ASHATA 2x2 Video Wall Controller Instruction Manual

1. Introducció

The ASHATA 2x2 Video Wall Controller is a device designed to split a single HDMI high-definition image into multiple segments for display across several screens, creating a larger video wall. This controller supports one HDMI input and four HDMI outputs, enabling various display configurations such as 2x2, 2x1, 3x1, 4x1, 1x2, 1x3, and 1x4.

This manual provides detailed instructions for the proper setup, operation, and maintenance of your video wall controller to ensure optimal performance and longevity.

Image: The ASHATA 2x2 Video Wall Controller shown with a 2x2 display configuration.

2. Informació de seguretat

• Llegiu atentament totes les instruccions abans d'utilitzar el dispositiu.
• No exposeu el dispositiu a l'aigua, la humitat ni a temperatures extremes.
• Use only the provided power adapter. Using an incorrect power supply may damage the device and void the warranty.
• No intenteu obrir ni reparar el dispositiu. Encarregueu totes les tasques de manteniment a personal qualificat.
• Assegureu-vos una ventilació adequada al voltant del dispositiu per evitar el sobreescalfament.

3. Contingut del paquet

Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:

• 1 x ASHATA 2x2 Video Wall Controller
• 1 x comandament a distància
• 1 x adaptador d’alimentació de 12V
• 1 x Manual d'usuari (aquest document)

Image: The video wall controller, remote control, and power adapter included in the package.

4. Característiques del producte

• 2x2 Video Wall Splicing: Divides a single HDMI input into four segments for display across four screens.
• Múltiples modes d'empalmament: Supports 2x2, 2x1, 3x1, 4x1, 1x2, 1x3, and 1x4 configurations.
• Suport d'alta definició: Compatible with HDMI 1.3 input, supporting resolutions up to 1920 x 1080P at 60Hz output.
• Construcció duradora: Made of metal material for anti-interference, efficient heat dissipation, and extended service life.
• Plug and Play: Easy to set up and operate without complex software installation.
• Rendiment estable: Powered by 12V with over-current protection.
• Gold-Plated Interfaces: Reduces data loss and improves signal efficiency.

5. Dispositiu acabatview

Panell frontal

• Receptor IR: Per a senyals de comandament a distància.
• Indicador LED: Indicates power and operational status.
• Botó d'àudio: Controls audio output.
• Botó de mode: Cycles through different splicing modes.

Panell posterior

Imatge: Part posterior view of the controller with input and output ports.

• Entrada HDMI: Connect your source device (e.g., computer, media player).
• Sortides HDMI (1-4): Connect to your display units (TVs, monitors).
• CC 12V: Port d'entrada d'alimentació.

6. Funcions de control remot

The included remote control allows for convenient operation of the video wall controller.

Image: The remote control for the video wall controller.

• POTÈNCIA: Encén o apaga el dispositiu.
• ÀUDIO: Toggles audio output.
• ATTR++ / ATTR--: Adjusts image attributes (e.g., brightness, contrast).
• VAL++ / VAL--: Adjusts value for selected attribute.
• R: Rotates the image (if supported by the specific mode).
• RESET: Restableix la configuració per defecte.
• 2X2, 2X1, 1X2, 1X1: Direct buttons to select specific splicing modes. Other modes (3x1, 4x1, 1x3, 1x4) can be accessed via the 'Mode' button on the device or cycling through options.

7. Instruccions de configuració

1. Prepare Displays: Arrange your display units (TVs, monitors) in the desired configuration (e.g., 2x2, 1x4). Ensure all displays are powered off.
2. Connecteu les sortides HDMI: Connect HDMI cables from the HDMI Output ports (1-4) on the video wall controller to the HDMI Input ports on your display units. Match the outputs to the physical arrangement of your screens.
3. Connecteu l'entrada HDMI: Connect an HDMI cable from your source device (e.g., PC, Blu-ray player) to the HDMI Input port on the video wall controller.
4. Connectar l'alimentació: Plug the 12V power adapter into the DC 12V port on the controller, then plug the adapter into a power outlet.
5. Encès: Power on the video wall controller, then power on all connected display units.
6. Seleccioneu l'entrada: Ensure your display units are set to the correct HDMI input source.

8. Instruccions de funcionament

The video wall controller supports various splicing modes. You can select these modes using the remote control or the 'Mode' button on the device.

Selecting Splicing Modes:

• Ús del control remot: Press the dedicated buttons (2X2, 2X1, 1X2, 1X1) for quick selection of common modes. For other modes, you may need to cycle through options using a mode selection button if available, or refer to specific remote functions for advanced configurations.
• Using Device Buttons: Press the 'Mode' button on the front panel of the controller to cycle through available splicing configurations.

The controller will automatically adjust the image to fit the selected display configuration.

Imatge: Visual examples of different video wall splicing modes.

9. Manteniment

• Neteja: Use a soft, dry cloth to clean the surface of the device. Do not use liquid or aerosol cleaners.
• Ventilació: Assegureu-vos que les obertures de ventilació no estiguin bloquejades per evitar el sobreescalfament.
• Emmagatzematge: Quan no l'utilitzeu durant períodes prolongats, guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa.

10. Solució De Problemes

11. Especificacions

12. Suport

For any issues or questions regarding your ASHATA 2x2 Video Wall Controller, please contact our customer support. We are committed to providing assistance and ensuring your satisfaction.

Please refer to your purchase platform or product packaging for specific contact details.