ECOXGEAR GDI-EXEGPL410

ECOXGEAR EcoEdge Plus User Manual

Model: GDI-EXEGPL410

1. Introducció

The ECOXGEAR EcoEdge Plus is a rugged, waterproof, and portable Bluetooth wireless smart speaker designed for outdoor adventures. It features a multi-mode LED party light function, a built-in bottle opener, and offers robust sound performance. This manual provides essential information for setting up, operating, and maintaining your EcoEdge Plus speaker.

ECOXGEAR EcoEdge Plus speaker, gray, with blue LED lights illuminated on the front speaker grille.

Figure 1: ECOXGEAR EcoEdge Plus Speaker

2. Característiques clau

  • 100% Waterproof and Dustproof: Meets IP67 international standards, making it resistant to rain, dirt, and snow. It floats, ensuring it won't sink in water.
  • Integrated Rubber Shocks: Protects the speaker from impacts and rugged use.
  • Obridor d'ampolles integrat: Conveniently located on the bottom right bumper.
  • Multi-mode LED Party Lights: Enhances your listening experience with dynamic lighting.
  • Long Range Bluetooth: Stream music from up to 100 feet away.
  • Versatile Audio Sources: Connect via Bluetooth or wired 1/8-inch (3.5mm) AUX-IN.
  • Sortida d'àudio potent: 20 watts max output power with a full-range speaker and 3-inch rear-facing passive woofer for balanced sound.
  • ECOCONNECT Compatible: Wirelessly link two ECOXGEAR speakers for TrueWireless Stereo (TWS) sound up to 30 feet apart.
  • ECOTALK Feature: Built-in microphone for smart speaker capability (Siri, Google) and speakerphone functionality.
  • Temps de joc ampliat: Up to 20+ hours at low volume, or 10+ hours at full volume.
  • Recàrrega ràpida: Es recarrega completament en aproximadament 3 hores.
  • Mount Attachment Point: Universal 1/4-20 mount for accessories (sold separately).
  • Accessoris inclosos: Carry lanyard with carabiner.

3. Guia de configuració

3.1 Càrrega de l'altaveu

Before first use, fully charge your EcoEdge Plus speaker. The battery fully recharges in approximately 3 hours.

  1. Locate the charging port cover on the side of the speaker.
  2. Carefully open the rubber cover to expose the charging port and AUX-IN port.
  3. A baix view of the ECOXGEAR EcoEdge Plus speaker showing the rubber flap covering the charging and AUX ports.

    Figura 2: Ubicació del port de càrrega

  4. Connecteu el cable de càrrega proporcionat a l'altaveu i a una font d'alimentació USB compatible.
  5. The LED indicator will show charging status. Once fully charged, disconnect the cable and securely close the rubber cover to maintain waterproofing.

3.2 Emparellament inicial de Bluetooth

Pair your EcoEdge Plus with your Bluetooth-enabled device to stream audio wirelessly.

  1. Manteniu premut el botó d'engegada () on the speaker to turn it on.
  2. The speaker will automatically enter Bluetooth pairing mode. The Bluetooth indicator light will flash.
  3. A dalt view of the ECOXGEAR EcoEdge Plus speaker showing the control panel with power, Bluetooth, volume, track, and speakerphone buttons.

    Figura 3: Tauler de control

  4. On your device (smartphone, tablet, etc.), go to Bluetooth settings and select "ECOEDGE PLUS" from the list of available devices.
  5. Once paired, the Bluetooth indicator light on the speaker will become solid, and you will hear an audible confirmation.

4. Instruccions de funcionament

4.1 Controls i funcions

Botó/FuncióFunció
Botó d'engegadaPress and hold to turn On/Off.
Botó BluetoothPress to enter pairing mode or disconnect current device.
Pujar/Bajar el volumAjusta el volum de l'àudio.
Seguiment cap endavant / cap enrereSalta a la pista següent o anterior.
Reproduir/PausaPlay or pause current audio.
ECOTALK ButtonActivate voice assistant (Siri/Google) or answer/end calls.
Llums de festa LEDCycle through different light modes or turn off.
Obridor d'ampollesIntegrated into the bottom right bumper for opening bottles.

4.2 ECOCONNECT (TrueWireless Stereo)

The ECOCONNECT feature allows you to link two ECOXGEAR speakers for a true wireless stereo experience.

  1. Ensure both ECOXGEAR speakers are powered on and not connected to any Bluetooth device.
  2. On one speaker (this will be your primary speaker), press and hold the ECOCONNECT button until you hear a tone.
  3. On the second speaker, press the ECOCONNECT button briefly.
  4. The speakers will attempt to connect. Once connected, you will hear a confirmation tone, and the ECOCONNECT indicator lights will be solid.
  5. Now, connect your device to the primary speaker via Bluetooth. Audio will play through both speakers in stereo.

Note: ECOCONNECT only supports Bluetooth audio. AM/FM and AUX-IN are not supported when using ECOCONNECT.

4.3 Using the AUX-IN Port

For wired audio playback, use the 1/8-inch (3.5mm) auxiliary audio input jack.

  1. Open the rubber cover on the side of the speaker.
  2. Connect a 3.5mm audio cable from your audio source to the AUX-IN port on the speaker.
  3. The speaker will automatically switch to AUX-IN mode.
  4. Adjust volume using the speaker's controls or your audio source.

5. Manteniment

5.1 Waterproofing Care

To maintain the IP67 waterproof rating, ensure all rubber covers (for charging port, AUX-IN) are securely closed before exposing the speaker to water or dust. Do not submerge the speaker if covers are not properly sealed.

5.2 Neteja

Netegeu l'altaveu amb un suau, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as they may damage the finish or rubber seals.

5.3 Emmagatzematge

When storing the speaker for extended periods, ensure it is fully charged and stored in a cool, dry place away from direct sunlight.

6. Solució De Problemes

  • Sense energia: Ensure the battery is charged. Connect the speaker to a power source and allow it to charge for at least 30 minutes before attempting to power on.
  • Sense connexió Bluetooth:
    • Ensure the speaker is in pairing mode (flashing Bluetooth light).
    • Comproveu que el Bluetooth estigui habilitat al vostre dispositiu.
    • Acosta l'altaveu al dispositiu (a menys de 100 metres).
    • Forget "ECOEDGE PLUS" from your device's Bluetooth list and try pairing again.
    • Reinicieu tant l'altaveu com el dispositiu.
  • Mala qualitat de so / Distorsió:
    • Reduce the volume on either the speaker or your connected device.
    • Ensure the speaker is not obstructed and is placed on a stable surface.
    • If using AUX-IN, check the cable for damage and ensure it's fully inserted.
  • ECOCONNECT Not Working:
    • Ensure both speakers are ECOCONNECT compatible.
    • Make sure neither speaker is already connected to a Bluetooth device before attempting ECOCONNECT pairing.
    • Keep speakers within 30 feet of each other for optimal connection.

7. Especificacions

CaracterísticaDetall
Nom del modelEcoEdge Plus
Número de model de l'articleGDI-EXEGPL410
MarcaECOXGEAR
Tecnologia de connectivitatBluetooth, AUX-IN
Tecnologia de comunicació sense filsBluetooth
Interval BluetoothFins a 100 peus
Potència de sortida màxima dels altaveus20 watts
Diàmetre del subwoofer3 polzades
Durada de la bateria10+ hours (full volume), 20+ hours (low volume)
Temps de càrrega3 hores
Nivell de resistència a l'aiguaImpermeable (IP67)
Dimensions del producte2.3 "P x 5.5" W x 5.5" H
Pes de l'article1.12 lliures (18 unces)
UPC819127013738

8. Garantia i Suport

The ECOXGEAR EcoEdge Plus comes with a 1 anys de garantia de peces i mà d'obra. For warranty claims or technical support, please refer to the contact information provided with your product packaging or visit the official ECOXGEAR weblloc.

Pot ser que hi hagi plans de protecció addicionals disponibles per a la compra:

  • Pla de protecció de 2 anys
  • Pla de protecció de 3 anys
  • Pla de protecció completa (facturació mensual)

Per a més informació, visiteu el ECOXGEAR Store on Amazon.

© 2024 ECOXGEAR. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.