Reverie RC-WM-103 Adjustable Bed Remote Control Instruction Manual

Introducció

This manual provides essential instructions for the setup, operation, and maintenance of your Reverie RC-WM-103 Replacement Remote Control for adjustable bed bases. This remote is designed as an exact OEM replacement for Reverie 5i, 5D, 7S, R400, or 4M adjustable bed bases. Please review this manual thoroughly to ensure proper functionality and compatibility.

Important: Ensure your original remote matches the appearance of this remote exactly, including the logo, for guaranteed compatibility. This remote is not compatible with old Tempurpedic bases, even if buttons appear similar.

Informació de seguretat

• Mantingueu el comandament a distància allunyat de l'aigua i de la humitat excessiva.
• No exposeu el comandament a distància a temperatures extremes.
• Eviteu deixar caure el comandament a distància ni sotmetre'l a impactes forts.
• Mantingueu les piles fora de l'abast dels nens.
• Eliminar les piles velles de manera responsable d'acord amb la normativa local.

Configuració

1. Desembalatge

Carefully remove the remote control from its packaging. Inspect for any visible damage. If damage is present, contact your retailer.

2. Instal·lació de la bateria

El comandament a distància requereix dues piles AAA (no incloses). Per instal·lar-lo:

1. Localitza la tapa del compartiment de les piles a la part posterior del comandament a distància.
2. Feu lliscar la coberta en la direcció indicada per la fletxa.
3. Insert two AAA batteries, ensuring the correct polarity (+ and -) as marked inside the compartment.
4. Torneu a col·locar la tapa del compartiment de la bateria fins que sentiu un clic i quedi ben fixada al seu lloc.

3. Pairing/Syncing the Remote Control

To establish communication between your new remote and the adjustable bed base, follow these pairing instructions:

1. Ensure the bed base is plugged into a working power outlet.
2. Locate the control box under your adjustable bed base. This box typically has a small button, often labeled "PAIR," "LEARN," or "SYNC." It might be recessed and require a pen tip to press.
3. Press and hold the pairing button on the control box for approximately 3 seconds. The indicator light on the control box should begin to flash.
4. Immediately after the light starts flashing, press and hold any button on your new remote control (e.g., "HEAD UP" or "FLAT") for 3-5 seconds.
5. Release the button on the remote. The indicator light on the control box should stop flashing, indicating successful pairing.
6. Test the remote by pressing various function buttons to ensure the bed base responds correctly.

Note: If pairing is unsuccessful, repeat the steps. Some older bed bases may require pressing the pairing button on the control box with a pen tip.

Funcionament del comandament a distància

The Reverie RC-WM-103 remote control provides intuitive control over your adjustable bed's functions. Refer to the image below for button layout and descriptions.

This image displays the Reverie RC-WM-103 remote control. On the left is the older black version, and on the right is the new gray OEM version, which is the replacement model. Both remotes feature buttons for head and foot adjustments, lift, massage, and preset positions.

Funcions del botó:

• HEAD UP/DOWN Arrows: Ajusta el capçal del llit cap amunt o cap avall.
• FOOT UP/DOWN Arrows: Ajusta la secció dels peus del llit cap amunt o cap avall.
• ASCENSOR: Activates a quick lift function for the entire bed or a specific preset.
• PIS: Torna el llit a una posició completament plana.
• MASSAGE (HEAD/FOOT): Activates or adjusts massage functions for the head or foot sections.
• MASSAGE (WAVE/PULSE/STEADY): Controls different massage modes.
• PRESET Buttons (1, 2, 3): Recalls pre-programmed favorite positions.
• ZERO GRAVITY (if present): Elevates the head and foot to a position that mimics weightlessness, reducing pressure on the body.

Manteniment

Neteja:

Netegeu el comandament a distància amb un drap suau i sec. No utilitzeu netejadors líquids ni materials abrasius, ja que poden danyar la superfície o els components interns.

Substitució de la bateria:

Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA). Do not mix old and new batteries or different battery types.

Resolució de problemes

El comandament a distància no respon:

• Comproveu les bateries: Assegureu-vos que les piles estiguin correctament instal·lades i que no estiguin esgotades. Substituïu-les si cal.
• Re-Pair Remote: Follow the "Pairing/Syncing the Remote Control" steps in the Setup section to re-establish connection.
• Font d'alimentació: Verify that the adjustable bed base is properly plugged into a working power outlet.
• Obstruccions: Ensure there are no objects blocking the signal path between the remote and the bed base.

Bed Base Not Moving Smoothly:

• Comproveu si hi ha obstruccions: Ensure no objects are under or around the bed base that could impede its movement.
• Cicle d'alimentació: Unplug the bed base from the power outlet for 30 seconds, then plug it back in.

If problems persist after attempting these troubleshooting steps, contact customer support.

Especificacions

Garantia i Suport

For warranty information or technical assistance, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.

Per a més ajuda, podeu visitar el Reverie Adjustable Bed Remotes store on Amazon or refer to the contact information provided with your original bed base documentation.