JB Systems CLUBWASH 2 Moving Wash Light

1. Introducció

This manual provides detailed instructions for the safe and efficient operation of your JB Systems CLUBWASH 2 Moving Wash Light. This professional lighting fixture features 12 powerful 12W LEDs, offering RGBWA+UV color mixing, integrated show programs, various strobe effects, and dimming capabilities. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the device.

2. Instruccions de seguretat

Observeu les següents precaucions de seguretat per evitar descàrregues elèctriques, incendis o danys a la unitat.

• Connecteu sempre la unitat a una presa de corrent amb connexió a terra.
• Assegureu-vos que el voltage de la font d'alimentació coincideix amb el voltage especificat a la unitat.
• Disconnect the unit from the main power supply before any service, cleaning, or maintenance.
• Do not expose the unit to rain or moisture. This unit is for indoor use only.
• Assegureu-vos que hi hagi una ventilació adequada. No bloquegeu les obertures de ventilació.
• Eviteu l'exposició directa dels ulls a la font de llum.
• Mount the unit securely using appropriate clamps i cables de seguretat.
• Demaneu tot el servei a personal qualificat.

3. Contingut del paquet

Verifiqueu que hi hagi tots els elements en desempaquetar:

• 1 x JB Systems CLUBWASH 2 Moving Wash Light unit
• 1 x cable d'alimentació
• 1 x Manual d'usuari (aquest document)

4. Producte acabatview

Familiarize yourself with the components and connections of your CLUBWASH 2.

4.1 Davant View

Figura 1: Frontal view of the CLUBWASH 2 with LEDs off. This image shows the main body, the 12 LED lenses, and the control panel at the base.

Figura 2: Frontal view of the CLUBWASH 2 with LEDs illuminated in red, demonstrating its color mixing capabilities.

4.2 Darrera View i connexions

Figure 3: Rear panel of the CLUBWASH 2, showing the DMX IN, DMX OUT, and Power IN connections, along with the cooling fan and product labels.

• Matriu de LED: 12 x 12W RGBWA+UV LEDs for powerful color output.
• Tauler de control: Digital display and buttons for menu navigation and settings.
• DMX IN (3-pin XLR): For connecting to a DMX controller.
• DMX OUT (3-pin XLR): For daisy-chaining to other DMX fixtures.
• Power IN (IEC): Per connectar la font d'alimentació principal.
• Ventilador de refrigeració: Garanteix una temperatura òptima de funcionament.

5. Configuració

5.1 Muntatge

The CLUBWASH 2 can be mounted in various orientations (truss, floor, wall) using appropriate clamps and brackets (not included). Always ensure the mounting surface or structure can support the weight of the fixture. Use a safety cable (not included) as a secondary attachment to prevent accidental drops.

5.2 Connexió d'alimentació

Connect the supplied power cable to the Power IN socket on the rear of the unit and then to a suitable grounded power outlet. Ensure the local voltage matches the unit's requirements (AC 90-240V, 50/60Hz).

5.3 Connexió DMX

For DMX control, connect a 3-pin XLR cable from your DMX controller's output to the DMX IN socket of the first CLUBWASH 2 unit. To daisy-chain multiple units, connect a DMX cable from the DMX OUT of the first unit to the DMX IN of the next. The last unit in the chain should have a DMX terminator connected to its DMX OUT socket to prevent signal reflection.

6. Funcionament del tauler de control

The control panel, located at the base of the unit, features a digital display and four buttons for navigation:

• MENÚ: Accesses the main menu or goes back to the previous menu level.
• AMUNT: Navigates up through menu options or increases parameter values.
• BAIX: Navigates down through menu options or decreases parameter values.
• ENTRAR: Confirma una selecció o entra a un submenú.

The display shows the current mode or parameter value. Use the UP/DOWN buttons to change values and ENTER to confirm.

7. Modes de funcionament

7.1 Mode autònom

The CLUBWASH 2 features built-in programs that can operate without an external DMX controller. Access these programs via the control panel. Some programs may also be sound-activated, utilizing an internal microphone to synchronize with music.

7.2 Mode mestre/esclau

In Master/Slave mode, one unit (the Master) controls other units (the Slaves). Connect the DMX OUT of the Master unit to the DMX IN of the first Slave unit, and continue daisy-chaining. Set the Master unit to a standalone program, and set all Slave units to 'Slave' mode via their control panels.

7.3 Mode DMX

For precise control, connect the CLUBWASH 2 to a DMX controller. Each unit requires a unique DMX start address. Set the DMX address via the control panel. Refer to the DMX Channel Chart for specific control functions.

8. DMX Channel Chart

The CLUBWASH 2 typically operates with a 16-channel DMX profile. Below is a common channel assignment:

9. Beam Angle Information

Understanding the beam characteristics is important for optimal light placement and coverage.

Figure 4: Diagram illustrating the beam angle and light intensity (LUX) at various distances for the CLUBWASH 2. The diagram shows a consistent beam angle of 25°.

This diagram indicates the light intensity (LUX) at different distances from the fixture. For example, at 1 meter, the LUX is approximately 12898, with a beam diameter of 44 cm. As the distance increases, the LUX decreases, and the beam diameter expands. The CLUBWASH 2 maintains a 25° beam angle.

10. Manteniment

Regular maintenance ensures the longevity and optimal performance of your CLUBWASH 2.

• Neteja: Netegeu periòdicament les lents i la part exterior del casing with a soft, lint-free cloth. Do not use abrasive cleaners.
• Ventilació: Ensure the cooling fan and ventilation openings are free from dust and debris. Use compressed air to clean if necessary.
• Cable Checks: Regularly inspect power and DMX cables for any signs of damage. Replace damaged cables immediately.
• Emmagatzematge: When not in use, store the unit in a dry, dust-free environment.

11. Solució De Problemes

Si teniu problemes, consulteu els següents problemes i solucions habituals:

• Sense energia:
  • Comproveu si el cable d'alimentació està connectat correctament tant a la unitat com a la presa de corrent.
  • Comproveu que la presa de corrent funcioni.
  • Check the fuse on the unit (if accessible and user-replaceable).
• Sense control DMX:
  • Ensure DMX cables are correctly connected (DMX OUT to DMX IN).
  • Verifiqueu que l'adreça DMX de la unitat coincideixi amb l'adreça configurada al controlador.
  • Check for a DMX terminator on the last unit in the chain.
  • Test DMX cables for continuity.
• Sortida de color incorrecta:
  • In DMX mode, check the DMX values for the individual color channels.
  • In standalone mode, try resetting the unit or selecting a different program.
• Sobreescalfament de la unitat:
  • Assegureu-vos que les obertures de ventilació no estiguin bloquejades.
  • Operate the unit in an environment with adequate airflow.

If problems persist, contact your dealer or qualified service personnel.

12. Especificacions

• Model de producte: CLUBWASH 2
• Font de llum: 12 x 12W RGBWA+UV LEDs
• Barreja de colors: Vermell, verd, blau, blanc, ambre, UV
• Modes de funcionament: DMX, Standalone, Master/Slave, Sound-activated
• Canals DMX: 16 channels (typical)
• Moviment de panoràmica: 540°
• Moviment d'inclinació: 270°
• Angle del feix: 25°
• Font d'alimentació: CA 90-240V, 50/60Hz
• Consum d'energia: Approximately 150W (Max)
• Dimensions: 31.5 x 26 x 20 cm (12.4 x 10.2 x 7.9 polzades)
• Pes: 3.9 kg (8.6 lliures)
• Material de l'habitatge: Plàstic

13. Garantia i Suport

For warranty information and technical support, please refer to the terms and conditions provided by your retailer or contact JB Systems directly through their official weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.