Homra HOM20254

Homra Nexo 72L Sensor Waste Separation System

Model: HOM20254

1. Producte acabatview

The Homra Nexo 72L Sensor Waste Separation System is designed for efficient waste management with its multi-compartment structure and automatic sensor lid. This manual provides essential information for the proper setup, operation, and maintenance of your waste separation system.

Homra Nexo 72L Sensor Waste Separation System with lid open and lower drawer pulled out, showing a green inner bin.

Image 1.1: Homra Nexo 72L Waste Separation System

2. Instruccions de configuració

2.1 Desembalatge i inspecció

  • Traieu amb cura tots els components de l'embalatge.
  • Verify that all parts are present and undamaged. Refer to the packing list for a complete inventory.

2.2 Instal·lació de la bateria

The sensor lid requires 6 AA batteries for operation. Ensure correct polarity when inserting the batteries.

  1. Localitzeu el compartiment de la bateria a la part inferior de la tapa.
  2. Obriu la tapa del compartiment de la bateria.
  3. Insert 6 AA batteries, observing the polarity markings (+/-).
  4. Tanqueu bé la tapa del compartiment de la bateria.

2.3 Col·locació

Position the waste separation system on a flat, stable surface. The unit is suitable for various indoor environments such as kitchens, living rooms, or offices.

Homra Nexo waste bin in a room, showing its anti-slip feet.

Image 2.1: Anti-slip feet ensure stability

3. Instruccions de funcionament

3.1 Sensor Lid Operation (Upper Compartment)

The large upper compartment features an automatic sensor lid for hygienic, touch-free operation.

  1. To open the lid, place your hand approximately 10-15 cm above the sensor located on the front of the lid.
  2. La tapa s'obrirà automàticament.
  3. After a few seconds of inactivity, the lid will close automatically.
  4. For manual control, use the 'OPEN' and 'CLOSE' buttons next to the sensor. Press 'OPEN' to keep the lid open, and 'CLOSE' to close it.
Close-up of the Homra Nexo sensor lid with 'OPEN' and 'CLOSE' buttons.

Image 3.1: Sensor and manual control buttons

Person demonstrating the use of the sensor lid on the Homra Nexo waste bin.

Image 3.2: Hands-free sensor operation

3.2 Lower Compartment Operation

The lower compartment can be opened manually by pulling the drawer handle. It is equipped with wheels for smooth operation.

3.3 Waste Separation

The system is designed for efficient waste separation with multiple compartments:

  • Upper Compartment (48 Litres): Ideal for general waste or recyclables. An inner ring secures the garbage bag in place. A 4-litre collection tray for green waste can be used here.
  • Lower Compartment (2 x 12 Litres): Contains two separate inner containers, suitable for different types of recyclables such as plastic, paper, or glass. These containers are designed for standard 15-litre rubbish bags.
Homra Nexo waste bin with the lower drawer open, showing two inner bins and a removable upper bin.

Image 3.3: Multi-compartment design for waste separation

Close-up of the Homra Nexo lid, highlighting its soft-close mechanism.

Image 3.4: Soft-close lid mechanism

4. Manteniment

4.1 Neteja

The Homra Nexo is made from dirt-repellent and fingerprint-proof stainless steel, making it easy to clean.

  • Netegeu l'exterior amb un suau, damp drap i detergent suau.
  • Eviteu netejadors abrasius o productes químics agressius, ja que poden danyar l'acabat.
  • The inner bins can be removed and washed with soap and water. Ensure they are completely dry before placing them back into the unit.
Person crouching next to the Homra Nexo waste bin, highlighting its fingerprint-free stainless steel surface.

Image 4.1: Fingerprint-free stainless steel finish

4.2 Substitució de la bateria

If the sensor lid becomes unresponsive or slow, it may be time to replace the batteries. Follow the steps in Section 2.2 for battery installation.

5. Solució De Problemes

  • Lid not opening/closing automatically:
    • Comproveu si les piles estan correctament instal·lades i tenen prou energia. Canvieu les piles si cal.
    • Ensure there are no obstructions blocking the sensor or the lid's movement.
    • Clean the sensor area to remove any dust or debris.
  • Lid making unusual noises:
    • Ensure the lid mechanism is clean and free from debris.
    • Do not force the lid open or closed manually when the sensor is active.
  • Lower drawer not sliding smoothly:
    • Check for any debris or obstructions under the wheels.
    • Assegureu-vos que la unitat estigui en una superfície plana.

6. Especificacions

MarcaHomra
Número de modelHOM20254
Capacitat72 Litres (1 x 48L, 2 x 12L)
Dimensions del producte42 x 31.5 x 110 cm (A x P x A)
Pes8.8 kg
MaterialAcer inoxidable
Mecanisme d'oberturaSensor de moviment
Piles necessàries6 piles AA
Diagram showing the dimensions of the Homra Nexo waste bin: 42cm width, 31.5cm depth, 83cm height for the main body, and internal capacities of 40L, 8L, 12L, 12L.

Imatge 6.1: Dimensions i capacitats del producte

7. Garantia i Suport

For warranty information or technical support, please contact the manufacturer, Homra, or your retailer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.