Introducció
This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics 40W Waterproof LED Outdoor Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
Informació de seguretat
- ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
- Aquest producte s'ha d'instal·lar d'acord amb el codi d'instal·lació aplicable per una persona familiaritzada amb la construcció i el funcionament del producte i els perills que comporta.
- Ground the fixture properly to avoid potential electrical shock and to ensure reliable operation.
- No connecteu a un interruptor regulador d'intensitat.
- No mireu directament a la font de llum LED.
- Assegureu-vos que totes les connexions estiguin segures i aïllades correctament.
- Rang de temperatura de funcionament: de -20 °C a 40 °C (de -4 °F a 104 °F).
Contingut del paquet
- Amazon Basics 40W LED Outdoor Motion Sensor Security Light (1 unit)
- Maquinari de muntatge (cargols, femelles de cable)
- Manual d'instruccions
Característiques del producte
The Amazon Basics 40W LED Outdoor Motion Sensor Security Light is designed for reliable outdoor illumination with energy efficiency and adjustable features.
- Alt Brillantor: 2 ultra-bright LED light heads produce up to 4000 lumens at 5000K daylight color temperature.
- Detecció de moviment: Integrated motion sensor with up to 180° detection angle and a range of up to 49 feet.
- Disseny ajustable: LED heads are flexibly adjustable 350° horizontally and 60° vertically. The motion sensor is adjustable 180° horizontally and 90° vertically.
- Construcció duradora: Aluminum design for effective heat dissipation and a bulb lifespan of up to 50,000 hours.
- Resistent a la intempèrie: Waterproof rating ensures resilience against rain, sleet, or snow.
- Certificat ETL: Meets safety and quality standards.
Imatge: Frontal view of the Amazon Basics 40W LED Outdoor Motion Sensor Security Light, highlighting its two adjustable light heads and motion sensor.
Configuració
Follow these steps for proper installation of your security light. Professional installation is recommended if you are unfamiliar with electrical wiring.
- Preparació per a la instal·lació:
- Turn off power at the circuit breaker or fuse box before beginning installation.
- Assegureu-vos que la superfície de muntatge sigui estable i que pugui suportar el pes del dispositiu.
- Muntar l'aparell:
- Connecteu el suport de muntatge a la caixa de connexió amb els cargols proporcionats.
- Connect the electrical wires: black to black (live), white to white (neutral), and green/bare copper to ground. Secure connections with wire nuts.
- Carefully push the wires into the junction box and secure the fixture to the mounting bracket.
- Ajustar els capçals de llum i el sensor:
- Loosen the adjustment screws on the light heads and motion sensor.
- Position the light heads to cover the desired illumination area.
- Angle the motion sensor to optimize detection coverage, typically pointing slightly downwards.
- Tighten all adjustment screws securely.
- Restaura l'alimentació: Torneu a encendre l'alimentació al disjuntor.
Image: The security light installed on the exterior wall of a building, illuminating the area below.
Instruccions de funcionament
The motion sensor has adjustable settings to customize its operation.
- Configuració HORA: This dial controls how long the light remains on after motion is detected. Adjust from 5 seconds to 12 minutes.
- LUX (Daylight) Setting: This dial determines the ambient light level at which the motion sensor becomes active.
- Turn towards the "Sun" symbol for activation during both day and night.
- Turn towards the "Moon" symbol for activation only during nighttime or low-light conditions.
- Engegada inicial: Upon first power-up, the light may stay on for a short period (e.g., 5 minutes) as it calibrates. After this initial period, it will operate according to your chosen settings.
Manteniment
- Neteja: Netegeu l'aparell amb un suau, damp drap. No utilitzeu productes de neteja abrasius ni dissolvents. Assegureu-vos que l'alimentació estigui apagada abans de netejar.
- Inspecció: Periodically check for loose wiring or damaged components. Replace any damaged parts immediately.
- LED: The integrated LED bulbs are designed for long life and are not user-replaceable.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No power; faulty wiring; LUX setting too high (daylight). | Check circuit breaker; verify wiring connections; adjust LUX setting towards "Moon" symbol. |
| La llum es manté encesa contínuament. | Motion sensor continuously triggered; TIME setting too long; LUX setting too low (always active). | Adjust sensor angle to avoid constant triggers; reduce TIME setting; adjust LUX setting towards "Sun" symbol. |
| La llum parpelleja o s'atenua. | Loose wiring connection; power fluctuations. | Check and secure all wiring connections; consult an electrician if power fluctuations persist. |
| L'abast del sensor de moviment és deficient. | Sensor obstructed; incorrect angle; environmental factors (temperature). | Clear obstructions; adjust sensor angle; consider environmental conditions. |
Especificacions
| Número de model | SM-4000-180-2H |
| Marca | Conceptes bàsics d'Amazon |
| Wattage | 40W |
| Brillantor | 4000 lúmens |
| Temperatura de color | 5000K de llum del dia |
| Angle de detecció | Fins a 180° |
| Interval de detecció | Fins a 49 peus |
| Voltage | 120 Volts |
| Material | Alumini, plàstic |
| Nivell de resistència a l'aigua | Impermeable |
| Certificacions | Certificat ETL |
| Dimensions de l'article (L x A x A) | 14.96" x 6.3" x 5.12" |
| Pes de l'article | 1.9 lliures |
Garantia i Suport
For warranty information or technical support, please refer to the Amazon Basics product page or contact Amazon customer service. Keep your purchase receipt for warranty claims.