1. Introducció
This manual provides instructions for the assembly, operation, and maintenance of your new addlon Floor Lamp, Model gjynf-832. This lamp is designed to provide adjustable lighting with three distinct color temperatures, suitable for various indoor environments such as living rooms, bedrooms, and offices. Please read this manual thoroughly before installation and use to ensure safe and proper operation.
Image 1.1: The addlon Floor Lamp in a typical room setting.
2. Instruccions de seguretat
- Assegureu-vos que lamp is unplugged from the power outlet before assembly, cleaning, or bulb replacement.
- No feu funcionar lamp with a damaged cord or plug. If the cord or plug is damaged, contact customer support.
- Aquesta lamp is intended for indoor use only. Do not expose to water or high humidity.
- Use only the specified bulb type (E26 base, 9W LED bulb included). Do not exceed the maximum wattage.
- Mantingueu la lamp lluny de materials inflamables.
- Assegureu-vos que la base estigui estable sobre una superfície plana per evitar que bolqui.
- No intenteu modificar o desmuntar el lamp beyond the instructions provided in this manual.
3. Contingut del paquet
Carefully unpack all components and inspect for any damage. If any parts are missing or damaged, please contact addlon customer support.
- Lamp Base
- Lamp Seccions de pal (normalment 3-4 seccions)
- Lamp Head with Curved Arm
- Lli Lampshade (rolled)
- 9W LED Bulb (E26 base)
- Manual d'usuari
Imatge 3.1: Tots els components inclosos al paquet.
4. Muntatge i muntatge
Assembly typically takes approximately 15 minutes and can be completed by one person. Follow these steps:
- Enganxeu la base: Screw the lowest pole section into the lamp base clockwise until secure.
- Muntar el pal: Connect the remaining pole sections by screwing them clockwise. Ensure each section is tightly connected to prevent wobbling.
- Adjunta la Lamp Cap: Cargol la lamp head with the curved arm onto the top pole section.
- Muntar la Lampombra: El lli lampshade arrives rolled. Unroll it and connect the two vertical edges using the integrated hook-and-loop fastener strip. Place the assembled lampombra a lamp head, ensuring it sits securely.
- Instal·leu la bombeta LED: Carefully screw the provided 9W LED bulb into the E26 socket on the lamp head. Do not overtighten.
Image 4.1: Visual guide for lamp muntatge.
5. Instruccions de funcionament
The addlon Floor Lamp features a convenient foot switch and offers three color temperature settings.
5.1 Power On/Off and Color Temperature Selection
Connecteu la lamp into a standard 110V AC power outlet. The lamp is operated by a foot switch located on the power cord.
- Primera premsa: Gira la lamp ON to Warm White (3000K).
- Segona premsa: Changes the light to Cool White (4500K).
- Tercera premsa: Changes the light to Daylight (6500K).
- Quarta premsa: Gira la lamp OFF.
El lamp cycles through these settings with each press of the foot switch.
Image 5.1: The three available color temperatures.
5.2 L ajustableamp Cap
El lamp head is designed with an adjustable angle, allowing you to direct the light as needed. Gently pivot the lamp head to achieve the desired illumination direction. The lamp head can be adjusted up to 270 degrees horizontally and 90 degrees vertically.
Imatge 5.2: Lamp head adjustability.
6. Manteniment
6.1 Neteja
Abans de netejar, assegureu-vos que lamp is unplugged. Use a soft, dry cloth to wipe down the lamp pole and base. For the linen lampshade, a lint roller or a soft brush can be used to remove dust. Avoid using abrasive cleaners or solvents, as these can damage the finish or fabric.
6.2 Substitució de la bombeta
Assegureu-vos que lamp is unplugged and the bulb has cooled down before attempting to replace it. Unscrew the old bulb counter-clockwise and screw in a new E26 base LED bulb. It is recommended to use an LED bulb of similar wattage (9W) to maintain optimal performance and energy efficiency.
7. Solució De Problemes
- Lamp no s'encén:
- Check if the power cord is securely plugged into the wall outlet.
- Assegureu-vos que la presa de corrent de la paret funciona provant-la amb un altre dispositiu.
- Verify the bulb is screwed in correctly and is not burnt out. Replace if necessary.
- Parpelleig de llum:
- Assegureu-vos que la bombeta estigui ben cargolada.
- Try a different bulb to rule out a faulty bulb.
- Lamp is unstable:
- Ensure all pole sections are screwed together tightly.
- Col·loca la lamp sobre una superfície plana i plana.
8. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | gjynf-832 |
| Dimensions (A x A x P) | 64 cm d'alçada x 17 cm d'amplada x 11 cm de profunditat |
| Pes de l'article | 10.36 lliures |
| Tipus de bombeta | LED (inclòs) |
| Base del bulb | E26 |
| Wattage | 9 watts |
| Temperatures de color | 3000K (Warm White), 4500K (Cool White), 6500K (Daylight) |
| Material d'ombra | Lli |
| Material base | Brass or brass-like metal |
| Tipus de canvi | Interruptor de peu |
| Font d'alimentació | Elèctric amb cable |
| Voltage | 110 Volts |
| Ús interior/exterior | Interior |
Imatge 8.1: Dimensions del producte.
9. Garantia i Suport
addlon proudly stands behind its products with a Suport de qualitat durant 2 anys. If you encounter any issues or have questions regarding your addlon Floor Lamp, please contact our customer support team. We are committed to providing assistance and ensuring your satisfaction.
For support, please refer to the contact information provided on the product packaging or the official addlon weblloc.