Vissani QR254S

Manual d'instruccions de la campana extractora Vissani per a sota l'armari de 30"

Model: QR254S

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Vissani Under Cabinet Range Hood. Please read thoroughly before use to ensure safe and efficient operation of the appliance.

Instruccions importants de seguretat

Per reduir el risc d'incendi, descàrrega elèctrica o lesions a les persones, observeu el següent:

  • Install this range hood in accordance with all specified instructions.
  • Desconnecteu sempre l'alimentació abans de fer el manteniment o la neteja de la unitat.
  • No feu funcionar cap ventilador amb un cable o un endoll danyats. Descarteu el ventilador o torneu-lo a un centre de servei autoritzat per a l'examen i/o reparació.
  • Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back-drafting. Follow the heating equipment manufacturer's guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
  • Quan talleu o perforeu la paret o el sostre, no danyeu el cablejat elèctric i altres serveis ocults.
  • Els ventiladors per conductes s'han de ventilar sempre a l'exterior.
  • Netegeu els filtres de greix amb freqüència. No s'ha de permetre que s'acumuli greix al ventilador ni al filtre.
  • Use proper size wiring and always use a dedicated circuit.
  • Aquesta unitat ha d'estar connectada a terra.

Contingut del paquet

Verify that all components are present and in good condition before beginning installation.

  • Vissani Under Cabinet Range Hood Unit
  • Charcoal Filter (included for ductless operation)
  • Maquinari de muntatge (cargols, ancoratges)
  • Duct Connector (for ducted installation)
  • Manual d'usuari
Components included with the Vissani range hood.

Components included with the Vissani range hood, showing filters, duct connector, and mounting hardware.

Configuració i instal·lació

The Vissani Under Cabinet Range Hood can be installed as either ducted (vented to the outside) or ductless (recirculating with charcoal filters).

Llista de verificació prèvia a la instal·lació

  • Ensure the cabinet measurements are appropriate for a 30-inch range hood.
  • Verify electrical supply is available and meets specifications.
  • For ducted installation, ensure proper ductwork is in place.
  • For ductless installation, ensure charcoal filters are installed.

Muntatge de la campana extractora

  1. Carefully measure and mark the mounting points under the cabinet.
  2. Perforar forats pilot per als cargols de muntatge.
  3. Lift the range hood into position and secure it with the provided screws.
  4. Connect the electrical wiring according to local codes and the wiring diagram in the manual.
  5. If installing as ducted, connect the ductwork to the top exhaust port. If ductless, ensure the charcoal filter is properly seated.
Davant view of the Vissani Under Cabinet Range Hood installed.

Davant view of the Vissani Under Cabinet Range Hood installed under a kitchen cabinet.

lateral view of the Vissani Under Cabinet Range Hood.

lateral view of the Vissani Under Cabinet Range Hood, showcasing its sleek stainless steel design.

Operating Your Range Hood

The Vissani range hood features intuitive push-button controls for easy operation of its lighting and fan functions.

Tauler de control

The control panel is located on the front of the range hood and consists of five push buttons:

  • Botó de llum: Toggles the LED lights on/off.
  • Velocitat del ventilador 1: Activates the fan at low speed.
  • Velocitat del ventilador 2: Activates the fan at medium speed.
  • Velocitat del ventilador 3: Activates the fan at high speed.
  • Botó apagat: Apaga el ventilador.
Close-up of the control panel with push buttons for light and fan speed.

Primer pla view of the range hood's control panel, showing the push buttons for light and fan speed settings.

Operació lleugera

Press the light button (indicated by a light bulb icon) to turn the LED lights on or off. The lights illuminate your cooking surface effectively.

Control de velocitat del ventilador

Select the desired fan speed (1, 2, or 3) based on your cooking needs. Speed 1 is for light ventilation, while Speed 3 provides maximum extraction for heavy cooking fumes. Press the 'Off' button to turn the fan off.

Manteniment i cura

Un manteniment regular garanteix un rendiment òptim i una llarga vida útil de la campana extractora.

Neteja dels filtres

The mesh filters should be cleaned regularly to prevent grease buildup. To remove, locate the latch on each filter, push it in, and pull the filter down. Clean with warm, soapy water or in a dishwasher. Ensure filters are completely dry before re-installing.

Close-up of the mesh filter.

Primer pla view of the mesh filter, designed to trap grease and odors.

Hand demonstrating removal of the mesh filter.

A hand demonstrating the simple process of removing the mesh filter for cleaning.

Substitució del filtre de carbó

For ductless (recirculating) installations, the charcoal filter traps odors and should be replaced every 3-6 months depending on usage. Refer to the filter's specific instructions for replacement.

Charcoal filter component.

The charcoal filter, essential for odor removal in ductless configurations.

Substitució de bombetes

The range hood uses GU10 LED bulbs (max 5W). To replace, ensure power is off, then carefully twist and pull out the old bulb. Insert the new bulb by aligning the pins and twisting to secure.

Close-up of the LED light fixture.

Close-up of the LED light fixture, showing the GU10 bulb type.

Hand pointing to the light fixture and filter latch.

A hand indicating the location of the light fixture and the filter release latch.

Guia de resolució de problemes

Refer to this guide for common issues and their solutions.

ProblemaCausa possibleSolució
El ventilador no funcionaNo power supply; Fan switch off; Motor malfunction.Check circuit breaker/fuse; Ensure fan switch is on; Contact customer support if motor is faulty.
Els llums no funcionenLight switch off; Bulb loose or burnt out; Wiring issue.Ensure light switch is on; Tighten or replace bulb; Check wiring connections.
Succió insuficientGrease filters clogged; Charcoal filters saturated (ductless); Improper installation; Obstruction in ductwork.Clean or replace filters; Verify proper installation and sealing; Check for duct obstructions.
Soroll excessiuLoose parts; Fan motor imbalance; Obstruction in fan blades.Check for loose screws or components; Inspect fan blades for debris; Contact customer support if motor is imbalanced.

Especificacions del producte

CaracterísticaEspecificació
MarcaVissani
Informació del modelQR254S
Dimensions del producte18 "P x 29.8" W x 5" H
Pes de l'article22.6 lliures
MaterialAcer inoxidable
Tipus d'acabatRaspallat
ColorAcer inoxidable
Capacitat de cabal d'aire320 peus cúbics per minut
Nivell de soroll1.5 sons
Tipus de muntatgeSota el muntatge del gabinet
Components inclososFiltre de carbó
Tipus de controlsPulsador
Tipus de font de llumLED
Wattage1E+1 (10W)
Tipus de filtreMalla
Tipus de ventilació[BOTH] (Ducted/Ductless)
UPC056677874543

Garantia i assistència al client

For warranty information or technical assistance, please contact Vissani customer support. Keep your purchase receipt for warranty claims.

La informació de contacte normalment es pot trobar a la pàgina oficial del fabricant weblloc web o a l'embalatge del producte.

© 2024 Vissani. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.