1. Introducció
This manual provides essential information for the safe and effective installation, operation, and maintenance of the XP POWER HPU1K5PS48 AC-DC Power Supply. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.
2. Informació de seguretat
ADVERTIMENT: Risk of electric shock. This unit contains hazardous voltages. Only qualified personnel should perform installation and servicing.
- Ensure the power supply is disconnected from the AC mains before any installation, wiring, or maintenance procedures.
- Comproveu que l'entrada voltage range (85-264VAC) matches the local mains supply.
- Proper grounding is essential to prevent electric shock. Connect the protective earth terminal to a reliable ground.
- Do not operate the unit in environments with excessive moisture, dust, or corrosive gases.
- Assegureu-vos que hi hagi una ventilació adequada al voltant de la font d'alimentació per evitar el sobreescalfament.
- No obriu la font d'alimentació casing. No hi ha peces que l'usuari pugui reparar a l'interior.
3. Producte acabatview
The XP POWER HPU1K5PS48 is a high-power, enclosed AC-DC power supply designed for panel mounting. It provides a regulated 48V DC output with an auxiliary 5V 1A output. Key features include:
- Entrada Voltage: 85-264VAC
- Sortida principal: 48V DC, 25A (for <180VAC input) / 31A (for >180VAC input)
- Sortida auxiliar: 5V CC, 1A
- Potència total: 1493W
- Factor de forma: Enclosed, Panel Mount
- Vol. de sortida ajustabletage
4. Configuració
4.1. Desembalatge i inspecció
Carefully unpack the power supply and inspect it for any signs of physical damage. If damage is found, do not proceed with installation and contact your supplier.
4.2. Muntatge
The HPU1K5PS48 is designed for panel mounting. Ensure the mounting surface is stable and capable of supporting the unit's weight. Maintain adequate clearance around the unit for proper airflow and heat dissipation. Refer to the product datasheet for specific mounting dimensions and recommended clearances.
4.3. Connexions de cablejat
All wiring should be performed by qualified personnel in accordance with local electrical codes and regulations. Use appropriate gauge wiring for the input and output currents.
- Entrada de CA: Connect the AC mains supply to the designated input terminals (L, N, PE). Ensure correct polarity and a secure protective earth connection.
- Sortida de corrent continu: Connect the load to the DC output terminals (+V, -V). Observe correct polarity.
- Sortida auxiliar: If required, connect the auxiliary load to the 5V 1A output terminals.
- Remote Sense (if applicable): For applications requiring precise voltage regulation at the load, connect the remote sense terminals (+S, -S) to the load's positive and negative terminals, respectively. Ensure sense lines are twisted and shielded if necessary.
- Remote On/Off (if applicable): Connect remote control signals to the designated terminals as per the product datasheet.
4.4. Vol. De sortidatage Ajust
La sortida principal voltage can be adjusted using the potentiometer located on the unit. Use a non-conductive tool to carefully turn the potentiometer to achieve the desired output voltage within the specified adjustment range. Monitor the output voltage amb un multímetre durant l'ajust.
5. Instruccions de funcionament
After completing the setup and verifying all connections, the power supply is ready for operation.
- Encès: Apply AC mains power to the unit. The power supply should initiate and provide the regulated DC output voltage.
- Connexió de càrrega: Connect the load to the DC output. Ensure the load current does not exceed the maximum rated output current of the power supply.
- Seguiment: Controleu periòdicament el volum de sortidatage and current to ensure stable operation.
- Apagar: To shut down the unit, disconnect the AC mains power.
6. Manteniment
The XP POWER HPU1K5PS48 power supply is designed for reliable operation with minimal maintenance. However, periodic inspection is recommended.
- Neteja: Ensure the ventilation openings are free from dust and debris. If cleaning is necessary, disconnect the unit from the AC mains and use a soft, dry cloth. Do not use liquid cleaners.
- Connexions: Periodically check all input and output connections for tightness and signs of corrosion.
- Condicions ambientals: Assegureu-vos que l'entorn de funcionament es mantingui dins dels rangs de temperatura i humitat especificats.
Nota: There are no user-serviceable parts inside the power supply. Any internal servicing must be performed by XP POWER authorized service personnel.
7. Solució De Problemes
If the power supply is not operating as expected, perform the following basic checks:
| Símptoma | Causa possible | Acció |
|---|---|---|
| Sense sortida voltage | Sense alimentació d'entrada de CA Input fuse blown Falla interna |
Check AC mains connection Check input fuse (if accessible and user-replaceable) Contacteu amb l'assistència tècnica |
| Volum de sortidatagmassa baix/alt | Vol incorrectetage ajust Condició de sobrecàrrega Faulty remote sense connection |
Ajustar el volum de sortidatage potenciòmetre Reduir el corrent de càrrega Check remote sense wiring |
| Unit shuts down unexpectedly | Protecció de sobrecàrrega activada Over-temperature protection triggered |
Reduir el corrent de càrrega Ensure adequate ventilation; check ambient temperature |
If the problem persists after performing these checks, contact XP POWER technical support.
8. Especificacions
| Paràmetre | Valor |
|---|---|
| Model | HPU1K5PS48 |
| Marca | POTÈNCIA XP |
| Entrada Voltage Rang | 85-264VAC |
| Sortida principal Voltage | 48V DC (Adjustable) |
| Main Output Current | 25A (<180VAC input) / 31A (>180VAC input) |
| Sortida auxiliar | 5V CC, 1A |
| Potència de sortidatage | 1493 watts |
| Factor de forma | Enclosed, Panel Mount |
| UPC / GTIN | 723707441647 |
9. Garantia i Suport
For warranty information, technical support, or service inquiries, please contact XP POWER directly or your authorized distributor. Refer to the official XP POWER weblloc web per obtenir les dades de contacte i els termes de garantia més actualitzats.
XP POWER Contact Information: www.xppower.com/contact
