Digi-Pas DWL280PRO
Manual d'usuari del nivell de torpedes digital Digi-Pas DWL280PRO
Model: DWL280PRO
Introducció
The Digi-Pas DWL280PRO is a 3rd-generation innovative digital torpedo level designed for professional use. It features a robust, waterproof (IP67) and shock-proof design, advanced LED display technology, and a magnetic V-groove base. This manual provides essential information for the proper setup, operation, and maintenance of your DWL280PRO digital level.

Figure 1: Digi-Pas DWL280PRO Digital Torpedo Levels
This image shows two Digi-Pas DWL280PRO digital torpedo levels, highlighting their compact form factor and the clear, bright LED display. Each level features a traditional bubble vial alongside the digital readout, and is marked "WaterProof—IP67".
Configuració
Instal·lació de la bateria
The DWL280PRO operates on standard batteries. To install or replace batteries:
- Locate the battery compartment cover, typically on the rear or side of the device.
- Feu servir un tornavís petit o una moneda per obrir el compartiment.
- Introduïu piles noves, assegurant la polaritat correcta (+/-).
- Tanqueu de manera segura la tapa del compartiment de la bateria.
Encès inicial
Premeu el botó d'engegada (red button with power symbol) to turn on the device. The LED display will illuminate, showing the current angle or slope.
Instruccions de funcionament
Mesura Bàsica
Place the base of the DWL280PRO firmly on the surface you wish to measure. The digital display will instantly show the angle relative to horizontal. For vertical measurements, the display will automatically invert when the gauge is upside down, ensuring readability.

Figure 2: Measuring a Vertical Surface
This image demonstrates the use of the Digi-Pas DWL280PRO digital level for vertical measurements. A hand holds the level against a metal shelving unit, utilizing its magnetic V-groove base to securely attach to the surface. The bright LED display clearly shows a 90.00-degree reading, indicating a perfectly vertical alignment.
Canvi d'unitats de visualització
Premeu el botó UNIT button (blue button with two arrows) to cycle through different measurement units: degrees (°), slope (%), mm/M, and inch/FT.
Setting Reference Angle / Zero Function
To set a relative zero point, place the level on your desired reference surface and press the ZERO button (green gear icon). The display will show 0.00°, and subsequent measurements will be relative to this new zero.
Funció de timbre
The DWL280PRO features an audible buzzer that sounds at 0° or any user-set angle, providing an auditory cue for precise alignment.

Figure 3: Buzzer Indication
Aquesta imatge ofereix un primer pla view of the Digi-Pas DWL280PRO's bright LED display, showing a reading of 0.00 degrees. A prominent speaker icon is overlaid, indicating the active buzzer function which provides an audible alert when the level reaches 0 degrees or a user-defined angle.
Manteniment
Neteja
Netegeu el dispositiu amb un suau, damp cloth. Do not use abrasive cleaners or solvents. The DWL280PRO is waterproof (IP67), allowing for cleaning under running water if necessary, but ensure the battery compartment is securely sealed.

Figura 4: Característica impermeable
This image vividly illustrates the waterproof capability of the Digi-Pas DWL280PRO digital level. The device is shown partially submerged in water, with splashes around it, confirming its IP67 rating and suitability for use in wet environments or for easy cleaning.
Emmagatzematge
Store the level in a dry place, away from extreme temperatures and direct sunlight, when not in use for extended periods.
Resolució de problemes
- La pantalla no s'encén: Comproveu la instal·lació de les piles i assegureu-vos que no estiguin esgotades. Substituïu-les si cal.
- Lectures inexactes: Perform a user re-calibration. The DWL280PRO allows for easy re-calibration back to factory settings without special fixtures. Refer to the full product manual for detailed re-calibration steps.
- El brunzidor no sona: Ensure the buzzer function is enabled (if applicable) or check if the angle is within the set buzzer range.
Especificacions
| Característica | Detall |
|---|---|
| Marca | Digi Pass |
| Model | DWL280PRO |
| Material | PC ABS |
| Color | Metàl·lic |
| Mode d'operació | Automàtic |
| Resolution (0° & 90°) | ±0.05° |
| Resolution (Other Angles) | ±0.2° |
| Temperatura de funcionament | -4 °F a 140 °F (-20 °C a 60 °C) |
| Classificació impermeable | IP67 |
| Característiques | Magnetic V-groove base, Bright LED display, Auto-invert display, Buzzer |

Figure 5: Extreme Temperature Operation
This image shows the Digi-Pas DWL280PRO digital level in a snowy, cold outdoor setting, emphasizing its ability to operate in freezing temperatures. The graphic highlights an operating temperature range of -20°C to 60°C (-4°F to 140°F), showcasing its ruggedness for various environmental conditions.

Figura 6: Dimensions del producte
This image provides a visual representation of the Digi-Pas DWL280PRO's dimensions, showing a hand holding the level. An overlay indicates a height of 2.4 inches (6 cm), giving a clear idea of its compact size.
Garantia i Suport
For warranty information and technical support, please refer to the official Digi-Pas weblloc web o poseu-vos en contacte amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Visit the official Digi-Pas Store for more information: Digi-Pas Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.