució De Problemes

ProblemaCausa possibleSolució
El dispositiu no es carrega.Loose connection, faulty power source, damaged cable, incompatible device.Ensure both ends of the cable are securely connected. Try a different USB-A port or power adapter. Inspect the cable for visible damage. Verify device compatibility.
Càrrega lenta.Low-power USB port, non-fast charging adapter.Use a power adapter that supports 2.4A output. Connect to a high-power USB port (e.g., on a wall charger or dedicated charging port on a computer).
Data transfer issues.Loose connection, driver issues on computer, device not recognized.Reconnect the cable. Restart your computer and Apple device. Ensure your computer's drivers are up to date. Check if your device prompts for "Trust This Computer."
Cable fraying or damage.Desgast, manipulació inadequada.Discontinue use immediately to prevent electrical hazards. Replace the cable.

7. Especificacions

CaracterísticaDetall
MarcaConceptes bàsics d'Amazon
Nom del modelMFi Certified Charger for Apple iPhone - Nylon
Número de modelL6LM-N-G
Tipus de connectorLightning, USB-A
Tipus de cableUSB
Velocitat de transferència de dadesFins a 480 Mbps
Corrent de càrregaFins a 2.4 Amps
Material exteriorTrenat de niló
ColorGris fosc
Longitud3 peus (0.9 metres)
Certificat MFi
Dispositius compatiblesiPhone 14/13/12/11/X/XR/XS/8/7/6/6s/5/5s/5c, iPhone Pro 14/13/12/11, IPhone Pro Max 14/13/12/11/XS, iPhone Plus 14/8/7/6/6s, iPhone SE 1st Gen/2nd Gen/3rd Gen, iPhone mini 13/12, iPad Pro 10.5 in/9.7 in, iPad Air 3/2/1, iPad mini 5/4/3/2/1, iPad 9th Gen and older, iPod Touch 5th Gen and older, iPod nano 7th Gen and Beats Pill+

8. Garantia i Suport

Per obtenir informació sobre la garantia i l'atenció al client, consulteu els conceptes bàsics oficials d'Amazon. weblloc web o contacteu amb el servei d'atenció al client d'Amazon.

  • Oficial Weblloc: amazon.com/AmazonBasics
  • Document de garantia: A PDF document for warranty information may be available for download. Please check the product page on Amazon.com for the latest version.
  • Atenció al client: For direct assistance, please visit the Amazon customer service portal.
Conceptes bàsics d'Amazon website address on product packaging

Figure 7: Product packaging displaying the Amazon Basics website address for support and information.

© 2025 Amazon Basics. Tots els drets reservats.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.