Introducció
This manual provides essential information for the safe and effective operation and maintenance of your DEWALT D36000S 10-Inch Wet Tile Saw with Stand. Please read and understand all instructions before use to ensure proper function and to prevent injury.
The DEWALT D36000S is a high-capacity wet tile saw designed for professional tile installation. It offers a 37-inch rip cut capacity (41 inches with plunge) and an 8-1/2 inch crosscut capacity, suitable for various tile sizes including 36x36 inch tiles ripped in half, 6-inch sills, and 8x48 inch planks at a 30% offset. The integrated water tray system helps contain mess, making it suitable for indoor use. The saw and stand are designed for portability, weighing approximately 91 lbs.
Informació de seguretat
Seguiu sempre les precaucions de seguretat bàsiques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals. Mantingueu la vostra zona de treball neta i ben il·luminada. No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables. Mantingueu els nens i els vianants allunyats mentre feu servir una eina elèctrica.
Seguretat elèctrica
- Ensure the power cord is compatible with the power source and is properly grounded.
- Eviteu el contacte del cos amb superfícies aterrades com ara canonades, radiadors, fogons i neveres.
- No exposar les eines elèctriques a la pluja o a condicions humides. L'entrada d'aigua en una eina elèctrica augmentarà el risc de descàrrega elèctrica.
- No abuseu del cordó. No utilitzeu mai el cable per transportar, estirar o desconnectar l'eina elèctrica. Mantingueu el cable allunyat de la calor, l'oli, les vores afilades o les peces mòbils.
Seguretat personal
- Porteu sempre protecció ocular (ulleres o ulleres de seguretat) i protecció auditiva.
- Wear appropriate clothing. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
- Estigueu alerta, observeu el que feu i feu servir el sentit comú quan utilitzeu una eina elèctrica.
- No sobrepasseu. Mantingueu els peus i l'equilibri adequats en tot moment.
Saw Specific Safety
- Always ensure the blade guard is in place and functioning correctly.
- Use only blades recommended for wet cutting of tile and masonry.
- Never attempt to cut material freehand. Always use the rip fence or miter guide.
- Ensure the water pump is submerged and functioning to provide adequate cooling and dust suppression during operation.
- Disconnect power before changing blades or performing any maintenance.
Components
The DEWALT D36000S Wet Tile Saw includes the following components:
- D36000 Wet Tile Saw Unit
- D24001 Stand
- DW4764 Porcelain Tile Blade
- Bomba d'aigua submergible
- Panera d’aigua
- Side Water Trays
- Rear Water Trays
- Cutting Cart Side Extension
- Angle/Rip Guide
- Clau de fulla
- Llave hexagonal
Configuració
Una configuració adequada és crucial per a un funcionament segur i precís.
1. Assemble the Stand
Unfold the D24001 stand and ensure all locking mechanisms are securely engaged. Place the stand on a firm, level surface.
2. Mount the Saw to the Stand
Carefully lift the D36000 saw unit and align it with the mounting points on the stand. Secure the saw to the stand using the provided hardware. Ensure the saw is stable and does not wobble.
Figure 1: Fully assembled DEWALT D36000S Wet Tile Saw on its stand.
3. Install Water Trays and Pump
Attach the water pan, side water trays, and rear water trays to the saw unit. Ensure they are properly seated to prevent leaks. Place the submersible pump into the water pan and connect its hose to the saw's water delivery system.
Figura 2: De dalt a baix view of the saw, illustrating the placement of the water trays for effective water management.
4. Install Blade
Ensure the saw is unplugged. Use the blade wrench to loosen the arbor nut. Install the DW4764 Porcelain Tile Blade, ensuring the rotation direction matches the arrow on the saw. Tighten the arbor nut securely.
5. Fill Water Reservoir
Fill the water pan with clean water until the submersible pump is fully submerged and the water level is adequate for operation. Regularly check and refill the water during use.
Vídeo 1: Un overview of the DEWALT D36000S Wet Tile Saw with Stand, demonstrating its features and setup.
Instruccions de funcionament
Familiarize yourself with the saw's controls and cutting capabilities before beginning work.
1. Adjusting for Cuts
- Rip Cuts: For straight cuts along the length of the tile, use the rip fence. The saw offers a 37-inch rip cut capacity, extendable to 41 inches with plunge cuts. The 18-inch cutting clearance to the left of the blade allows for ripping 36x36 inch tiles in half.
- Crosscuts: For cuts across the width of the tile, use the miter guide. The saw has an 8-1/2 inch crosscut capacity, ideal for 6-inch sills and 8x48 inch planks at a 30% offset.
- Talls a biaix: Adjust the miter guide for angled cuts. The saw supports various miter angles.
Figure 3: Detail of the miter adjustment lever, allowing for precise angle settings for various cuts.
2. Realització d'un tall
- Place the tile firmly against the rip fence or miter guide on the cutting cart.
- Ensure the water pump is running and water is flowing to the blade.
- Turn on the saw. Allow the blade to reach full speed before beginning the cut.
- Slowly and steadily push the cutting cart and tile through the blade. Do not force the cut.
- Maintain a firm grip on the tile throughout the cutting process.
- Once the cut is complete, turn off the saw and wait for the blade to stop before removing the tile.
Figure 4: The cutting cart lock mechanism, ensuring stability during precise cuts.
Manteniment
Regular maintenance ensures the longevity and performance of your tile saw.
1. Neteja
- After each use, disconnect the saw from power.
- Drain the water pan using the easy-to-remove plug.
- Rinse all water trays, the cutting cart, and the blade area to remove tile slurry and debris.
- Clean the submersible pump to prevent clogging.
- Wipe down all surfaces to prevent rust and buildup.
2. Cura de la fulla
- Inspect the blade for wear, damage, or dullness before each use.
- Replace worn or damaged blades promptly. Refer to the 'Install Blade' section for replacement instructions.
- Guardeu les fulles correctament per evitar danys.
3. Inspecció General
- Comproveu periòdicament tots els elements de fixació per estar estancats.
- Inspeccioneu el cable d'alimentació per detectar qualsevol signe de dany.
- Ensure the cutting cart slides smoothly. Lubricate if necessary with a suitable lubricant.
Figure 5: Integrated storage for accessories like wrenches and the miter guide, located beneath the saw for convenience.
Resolució de problemes
Aquesta secció tracta problemes comuns que podeu trobar.
| Problema | Causa possible | Solució |
|---|---|---|
| La serra no arrenca | Sense corrent, interruptor defectuós, interruptor automàtic saltat | Check power connection, test outlet, reset breaker, contact service if switch is faulty. |
| Blade not cutting efficiently or chipping tiles | Dull or incorrect blade, insufficient water flow, feeding too fast | Replace blade, ensure pump is working and water is flowing, reduce feed rate. |
| Water not flowing to blade | Clogged pump, kinked hose, low water level | Clean pump, check hose for obstructions, refill water pan. |
| Talls imprecisos | Loose fence/guide, worn blade, unstable setup | Tighten fence/guide, replace blade, ensure saw and stand are stable. |
Especificacions
Key technical specifications for the DEWALT D36000S Wet Tile Saw:
- Número de model: D36000S
- Font d'alimentació: Elèctric amb cable
- Motor: 15 Amp, 1220 MWO
- Voltage: 120 V
- Wattage: 1800 watts
- Velocitat: 4200 RPM
- Diàmetre de la fulla: 10 polzades
- Capacitat de tall longitudinal: 37 inches (41 inches with plunge)
- Crosscut Capacity: 8-1/2 polzades
- Precisió: 1/32 inch over 30 inches
- Pes de l'article: 91 lliures
- Dimensions de l'article (L x A x A): 36 cm de llargada x 31 cm d'amplada x 28.75 cm d'alçada
- Material de la fulla: Stainless Steel (for included blade)
- Recomanació de superfície: Porcellana
- Característiques especials: Brake, Integrated storage, Water tray system
- Certificació: UL
Garantia i Suport
For warranty information, service, or technical support, please refer to the official DEWALT weblloc web o poseu-vos en contacte directament amb el servei d'atenció al client de DEWALT. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.